BEPER 40.500 Anti-Cellulite Massager User Manual

Introduction

The BEPER 40.500 Anti-Cellulite Massager is a professional lipomodeling system designed for body shaping, anti-cellulite treatment, firming, and improving circulation. It features a triple action of circular massage, pneumatic pressure, and infrared rays, along with four easily interchangeable massage heads. Its ergonomic handle allows for easy reach to all body parts, aiming for uniform results across the skin.

Important Safety Instructions

• Do not use the device for more than 15 minutes per session. Prolonged use beyond 15 minutes can lead to excessive heat generation, which may reduce the product's lifespan.
• Always begin at a moderate speed and gradually increase it based on your personal sensitivity and comfort.
• If using specific treatment creams (e.g., firming or anti-cellulite), apply them after the massage. This allows the skin and tissues to be optimally prepared to absorb the ingredients.
• Ensure the device is unplugged when not in use, during cleaning, or when changing accessories.
• Keep the device away from water and do not immerse it in any liquid.
• Do not use the device if the power cord or plug is damaged.
• This appliance is for household use only.

Product Overview and Components

The BEPER 40.500 massager comes with a main unit and four specialized interchangeable massage heads, each designed for a specific purpose.

Figure 1: The BEPER 40.500 massager main unit shown with its four distinct interchangeable massage heads laid out in front.

Main Unit Features:

• Ergonomic Handle: Designed for comfortable grip and easy maneuverability across all body areas.
• Adjustable Speed and Power Control: Allows customization of massage intensity.
• Infrared Function: Provides a thermoactive effect to enhance fat and toxin elimination.
• Power Cord: For continuous operation.

Interchangeable Massage Heads:

Figure 2: Close-up view of the four distinct massage heads: Body Modeling, Anti-Cellulite, Blood Circulation, and Body Contour.

1. Body Modeling Head (Spiked/Knobbed):
   

   Figure 3: This head is used for body shaping and smoothing the appearance of "orange peel skin."

2. Anti-Cellulite Head (Triple Roller):
   

   Figure 4: Designed to visibly reduce established cellulite through its rolling action.

3. Blood Circulation Head (Flat with 4 smooth knobs):
   

   Figure 5: Helps improve blood circulation and eliminate localized toxins.
4. Body Contour Head (Wavy/S-shaped):
   

   Figure 6: Used for firming and toning the skin, contributing to a smoother body contour.

Setup and Assembly

1. Unpacking: Carefully remove all components from the packaging. Retain the packaging for future storage or transport.
2. Inspect: Check the device and all accessories for any signs of damage. Do not use if damaged.
3. Attach Massage Head: Select the desired massage head for your treatment. Align the head with the main unit's attachment point and twist or push gently until it clicks securely into place. Ensure it is firmly attached before use.
4. Power Connection: Plug the power cord into a suitable electrical outlet (European 2-pin plug).

Operating Instructions

Follow these steps for effective and safe use of your BEPER 40.500 Anti-Cellulite Massager.

Figure 7: The massager in operation, demonstrating the infrared function during use on the thigh.

1. Preparation: Ensure the correct massage head is securely attached. For optimal results, you may apply a small amount of massage oil or gel to the skin area to be treated, though this is optional. Remember to apply specific treatment creams (firming, anti-cellulite) after the massage.
2. Power On: Plug the device into an electrical outlet. Locate the power button or switch on the unit and turn it on.
3. Adjust Intensity: Use the adjustable speed and power control dial (often marked 'min' to 'max') to set the desired massage intensity. Start with a moderate speed and gradually increase it to a level that feels comfortable and effective for you.
   

   Figure 8: The top of the massager unit, highlighting the adjustable speed control dial.
4. Application: Gently place the massage head onto the skin area you wish to treat. Move the massager in slow, circular motions. The ergonomic handle allows you to reach various parts of your body, including the abdomen, thighs, and buttocks.
   

   Figure 9: Demonstrating the use of the massager on the abdominal area.

5. Infrared Function: The device automatically utilizes infrared rays during operation, providing a warming effect that aids in the thermoactive process for fat and toxin elimination.
6. Session Duration: Limit each massage session to a maximum of 15 minutes to prevent overheating and ensure product longevity.
7. Power Off: After your session, turn off the device using the power button/switch and unplug it from the electrical outlet.

Maintenance and Care

• Cleaning: Always unplug the device before cleaning. Use a soft, damp cloth to wipe the main unit. The massage heads can be detached and cleaned with mild soap and water, then thoroughly rinsed and air-dried. Do not use abrasive cleaners or immerse the main unit in water.
• Storage: Store the massager and its accessories in a cool, dry place, away from direct sunlight and moisture. Keep it out of reach of children.
• Cord Care: Do not wrap the power cord tightly around the device, as this can damage the cord. Store it loosely coiled.

Troubleshooting

Specifications

Warranty and Support

The BEPER 40.500 Anti-Cellulite Massager comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions.

For warranty claims, technical support, or any inquiries regarding your product, please contact BEPER customer service through their official website or the retailer from whom you purchased the device. Please have your proof of purchase and the product model number (40.500) ready when contacting support.

Information regarding spare parts availability is currently unavailable.