Introduction
This instruction manual provides essential information for the proper setup, operation, and maintenance of your mDesign Steel Refillable Liquid Soap Dispenser Pump Bottles. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Image: Two mDesign Hyde Collection bronze soap dispensers, showcasing their design and finish.
Package Contents
- 2 x mDesign Steel Refillable Liquid Soap Dispenser Bottles
- 2 x Pump Mechanisms
Image: The product packaging indicating a two-pack of the bronze soap dispensers.
Setup Instructions
- Unpack: Carefully remove the soap dispensers and pump mechanisms from their packaging.
- Prepare for Filling: Unscrew the pump mechanism from the top of the dispenser bottle by turning it counter-clockwise.
- Fill the Bottle: Pour your desired liquid soap, dish soap, hand sanitizer, or essential oil blend into the bottle. Do not overfill; leave some space at the top to accommodate the pump mechanism.
- Reattach Pump: Carefully reinsert the pump mechanism into the bottle opening and screw it clockwise until securely tightened.
- Prime the Pump: Press the pump head several times until the liquid begins to dispense. This may require 5-10 presses for initial use.
Image: Illustrates the process of refilling the soap dispenser by pouring liquid into the open bottle.
Operating Instructions
To dispense liquid, place your hand under the nozzle and press down firmly on the pump head. The pump is designed for smooth and consistent dispensing.
Image: A user demonstrating how to operate the soap dispenser by pressing the pump.
Maintenance
- Cleaning the Exterior: Wipe the exterior of the dispenser with a soft, damp cloth and mild soap. Avoid abrasive cleaners or scouring pads, as these can damage the finish.
- Cleaning the Pump: If the pump becomes clogged or sticky, remove it from the bottle and rinse it thoroughly under warm water. You may need to pump warm water through the mechanism several times to clear any residue.
- Refilling: Refill the dispenser as needed following the "Setup Instructions" above.
- Storage: When not in use for extended periods, empty and clean the dispenser, then store it in a dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not dispensing liquid. | Bottle is empty or pump is not primed. | Refill the bottle and/or prime the pump by pressing it repeatedly until liquid appears. |
| Pump is stiff or sticky. | Residue buildup in the pump mechanism. | Remove the pump and rinse thoroughly with warm water. Pump warm water through the mechanism to clear blockages. |
| Liquid leaks from around the pump. | Pump not securely tightened or damaged seal. | Ensure the pump mechanism is screwed on tightly. If leaking persists, inspect the seal for damage. |
Specifications
- Brand: mDesign
- Model Number: 9429MDBA
- Material: Metal
- Color: Bronze
- Product Dimensions (each): 2.6" L x 2.6" W x 8.25" H (6.6 cm L x 6.6 cm W x 21 cm H)
- Liquid Volume: 8 Fluid Ounces (approx. 236 ml)
- Item Weight (each): 14.4 ounces (approx. 408 grams)
- Quantity: 2 Count
- UPC: 841247194295
Image: A visual representation of the dispenser's dimensions, indicating a base diameter of 3.5 inches (8.9 cm) and a total height of 8.25 inches (21 cm).
Warranty and Support
For warranty information or product support, please refer to the manufacturer's official website or contact their customer service directly. Keep your purchase receipt for any warranty claims.
Manufacturer Website: mDesign Official Store
