Electraline 58106 Digital Daily Programmer Timer

1. Product Overview

The Electraline 58106 is a versatile 24-hour digital daily programmer timer designed to automate the switching on and off of electrical devices. It features a 30-minute programming interval, an Italian 16A bivalent socket (10/16A) compatible with 230V systems, and supports a maximum load of 1800W. This timer is ideal for energy saving and enhancing home safety by controlling connected appliances.

Figure 1: Front view of the Electraline 58106 Digital Daily Programmer Timer, showing the digital display, control buttons, and Italian bivalent socket.

2. Setup and Initial Configuration

Follow these steps to set up your Electraline 58106 Digital Daily Programmer Timer:

1. Insert into Socket: Plug the timer into a standard 230V Italian wall socket. The display will illuminate.
2. Set Current Time:
   • Press and hold the + button to enter time setting mode.
   • Use the + and - buttons to adjust the hour and minute.
   • Press the OK button to confirm each setting.
3. Program On/Off Intervals:
   • Press the PROG button to enter programming mode.
   • The display will show segments representing 30-minute intervals throughout the 24-hour cycle.
   • Use the + and - buttons to select the desired 30-minute segments for the timer to be ON. Filled segments indicate ON, empty segments indicate OFF.
   • Press OK to confirm the selected interval. You can set multiple ON/OFF periods throughout the day.
   • To quickly fill or clear multiple segments, press and hold the + or - button.
4. Select Operating Mode:
   • Press the ON/OFF/AUTO button (labeled OK) repeatedly to cycle through the operating modes:
     • ON: The connected device will remain continuously ON.
     • OFF: The connected device will remain continuously OFF.
     • AUTO: The connected device will operate according to your programmed ON/OFF intervals. Ensure the timer is in AUTO mode for programmed operation.

Figure 2: The timer's display indicating the 30-minute programming intervals for daily operation.

3. Operating the Timer

Once configured, the timer operates automatically in AUTO mode. You can manually override the programmed settings at any time:

• Manual Override: Press the ON/OFF/AUTO button (labeled OK) to switch between ON, OFF, and AUTO modes. This allows you to temporarily keep a device on or off, regardless of the set program.
• Reset Button: The small 'R' button (often recessed) is for resetting the timer to its factory default settings. Use a pointed object (like a pen tip) to press it if a full reset is required. Note that this will erase all programmed settings.

Figure 3: The timer is capable of handling up to 24 daily programs, allowing for flexible scheduling.

4. Maintenance

The Electraline 58106 Digital Daily Programmer Timer requires minimal maintenance:

• Cleaning: Wipe the timer with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Power Outage: The timer is equipped with an internal battery that retains programmed settings and the current time for several hours in case of a power outage. No user intervention is required for this feature.
• Storage: If storing the timer for an extended period, ensure it is kept in a cool, dry place away from direct sunlight.

5. Troubleshooting

If you encounter issues with your timer, consider the following:

• Timer Not Turning On/Off:
  • Ensure the timer is securely plugged into a live wall socket.
  • Verify that the timer is set to AUTO mode for programmed operation. If it's in ON or OFF mode, it will override the program.
  • Check your programmed intervals. Ensure the segments for ON times are correctly filled.
• Incorrect Time/Program:
  • Re-enter the current time as described in the "Setup" section.
  • Review and re-program your ON/OFF intervals carefully.
  • If settings are lost frequently, ensure the internal battery is functioning (it should retain settings during short power cuts). If issues persist, a full reset using the 'R' button might be necessary, followed by re-programming.
• Device Not Responding:
  • Ensure the connected device is properly plugged into the timer and is functioning correctly when plugged directly into a wall socket.
  • Verify that the connected device's power consumption does not exceed the timer's maximum load of 1800W.
• Minimum Interval: Remember that the minimum programming interval for this timer is 30 minutes. It cannot be set for shorter periods (e.g., 10 or 15 minutes).

6. Specifications

7. Warranty and Support

For information regarding warranty coverage, technical support, or service inquiries for your Electraline 58106 Digital Daily Programmer Timer, please contact Electraline customer service directly. Refer to the product packaging or the official Electraline website for the most up-to-date contact information.

You can typically find support contact details on the manufacturer's official website: www.electraline.com