1. Introduction
Thank you for choosing the BONTEC Universal Table Top TV Stand. This stand is designed to provide a stable and adjustable base for your television, offering an excellent alternative to wall mounting or original TV legs. It is compatible with a wide range of LCD/LED/OLED/Plasma TVs from 22 to 65 inches, supporting VESA mounting patterns between 50x50mm and 800x400mm, with a maximum load capacity of 50 kg (110 lbs). Please read this manual thoroughly before assembly and use to ensure proper installation and safe operation.
2. Safety Information
Always follow basic safety precautions when installing and using this product. Failure to do so may result in personal injury or property damage.
- Do not exceed the maximum weight capacity of 50 kg (110 lbs).
- Ensure the VESA mounting pattern of your TV is within the supported range (50x50mm to 800x400mm).
- Verify that the surface where the stand will be placed is stable, level, and capable of supporting the combined weight of the stand and your television.
- Assemble the stand exactly as instructed. Do not modify the product.
- Keep all parts, especially small components and hardware, out of reach of children.
- Periodically check all screws and connections to ensure they remain secure.
- If any parts are missing or damaged, do not attempt to assemble or use the product. Contact customer support for assistance.
3. Package Contents
Before beginning assembly, ensure all parts are present and undamaged. Refer to the parts list provided in your physical manual for detailed identification.
Image: Overview of the BONTEC Universal Table Top TV Stand, showing the two main support legs, vertical mounting arms, and included cable ties.
4. Setup and Assembly
Follow these steps carefully for proper assembly. It is recommended to have a second person assist with lifting and positioning the television.
4.1. Choose Installation Option
This TV stand offers two installation options based on your TV size and VESA pattern. The middle section of the vertical mounting arms is detachable for smaller TVs.
- For Larger TVs (Max VESA 800x400mm): Use the full length of the vertical mounting arms.
- For Smaller TVs (Max VESA 400x200mm): Detach the middle section of the vertical mounting arms. This is ideal for TVs around 22 inches.
Image: Illustration of the two assembly configurations: full height for larger TVs (up to 800x400mm VESA) and a shorter configuration for smaller TVs (up to 400x200mm VESA) by detaching a section.
Note: If your TV screen is less than 320mm in height, the TV mounting arms may protrude from behind the TV when using the full-length arms. For TVs with VESA 800x400mm, the distance from the lowest mounting hole of your TV to the bottom must be less than 260mm.
Image: Important considerations regarding VESA patterns and TV dimensions, illustrating how the mounting arms might extend above or below the TV if not properly matched to the TV's height and VESA hole placement.
4.2. Assemble the Base and Vertical Arms
Attach the vertical mounting arms to the base legs using the provided screws. Ensure all connections are tight and secure. The base includes anti-slip pads for stability and to protect your furniture surface.
Image: Detailed view of key features including the detachable arm section, points for easy installation, and the anti-slip pads on the base, emphasizing stability and user-friendliness.
4.3. Attach TV to Stand
Carefully align the VESA mounting holes on the back of your TV with the holes on the vertical arms of the stand. Use the appropriate screws and spacers from the included hardware kit. Ensure the TV is securely fastened to the stand. The stand is compatible with VESA sizes from 50x50mm up to 800x400mm.
Image: Visual guide to the stand's compatibility, indicating it fits 22"-65" TVs, supports a maximum weight of 50kg, and lists various VESA sizes from 50x50mm to 800x400mm.
4.4. Adjust Height
The stand features 3 levels of height adjustment. Each level can be adjusted by 3 cm to achieve your optimal viewing position. Adjust the height before placing the TV on its final surface.
Image: Visual representation of the three adjustable height settings for the TV stand, showing approximate heights of 620mm (Low), 650mm (Mid), and 680mm (High).
4.5. Cable Management
Use the included cable ties to manage and organize your TV cables, keeping your entertainment area neat and tidy.
5. Operating Instructions
Once assembled, the BONTEC TV stand provides a stable platform for your television. The design allows for extra space underneath the TV, which can be utilized for soundbars, media players, or other accessories.
Image: A television mounted on the BONTEC stand, showcasing the available space beneath the TV for placing media devices like soundbars or gaming consoles, contributing to a tidy setup.
To adjust the height after initial setup, carefully lift the TV off the stand (preferably with assistance), adjust the mounting arms to the desired height setting, and then re-secure the TV.
6. Maintenance
To ensure the longevity and continued safe operation of your TV stand:
- Cleaning: Wipe the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Periodic Checks: Regularly inspect all screws and connections to ensure they remain tight. Vibrations from speakers or movement can sometimes loosen fasteners over time.
- Weight Distribution: Ensure the TV is centered on the stand to maintain proper balance and stability.
7. Troubleshooting
If you encounter any issues with your BONTEC TV stand, refer to the following common solutions:
- TV is tilting forward: This can occur if the wrong screws or washers are used, or if they are not tightened sufficiently. Ensure you are using the correct length screws and appropriate washers for your TV's VESA holes. If tilting persists, try using slightly longer screws and larger washers for the bottom mounting points on the TV to provide more secure engagement.
- Stand feels unstable: Double-check that all assembly screws are fully tightened. Ensure the TV is centered on the stand and that the surface it rests on is flat and stable. The anti-slip pads should be making full contact with the surface.
- Mounting arms protrude above/below TV: Refer to Section 4.1 "Choose Installation Option" and the "Need Your Attention" diagram. For smaller TVs, ensure the detachable middle section of the vertical arms has been removed.
- Missing parts or damaged components: Do not proceed with assembly. Contact BONTEC customer support immediately for replacement parts.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | TV05 |
| TV Compatibility | 22 - 65 inch LCD/LED/OLED/Plasma TVs |
| VESA Compatibility | 50x50mm to 800x400mm |
| Maximum Load Capacity | 50 kg (110 lbs) |
| Height Adjustment | 3 levels (each adjustable by 3 cm) |
| Material | Alloy Steel |
| Colour | Black |
| Product Dimensions | 14 x 3.5 x 37.5 cm (base); 2.25 kg (weight) |
| Mounting Type | Tabletop Mount |
9. Warranty Information
Specific warranty details for this product are not provided in this manual. Please refer to the product packaging or the official BONTEC website for the most up-to-date warranty information.
10. Customer Support
For further assistance, technical support, or inquiries regarding replacement parts, please visit the official BONTEC website or contact their customer service department through the contact information provided on their website or product packaging. Always have your product model number (TV05) and purchase details ready when contacting support.
You can also visit the BONTEC store on Amazon: BONTEC Amazon Store
