Chicco 07079339220000
Chicco Next2me Chick to Chick Co-Sleeping Crib
Model: 07079339220000
Introduction
The Chicco Next2me Chick to Chick is a versatile co-sleeping crib designed to allow parents to sleep close to their baby safely and comfortably. It can be used as a side-sleeping crib or a standalone bassinet. This manual provides essential information for the correct assembly, use, maintenance, and troubleshooting of your Next2me crib.
Image: The Chicco Next2me Chick to Chick co-sleeping crib, featuring a beige fabric and mesh side for visibility and airflow. The adjustable legs and wheels are visible at the base.
Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- WARNING: Always ensure the crib is securely attached to the adult bed when used in co-sleeping mode.
- WARNING: Do not use the crib if any parts are broken, torn, or missing.
- WARNING: The product is suitable from birth up to 6 months or 9 kg (20 lbs), or until the baby can pull themselves into an upright position. Discontinue use if the child reaches these milestones.
- Ensure the crib is placed on a firm, horizontal level surface.
- Keep all small parts and packaging materials away from children.
- Regularly check all fasteners to ensure they are tight and secure.
Setup and Assembly
Follow these steps to assemble your Chicco Next2me crib:
- Unpack Components: Carefully remove all parts from the packaging. Verify all components are present according to the packing list.
- Assemble Frame: Connect the side frames to the base frame. Ensure all locking mechanisms click into place.
- Attach Fabric: Slide the fabric cover onto the assembled frame, ensuring it is taut and properly aligned.
- Install Mattress: Place the mattress inside the crib.
- Adjust Height: Use the height adjustment buttons on each leg to set the crib to the desired height. Ensure both sides are at the same height for standalone use, or adjust one side lower for incline.
- Attach to Adult Bed (Co-sleeping mode):
- Lower one side of the crib by unzipping and folding down the mesh panel.
- Position the crib next to the adult bed.
- Secure the crib to the adult bed using the provided straps. Pass the straps under the adult mattress and fasten them securely. Refer to the strap diagram in the included paper manual for detailed instructions.
- Ensure there is no gap between the crib mattress and the adult mattress.
Operating Instructions
Using as a Co-Sleeping Crib
Once securely attached to the adult bed, the Next2me allows you to have your baby close for nighttime feedings and comfort. The lowered side provides easy access to your baby.
Image: The Chicco Next2me crib in co-sleeping mode, demonstrating its proximity to an adult bed. A baby is sleeping soundly in the crib, and a parent is sleeping in the adjacent bed, highlighting the convenience of side-sleeping.
Using as a Standalone Bassinet
To use as a standalone bassinet, ensure both sides of the crib are raised and locked into position. The mesh side can be zipped up for full enclosure. The wheels allow for easy movement between rooms.
Adjusting Height and Incline
- Height Adjustment: Press the buttons on each leg simultaneously to raise or lower the crib. Ensure both sides are adjusted to the same level for standalone use.
- Incline Function: For babies with reflux or congestion, the crib can be inclined by setting one side slightly higher than the other. Do not exceed a 2-level difference between the two sides.
Maintenance and Care
- Cleaning Fabric: The fabric parts can be hand washed only. Do not machine wash, bleach, tumble dry, or dry clean. Refer to the care label on the fabric for specific instructions.
- Cleaning Frame: Wipe the metal and plastic parts with a damp cloth and mild soap. Dry thoroughly.
- Storage: When not in use, the crib can be disassembled and stored in the included travel bag. Store in a dry place away from direct sunlight.
- Regular Checks: Periodically inspect the crib for any signs of wear, damage, or loose fasteners.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Crib feels unstable. | Legs not fully extended or locked; not on a level surface. | Ensure legs are fully extended and locked. Place on a firm, level surface. |
| Difficulty adjusting height. | Buttons not pressed simultaneously or mechanism is stiff. | Press both height adjustment buttons firmly and simultaneously. If stiff, ensure no fabric is obstructing the mechanism. |
| Crib not securely attached to adult bed. | Straps not tightened sufficiently or incorrectly routed. | Re-route and tighten the attachment straps according to the manual. Ensure no gap exists between crib and adult mattress. |
Specifications
- Model Number: 07079339220000
- Brand: Chicco
- Color: Beige
- Material Type: Fabric
- Product Dimensions: 25.98"L x 36.61"W x 27.17"H
- Item Weight: 19.8 pounds (9 Kilograms)
- Minimum Weight Recommendation: 3 Pounds
- Suitable Age: From birth to 6 months or 9 kg (20 lbs)
- Furniture Finish: Pine (referring to internal frame components)
- Product Care Instructions: Hand Wash Only (fabric)
- Additional Features: Compatible with all beds, adjustable height, inclinable base, includes travel bag.
Warranty and Support
Chicco products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Chicco website.
For technical support, replacement parts, or further assistance, please contact Chicco Customer Service. Contact details can typically be found on the Chicco website or on the product packaging.
Online Resources: www.chicco.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.