Muse M-167 KDG Projection Alarm Clock Radio User Manual

1. Introduction

The Muse M-167 KDG is a versatile alarm clock radio designed for children's rooms, featuring FM/MW radio, dual alarms, and a unique projection function. This manual provides comprehensive instructions for setting up, operating, and maintaining your device to ensure optimal performance and longevity.

2. Safety Information

• Read all instructions carefully before use and retain for future reference.
• Do not expose the unit to rain or moisture to prevent fire or electric shock.
• Ensure the power adapter is compatible with your local power supply (230V ~ 50Hz).
• Keep the unit away from direct sunlight, heat sources, and strong magnetic fields.
• Do not attempt to disassemble or modify the unit. Refer all servicing to qualified personnel.
• Dispose of batteries responsibly according to local regulations.

3. Package Contents

Please check that all items are present:

• Muse M-167 KDG Projection Alarm Clock Radio
• AC Power Adapter
• User Manual (this document)

Note: 2 x 1.5V AAA batteries for backup are not included and must be purchased separately.

4. Product Overview

Familiarize yourself with the main components and controls of your alarm clock radio.

Figure 1: Front view of the Muse M-167 KDG Projection Alarm Clock Radio, showing the red LED display and control buttons on the top panel.

Top Panel Controls:

• PROJECTION Button: Activates/deactivates the projection feature.
• AUX Jack: 3.5mm input for connecting external audio devices.
• HR Button: Adjusts hour setting.
• MIN Button: Adjusts minute setting.
• SNOOZE/DIMMER Button: Activates snooze function during alarm; adjusts display brightness.
• Radio Control Buttons: For tuning, volume, and band selection (FM/MW).

Other Features:

• Projection Lens: Located on the top, allows for adjustable projection angle.
• LED Display: 0.9-inch red LED display for time and radio frequency.
• Speaker: Integrated speaker for audio output.

5. Setup

5.1 Power Connection

1. Insert the small plug of the AC power adapter into the DC IN jack located at the back of the unit.
2. Plug the AC power adapter into a standard 230V ~ 50Hz wall outlet.
3. The unit will power on, and the display will illuminate.

5.2 Backup Battery Installation

To retain time and alarm settings during a power outage, install backup batteries.

1. Open the battery compartment cover on the bottom of the unit.
2. Insert two (2) 1.5V AAA batteries (not supplied), observing the correct polarity (+/-) as indicated inside the compartment.
3. Close the battery compartment cover securely.

6. Operating Instructions

6.1 Setting the Time

1. In standby mode, press and hold the TIME SET button (if available, otherwise refer to HR/MIN buttons for direct setting).
2. Use the HR button to adjust the hour.
3. Use the MIN button to adjust the minutes.
4. Release the TIME SET button (or wait a few seconds) to confirm the time. The clock operates in 24-hour format.

6.2 Setting the Alarm

The unit features a dual alarm function.

1. Press and hold the ALARM 1 or ALARM 2 button.
2. Use the HR and MIN buttons to set the desired alarm time.
3. Press the ALARM 1/2 button again to select the alarm source: BUZZER or RADIO.
4. Release the button to confirm. An alarm indicator will appear on the display.

6.3 Radio Operation (FM/MW)

1. Press the POWER button to turn on the radio.
2. Press the BAND button to select between FM and MW bands.
3. Press the TUNE +/- buttons to manually tune to a station, or press and hold to auto-scan for the next available station.
4. Adjust the volume using the VOLUME +/- buttons.
5. To save a preset station, tune to the desired station, then press and hold a PRESET button until the display confirms.

6.4 Projection Function

The unit can project a starry sky pattern onto a wall or ceiling.

Figure 2: The Muse M-167 KDG projecting a starry sky pattern. The projection angle can be adjusted.

1. Press the PROJECTION button to turn the projection on or off.
2. Rotate the projection lens on top of the unit to adjust the angle and focus of the projected image.

Note: While some product descriptions may suggest time projection, this model primarily projects a starry sky pattern as depicted in product imagery and user feedback.

6.5 Auxiliary Input (AUX-in)

1. Connect an external audio device (e.g., MP3 player) to the AUX jack using a 3.5mm audio cable (not supplied).
2. The unit will automatically switch to AUX mode, or you may need to press the MODE button to select AUX.
3. Control playback and volume from your external device.

6.6 Snooze, Sleep, and Nap Functions

• Snooze: When the alarm sounds, press the SNOOZE/DIMMER button to temporarily silence the alarm for a few minutes. The alarm will sound again after the snooze period.
• Sleep: Set a timer for the radio to automatically turn off after a specified duration. (Refer to specific button for 'Sleep' if available, typically a dedicated button or combined with another).
• Nap: Set a short alarm for a nap without affecting the main alarm settings. (Refer to specific button for 'Nap' if available).

6.7 Display Dimmer

Press the SNOOZE/DIMMER button repeatedly in standby mode to cycle through different display brightness levels.

7. Maintenance

7.1 Cleaning

• Always unplug the unit from the power outlet before cleaning.
• Use a soft, dry cloth to wipe the exterior surfaces.
• Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
• Gently clean the projection lens with a soft, lint-free cloth if dust affects clarity.

7.2 Storage

If storing the unit for an extended period, disconnect it from the power supply and remove the backup batteries to prevent leakage.

8. Troubleshooting

If you encounter issues with your Muse M-167 KDG, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

Information regarding specific warranty terms and availability of spare parts for the Muse M-167 KDG is not provided in the product details. For warranty claims, technical support, or inquiries about spare parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related requests.