Introduction
Thank you for choosing the BEPER BC.040N Electric Moka Pot. This appliance is designed to provide you with delicious coffee quickly and conveniently. Please read this manual carefully before use to ensure proper operation, maintenance, and safety.

Figure 1: BEPER BC.040N Electric Moka Pot
This image shows the complete electric moka pot from the front, highlighting its black base, aluminum body, and transparent top carafe with a handle.
Setup and First Use
- Unpacking: Carefully remove all components from the packaging. Retain the packaging for future storage or transport.
- Initial Cleaning: Before first use, wash the transparent carafe, aluminum body, and filter thoroughly with warm water and mild detergent. Rinse well and dry completely. Do not immerse the electrical base in water.
- Assembly: Ensure all parts are correctly assembled before adding water and coffee. The transparent carafe should be securely screwed onto the aluminum base.

Figure 2: Side view of the Electric Moka Pot
This image displays the electric moka pot from a slight angle, showing the power switch on the base and the overall compact design.
Operating Instructions
Brewing Coffee (3 Cups)
- Fill with Water: Unscrew the transparent carafe from the aluminum base. Fill the lower aluminum chamber with cold water up to the safety valve level.
- Add Coffee: Insert the filter funnel into the lower chamber. Fill the filter with ground coffee, without pressing it down.
- Assemble: Screw the transparent carafe firmly back onto the aluminum base.
- Place on Base: Place the assembled moka pot onto its 360° swivel base. Ensure it is seated correctly.
- Power On: Plug the power cord into a suitable electrical outlet. Press the power button on the base to start brewing. The indicator light will illuminate.
- Automatic Shut-off and Keep Warm: The coffee maker will automatically turn off once the coffee is brewed. The keep-warm function will then activate, maintaining the coffee's temperature for up to 30 minutes.

Figure 3: 360° Swivel Base
This image highlights the 360-degree rotating base of the moka pot, showing the power switch and the circular contact point for the pot.
Brewing Coffee (1 Cup)
To brew a single cup of coffee, use the included 1-cup reducer. Place the reducer inside the filter funnel before adding coffee. Follow the same steps as for brewing 3 cups, adjusting the water and coffee quantities accordingly for a single serving.

Figure 4: 1-Cup Reducer
This image displays the metal reducer disk used to adjust the coffee capacity to a single cup, shown next to a small glass of espresso.

Figure 5: Enjoying a fresh cup of coffee
A woman is shown smiling and holding a coffee cup, with the BEPER electric moka pot visible on the kitchen counter, illustrating the enjoyment of the brewed coffee.
Maintenance and Cleaning
Regular cleaning ensures the longevity and optimal performance of your moka pot.
- Always unplug the appliance and allow it to cool completely before cleaning.
- Unscrew the transparent carafe from the aluminum base. Remove the filter funnel and the 1-cup reducer (if used).
- Wash the transparent carafe, filter funnel, and 1-cup reducer with warm, soapy water. Rinse thoroughly and dry immediately.
- Important: The aluminum body and electrical base are not dishwasher safe. Wipe the exterior of the aluminum body and the electrical base with a damp cloth. Do not use abrasive cleaners or scouring pads.
- Ensure all parts are completely dry before reassembling or storing the appliance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Coffee does not brew or brews slowly. |
|
|
| Coffee is not hot enough. |
|
|
| Water leaks from the unit. |
|
|
Technical Specifications
| Feature | Detail |
|---|---|
| Brand | BEPER |
| Model Number | BC.040N |
| Color | Black |
| Product Dimensions (L x W x H) | 19 x 12 x 23.5 cm |
| Weight | 750 grams |
| Capacity | 3 Cups (with 1-cup reducer option) |
| Power | 400 Watts |
| Voltage | 220V |
| Material | Aluminum |
| Special Feature | Keeps coffee warm for 30 minutes, Automatic shut-off |
| Filter Type | Reusable |
| Country of Origin | China |
Warranty and Support
For warranty information, technical support, or service inquiries, please contact BEPER customer service directly. Refer to the product packaging or the official BEPER website for contact details.
Please retain your proof of purchase for any warranty claims.





