1. Introduction
This manual provides essential information for the safe and effective use of your Parkside PAP14.4 Li-Ion battery. This powerful 14.4V, 1.5Ah battery is designed for use with the Parkside 4-in-1 combination unit, model PKGA 14.4 A1. Please read these instructions carefully before first use and keep them for future reference.
2. Safety Instructions
Always observe the following safety precautions to prevent personal injury and damage to the battery or tool.
- General Safety:
- Do not open, disassemble, or modify the battery.
- Keep the battery away from children.
- Protect the battery from moisture and water.
- Do not expose the battery to direct sunlight or temperatures above 45°C (113°F).
- Do not short-circuit the battery terminals.
- Do not throw the battery into fire.
- Only use the battery with compatible Parkside tools and chargers.
- In case of damage or leakage, do not touch the battery and dispose of it properly.
- Charging:
- Charge the battery only with the charger specified by Parkside.
- Do not charge the battery in flammable environments.
- Monitor the battery during charging.
- Disposal:
- Batteries must not be disposed of with household waste.
- Return defective or used batteries to designated collection points for recycling.
3. Product Overview
The Parkside PAP14.4 is a powerful Li-Ion battery designed for reliable performance with your Parkside 4-in-1 combination tool. Its compact design ensures ease of use and portability.
Image 1: Parkside PAP14.4 Li-Ion Battery. The image displays the underside of the battery, clearly showing the model number PAP14.4, voltage 14.4V, capacity 1.5Ah, and the manufacturer's article number 80001121. It also includes safety symbols for proper disposal, avoiding heat, and not disposing of with household waste. Manufacturer details (Grizzly Tools GmbH & Co. KG, Stockstädter Straße 20, D-63762 Großostheim) and the service website (www.grizzly-service.eu) are visible. The "Li-Ion" marking confirms the battery chemistry.
Key Features:
- Powerful 14.4V (1.5Ah) Li-Ion battery.
- Compatible with Parkside 4-in-1 combination unit PKGA 14.4 A1.
- Manufacturer's Article Number: 80001121.
4. Setup
Initial Charging:
- Before first use, fully charge the battery using a compatible Parkside charger.
- Connect the charger to a power outlet.
- Insert the PAP14.4 battery into the charger. Ensure it clicks securely into place.
- Observe the charger's indicator lights for charging status. Refer to your charger's manual for specific light patterns.
- Once fully charged, disconnect the battery from the charger.
5. Operating Instructions
Inserting the Battery:
- Ensure the power tool is switched off before inserting or removing the battery.
- Align the battery with the battery slot on your Parkside PKGA 14.4 A1 combination unit.
- Slide the battery into the slot until it locks into place with an audible click. Do not force the battery.
- Gently pull on the battery to ensure it is securely fastened.
Removing the Battery:
- Ensure the power tool is switched off.
- Locate the battery release button(s) on the tool.
- Press and hold the release button(s) while sliding the battery out of the tool.
6. Maintenance
Charging:
- Charge the battery when its performance begins to decrease. Avoid completely draining the battery to prolong its lifespan.
- Always use the original or approved Parkside charger.
- Do not overcharge the battery. Remove it from the charger once fully charged.
Storage:
- Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
- For long-term storage, charge the battery to approximately 50-70% capacity.
- Avoid storing the battery in a fully discharged state.
Cleaning:
- Clean the battery casing with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
- Keep the battery terminals clean and free of debris.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging. |
|
|
| Battery not powering tool. |
|
|
| Reduced run time. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model | PAP14.4 |
| Manufacturer's Article Number | 80001121 (also 110037-80001121) |
| Battery Type | Li-Ion |
| Voltage | 14.4 Volts |
| Capacity | 1.5 Ah |
| Weight | 340.19 Grams |
| Compatibility | Parkside 4-in-1 combination unit PKGA 14.4 A1 |
| Max Operating Temperature | 45°C (as indicated on battery) |
9. Warranty and Support
For warranty information, technical support, or spare parts, please contact the manufacturer directly. Refer to the product packaging or the manufacturer's website for the most current warranty terms and contact details.
- Manufacturer: Parkside (Grizzly Tools GmbH & Co. KG)
- Service Website: www.grizzly-service.eu
- Address: Grizzly Tools GmbH & Co. KG, Stockstädter Straße 20, D-63762 Großostheim, Germany
