GROHE 40371A01

GROHE 40371A01 Essentials Double Towel Bar User Manual

Model: 40371A01

Introduction

Thank you for choosing the GROHE 40371A01 Essentials Double Towel Bar. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new towel bar. Please read these instructions carefully before beginning installation and retain them for future reference.

Safety Information

  • Always wear appropriate safety gear, such as eye protection, during installation.
  • Ensure the mounting surface is suitable and can support the weight of the towel bar and any towels placed on it.
  • Use only the provided mounting hardware or suitable alternatives for your specific wall type.
  • Keep small parts out of reach of children to prevent choking hazards.
  • Do not overtighten screws, as this may damage the product or mounting surface.

Package Contents

Verify that all components are present before beginning installation:

  • GROHE Essentials Double Towel Bar assembly
  • Mounting plate(s)
  • Screws and wall anchors
  • Hex key (if required for assembly)

If any parts are missing or damaged, please contact GROHE customer support.

Setup and Installation

The GROHE 40371A01 Essentials Double Towel Bar features hidden fasteners for a clean aesthetic and is designed for straightforward installation.

  1. Choose Location: Select a suitable location on your bathroom wall, ensuring it is level and at an appropriate height for use.
  2. Mark Drilling Points: Hold the mounting plate(s) against the wall at the desired location. Use a pencil to mark the drilling points through the screw holes. Ensure the marks are level.
  3. Drill Holes: Using an appropriate drill bit for your wall type (e.g., masonry bit for tile/concrete, wood bit for studs), drill holes at the marked points. The depth should be sufficient for the wall anchors.
  4. Insert Wall Anchors: If drilling into drywall or hollow walls, gently tap the wall anchors into the drilled holes until they are flush with the wall surface.
  5. Attach Mounting Plate(s): Position the mounting plate(s) over the holes and secure them to the wall using the provided screws. Tighten firmly but do not overtighten.
  6. Attach Towel Bar: Align the towel bar assembly with the secured mounting plate(s). Slide the towel bar onto the plate(s) and secure it using the small set screw(s) located on the underside of the towel bar base. Use the provided hex key to tighten these screws.
  7. Final Check: Gently pull on the towel bar to ensure it is securely fastened to the wall.
GROHE Essentials Double Towel Bar installed
Image: The GROHE Essentials Double Towel Bar in a Hard Graphite finish, showcasing its sleek design and double arm functionality. This image illustrates the product's appearance once installed.
Technical drawing with dimensions for GROHE 40371A01 Essentials Double Towel Bar
Image: Technical drawing illustrating the dimensions of the GROHE 40371A01 Essentials Double Towel Bar. The overall length is approximately 449 mm. The mounting base has a diameter of 54 mm, and the projection from the wall to the center of the bars is 61 mm.

Operating

The GROHE Essentials Double Towel Bar is designed for holding towels. Its two arms can swivel independently, allowing for flexible positioning and optimal drying. Simply place your towels over the bars as needed.

Maintenance

To maintain the finish and functionality of your GROHE towel bar, follow these cleaning guidelines:

  • Regular Cleaning: Clean the surface regularly with a soft cloth and mild soap or a non-abrasive bathroom cleaner.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, or cleaners containing ammonia, bleach, or alcohol, as these can damage the finish.
  • Drying: After cleaning, wipe the towel bar dry with a soft cloth to prevent water spots.

Troubleshooting

ProblemPossible CauseSolution
Towel bar feels looseMounting screws or set screws are not tight.Check and tighten all mounting screws and the small set screw(s) on the underside of the towel bar base using the hex key.
Scratches or damage to finishUse of abrasive cleaners or tools.Use only soft cloths and mild, non-abrasive cleaners for maintenance. Damage to finish is typically not repairable.
Towel bar does not swivel smoothlyAccumulation of dirt or debris in the swivel mechanism.Clean around the swivel points with a soft, damp cloth. Avoid applying lubricants unless specified by GROHE.

Specifications

  • Model Number: 40371A01
  • Brand: GROHE
  • Material: Metal
  • Finish Type: High Gloss (Hard Graphite)
  • Installation Type: Swiveling
  • Shape: Round
  • Product Dimensions: Approximately 18.9 x 3.23 x 2.36 inches (480 x 82 x 60 mm)
  • Item Weight: Approximately 1.23 pounds (0.56 Kilograms)

Warranty and Support

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official GROHE website. For technical support or replacement parts, please contact GROHE customer service directly. Contact details can typically be found on the GROHE website or in your product packaging.

Related Documents - 40371A01

Preview Grohe BauCosmopolitan Bathroom Towel Rail Installation Guide
Step-by-step instructions for installing the Grohe BauCosmopolitan Bathroom Towel Rail, including drilling, mounting, and final assembly.
Preview GROHE Essence Basin Mixer 1/2" S-Size - Brushed Nickel
Detailed product information for the GROHE Essence Basin Mixer 1/2" S-Size in brushed nickel, including features, specifications, and spare parts.
Preview GROHE Bathroom Accessories Installation Guide and Product Overview
Comprehensive installation instructions and product details for GROHE bathroom accessories. Includes steps for mounting, care tips, and model numbers for various items like soap dispensers, tumblers, and toilet brush holders.
Preview GROHE Start Single-Lever Basin Mixer 1/2" S-Size (32 559 002) - Technical Overview and Spare Parts
Comprehensive details and spare parts list for the GROHE Start Single-Lever Basin Mixer, 1/2" S-Size, model 32 559 002. Features include GROHE SilkMove, Long-Life finish, and GROHE Water Saving technology for efficient water use.
Preview GROHE Rainshower System 310 Thermostatic Shower System - Model 27968000
Detailed specifications for the GROHE Rainshower System 310, a wall-mounted thermostatic shower system featuring a 450mm swivable shower arm, Rainshower Cosmopolitan 310 head shower, Power&Soul Cosmopolitan 130 hand shower, and GROHE CoolTouch technology. Includes information on temperature control, spray patterns, and installation requirements.
Preview GROHE Clean System: Cleaning Guide for Faucets and Shower Heads
Learn how to effectively clean GROHE faucets and shower heads using the GROHE clean system and SpeedClean technology. This guide includes essential cleaning instructions and warnings against using abrasive or acidic cleaning agents.