Cambridge Self-Adjusting Crimper/Stripper User Manual

1. Product Overview

The Cambridge Self-Adjusting Crimper/Stripper is an essential tool for electrical tasks, designed for both efficiency and ease of use. It features a self-adjusting mechanism for wire stripping and crimping, accommodating a range of wire gauges and terminal types.

This tool is ideal for making repairs and assembly projects more efficient for both home users and professionals.

Figure 1: Front view of the Cambridge Self-Adjusting Crimper/Stripper.

2. Safety Instructions

WARNING: Always follow basic safety precautions when using electrical tools to reduce the risk of injury.

• Always wear appropriate safety eye protection when using this tool to prevent eye injuries from flying debris.
• Always confirm and adhere to all local and national electrical codes when performing electrical work.
• The plastic handles are designed for comfort and grip; they are not intended to provide electrical insulation. Exercise caution when working with live circuits.
• Keep hands and fingers clear of the crimping and stripping jaws during operation.
• Store the tool in a dry, safe place, out of reach of children.

Figure 2: Back of product packaging showing safety warnings and description.

3. Product Features

• Self-adjusting mechanism for efficient crimping and stripping.
• Crimps non-insulated 22-10 AWG terminals.
• Crimps auto ignition 7-8mm terminals.
• Adjustable swivel knob for wire gauges between 10-24 AWG for precise stripping.
• Smooth operation for easy stripping and crimping.
• Durable steel construction for long-lasting performance.

4. Setup

The Cambridge Self-Adjusting Crimper/Stripper comes pre-assembled and ready for use. No complex setup is required.

1. Remove the tool from its packaging.
2. Inspect the tool for any visible damage before first use. Do not use if damaged.
3. Familiarize yourself with the tool's components, including the crimping jaws, stripping jaws, and the adjustable swivel knob.

Figure 3: Cambridge Self-Adjusting Crimper/Stripper in its retail packaging.

5. Operating Instructions

5.1. Wire Stripping

This tool features a self-adjusting mechanism for stripping wires, minimizing the need for manual gauge selection.

1. Open the handles of the tool.
2. Insert the wire into the stripping jaws. The tool will automatically adjust to the wire's diameter.
3. For fine-tuning or specific wire gauges (10-24 AWG), use the adjustable swivel knob located near the stripping jaws. Rotate the knob to set the desired stripping depth.
4. Squeeze the handles firmly and smoothly. The tool will cut and remove the insulation, leaving the conductor exposed.
5. Release the handles and remove the stripped wire.

5.2. Terminal Crimping

The tool is designed to crimp non-insulated terminals and auto ignition terminals.

1. Select the appropriate crimping slot for your terminal type. The tool supports non-insulated 22-10 AWG terminals and auto ignition 7-8mm terminals.
2. Insert the terminal into the correct crimping slot.
3. Insert the stripped wire into the terminal.
4. Squeeze the handles firmly until the crimping cycle is complete and the terminal is securely fastened to the wire.
5. Release the handles and remove the crimped terminal.

6. Maintenance

• Keep the tool clean and free from dirt, dust, and debris. Wipe down with a clean, dry cloth after each use.
• Periodically apply a light coat of machine oil to the pivot points and moving parts to ensure smooth operation and prevent rust.
• Inspect the jaws for wear or damage. If the jaws become dull or damaged, the tool's performance may be affected.
• Store the tool in a dry environment to prevent corrosion.

7. Troubleshooting

• Wire not stripping cleanly: Ensure the wire is fully inserted into the stripping jaws. Adjust the swivel knob if necessary for very fine or very thick wires within the specified range. Check for debris in the jaws.
• Terminal not crimping securely: Verify that you are using the correct crimping slot for the terminal size and type. Ensure the wire is properly inserted into the terminal before crimping. Apply firm, consistent pressure.
• Tool feels stiff or sticky: Clean the tool thoroughly and apply a small amount of lubricant to the pivot points.

8. Specifications

9. Warranty and Support

Specific warranty information for the Cambridge Self-Adjusting Crimper/Stripper is not provided in the product details. Please refer to the product packaging or contact Cambridge Resources directly for warranty details and customer support.

For further assistance or inquiries, please visit the official Cambridge Resources website or contact their customer service department.