EW Anti-Static Spray Can User Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of the EW Anti-Static Spray Can. This product is designed to eliminate static electricity from various surfaces, including rugs, drapes, paper, machinery, upholstery, and equipment. It is formulated to be colorless, non-oily, non-greasy, and long-lasting, helping to reduce dust attraction and prevent production slowdowns caused by static buildup.

2. Product Overview

Figure 2.1: EW Anti-Static Spray Can. A white and teal spray can labeled 'DIAMOND BRAND ANTISTATIC SPRAY' with bullet points 'REDUCES STATIC', 'LONG LASTING', 'COLORLESS', and the 'EW' logo prominently displayed.

The EW Anti-Static Spray is a 10 oz. aerosol can designed for industrial and household use. Its key features include:

• Reduces Static: Effectively neutralizes static electricity.
• Long Lasting: Provides extended protection against static buildup.
• Colorless: Will not stain or leave residue on most surfaces.
• Non-Oily & Non-Greasy: Ensures a clean application.
• Dust Attraction Reduction: Helps surfaces stay clean longer by repelling dust, dirt, and lint.

3. Safety Information

WARNING: EXTREMELY FLAMMABLE. CONTENTS UNDER PRESSURE.

• Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
• Do not spray on an open flame or other ignition source.
• Do not pierce or burn, even after use.
• Use only in a well-ventilated area.
• Avoid breathing spray mist.
• Do not get in eyes, on skin, or on clothing.
• Keep out of reach of children and pets.
• Store in a cool, dry place, away from direct sunlight.
• Refer to the product label for additional safety precautions and first aid instructions.

4. Setup

1. Prepare the Area: Ensure the area where the spray will be used is well-ventilated. Open windows or use exhaust fans if spraying indoors.
2. Prepare the Surface: Ensure the surface to be treated is clean and dry.
3. Shake Can: Shake the anti-static spray can vigorously for at least 30 seconds before each use to ensure proper mixing of contents.

5. Operating Instructions

Follow these steps for optimal application:

1. Hold Can Upright: Hold the can upright, approximately 8-10 inches (20-25 cm) from the surface to be treated.
2. Spray Evenly: Apply a light, even mist over the entire surface. Do not saturate the material.
3. Allow to Dry: Allow the treated surface to air dry completely. Drying time may vary depending on humidity and ventilation.
4. Reapplication: For persistent static issues or in very dry environments, reapplication may be necessary.

Recommended Surfaces:

• Rugs and Carpets
• Drapes and Curtains
• Upholstery (furniture, car seats)
• Paper and Documents
• Machinery and Equipment (non-electrical contact surfaces)

Note: Test on an inconspicuous area first to ensure compatibility and desired results, especially on delicate or sensitive materials.

6. Maintenance and Storage

• Storage: Store the can in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and incompatible materials.
• Temperature: Do not expose to temperatures exceeding 120°F (49°C).
• Disposal: Dispose of contents and container in accordance with local, regional, national, and international regulations. Do not puncture or incinerate.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Specific warranty information for the EW Anti-Static Spray Can is not provided in this manual. For details regarding product warranty or technical support, please refer to the product packaging or contact the manufacturer directly.

You may also visit the EW Store on Amazon for more information.