Beats Studio3 Wireless Noise Cancelling Over-Ear Headphones User Manual

Introduction

This manual provides comprehensive instructions for the operation, maintenance, and troubleshooting of your Beats Studio3 Wireless Noise Cancelling Over-Ear Headphones. These headphones feature the Apple W1 chip for seamless connectivity with Apple devices, Class 1 Bluetooth for extended range, and Pure Adaptive Noise Cancelling (Pure ANC) technology for an immersive listening experience. They offer up to 22 hours of battery life with Pure ANC enabled and up to 40 hours with Pure ANC disabled.

What's in the Box

Verify that all items are present in your product packaging:

• Beats Studio3 Wireless Noise Cancelling Over-Ear Headphones
• Micro USB Charging Cable
• RemoteTalk 3.5mm Audio Cable
• Hard Shell Carrying Case
• Quick Start Guide (User Manual)
• Warranty Card

Image: The Beats Studio3 Wireless Headphones, charging cable, audio cable, and a hard shell carrying case with the Beats logo.

Setup

1. Charging Your Headphones

Before initial use, fully charge your Beats Studio3 headphones. Connect the supplied Micro USB charging cable to the charging port on the right ear cup and the other end to a USB power source.

• The Fuel Gauge LEDs on the right ear cup will indicate the battery level during charging.
• A full charge provides up to 22 hours of listening time with Pure ANC on, or 40 hours with Pure ANC off.
• Fast Fuel: A 10-minute charge provides 3 hours of playback when the battery is low.

Image: A detailed view of the right ear cup of the Beats Studio3 headphones, highlighting the power button and the five LED lights that indicate battery status.

2. Powering On/Off

Press and hold the power button on the right ear cup for 1 second to power on or off. The Fuel Gauge LEDs will illuminate when powered on.

3. Pairing with Devices

Your Beats Studio3 headphones utilize the Apple W1 chip for seamless pairing with Apple devices and Class 1 Bluetooth for other devices.

For Apple Devices (iOS 10 or later):

1. Ensure your iPhone is unlocked and Bluetooth is enabled.
2. Hold your Beats Studio3 headphones near your unlocked iPhone.
3. A setup animation will appear on your iPhone. Follow the on-screen instructions.
4. Once paired, your headphones will automatically connect to other Apple devices signed into your iCloud account.

For Other Bluetooth Devices (Android, PC, etc.):

1. Power on your headphones.
2. Press and hold the power button on the right ear cup for 5 seconds until the Fuel Gauge LEDs begin to flash, indicating pairing mode.
3. On your device, go to Bluetooth settings and select "Beats Studio3" from the list of available devices.
4. Once connected, the Fuel Gauge LEDs will glow solid white.

Operating Your Headphones

1. Pure Adaptive Noise Cancelling (Pure ANC)

Pure ANC actively blocks external noise for an immersive listening experience. It continuously calibrates audio in real-time to preserve sound clarity, range, and emotion.

• Pure ANC is automatically enabled when you power on your headphones.
• To turn Pure ANC off (and enter low power mode for extended battery life), double-press the power button. Double-press again to re-enable Pure ANC.

2. Audio Playback Controls

The 'b' button on the left ear cup serves as the multi-function control.

• Play/Pause: Press the 'b' button once.
• Skip Forward: Press the 'b' button twice.
• Skip Backward: Press the 'b' button three times.

3. Volume Controls

Volume buttons are located above and below the 'b' button on the left ear cup.

• Volume Up: Press the top volume button.
• Volume Down: Press the bottom volume button.

4. Phone Call Controls

Use the 'b' button on the left ear cup for call management.

• Answer/End Call: Press the 'b' button once.
• Answer Second Incoming Call/Switch Calls: Press the 'b' button once.
• Reject Incoming Call: Press and hold the 'b' button for 1 second.

Image: A side profile of the Beats Studio3 headphones, illustrating the location of the multi-function 'b' button and the volume control buttons on the left ear cup.

Maintenance

1. Cleaning

• Wipe the headphones with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents.
• Avoid getting moisture in any openings.

2. Storage

• When not in use, store the headphones in the provided hard shell carrying case to protect them from damage.
• Avoid exposing the headphones to extreme temperatures or direct sunlight for prolonged periods.

Image: The Beats Studio3 headphones shown in their folded position, ready to be placed into the carrying case for compact storage and protection.

Troubleshooting

Specifications

Warranty and Support

Your Beats Studio3 Wireless Noise Cancelling Over-Ear Headphones come with a limited warranty. Please refer to the warranty card included in your product packaging for detailed terms and conditions.

For further assistance, you can refer to the official user guide provided by the manufacturer:

Download Official User Guide (PDF)

For product support, visit the official Beats website or contact their customer service.