1. Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your TORCHSTAR 6 Inch Slim LED Recessed Lighting with Junction Box. This ultra-thin LED downlight is designed for efficient and versatile illumination in various indoor settings.
Image Description: A cross-section view of the recessed light showing its ultra-thin profile (minimum height above ceiling 2 inches) and features like IC rating, airtight foam gasket, aluminum material, and working temperature range (-4°F to 113°F).
Key features include:
- Efficient Lighting: Uses 12W to provide 1100lm brightness, 100-130V.
- Ultra-Thin Design: Requires only 2 inches of clearance, suitable for ceilings with limited space.
- Trusted Quality: ETL certified, corrosion and rust-resistant aluminum material, IC rated for contact with insulation.
- CRI90 & Dimmable: Dimmable from 5% to 100% with high CRI90 for accurate color rendering.
- Easy to Install: Includes a junction box for direct ceiling installation without a separate housing can.
2. Important Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can lead to electric shock or fire.
- Read all instructions carefully before beginning installation.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Ensure the supply voltage is compatible with the fixture (100-130V).
- Do not modify the fixture or its components.
- Do not install in areas exposed to direct water spray or submersion. This product is rated for damp locations only.
- Wear safety glasses and gloves during installation.
- Keep children away from the work area.
3. Package Contents
Verify that all components are present before beginning installation:
- 6 x TORCHSTAR 6 Inch Slim LED Recessed Lights
- 6 x Junction Boxes
- Wire connectors (quantity may vary)
- Mounting screws (quantity may vary)
Note: Additional items such as cable connectors (required by code for metal boxes) and a 6 3/8 inch hole saw are not included and may be necessary for installation.
4. Product Specifications
| Specification | Detail |
|---|---|
| Brand | TORCHSTAR |
| Model Number | JXLDL6D-6P12W40 |
| Size | 6 Inch |
| Color Temperature | 4000K Cool White |
| Brightness | 1100 Lumens |
| Wattage | 12 Watts |
| Voltage | 100-130 Volts |
| Dimmable | Yes (5%-100%) |
| CRI | 90+ |
| Material | Aluminum |
| Lifespan | 50,000 hours |
| Certifications | ETL, Energy Star, FCC |
| IC Rated | Yes (suitable for contact with insulation) |
| Location Rating | Damp Location |
| Clearance Required | 2 inches |
| Item Dimensions (L x W x H) | 7.01"L x 7.01"W x 0.46"H |
| Cut-out Hole Size | 6.10 inches (155mm) - Note: Some users recommend 6 3/8 inches for easier fit. |
Image Description: A detailed diagram illustrating the product dimensions, including the light panel's diameter (7.01 inches), thickness (0.46 inches), and the junction box's dimensions (4.77 x 2.72 x 1.38 inches). The recommended cut-out hole size is indicated as 6.10 inches (155mm).
5. Installation Instructions
Before you begin, ensure power is turned off at the circuit breaker. This product is designed for easy installation, but if you are unsure, consult a qualified electrician.
Step 1: Prepare the Ceiling
Determine the desired location for your recessed light. Use a hole saw to cut a circular opening in the ceiling. The recommended cut-out hole size is 6.10 inches (155mm). Some users have found a 6 3/8 inch hole saw provides a slightly easier fit.
Image Description: A person wearing yellow gloves is using a utility knife to cut a circular hole in a white ceiling, guided by a template labeled "TEMPLATE".
Step 2: Wire the Junction Box
Open the junction box. Connect the household electrical wires to the corresponding wires inside the junction box (black to black, white to white, ground to ground) using the provided wire connectors. Ensure all connections are secure. Close the junction box cover.
Important: Ensure proper cable connectors are used where wires enter the metal junction box, as required by electrical codes. These are typically not included.
Image Description: A person wearing yellow gloves is connecting electrical wires inside a gray junction box. Orange wire connectors are visible.
Step 3: Connect the LED Panel to the Driver
Locate the cable extending from the LED light panel and the corresponding connector from the junction box. Plug the LED panel cable into the connector from the junction box. Ensure a firm connection.
Image Description: A person wearing yellow gloves is connecting the white cable from the LED light panel to the cable extending from the junction box.
Step 4: Insert the Light into the Ceiling
Gently push the junction box up into the ceiling opening. Then, fold the spring clips on the sides of the LED light panel upwards and insert the light into the hole. The spring clips will secure the light flush against the ceiling.
Image Description: A close-up view of a white, round LED recessed light installed flush with a white ceiling, emitting light downwards.
Installation Video
Video Description: An official product video from Torchstar demonstrating the installation process of the ultra-thin LED recessed lighting. The video shows the steps from preparing the ceiling to securing the light in place.
6. Operating Instructions
Once installed, restore power to the circuit. The TORCHSTAR 6 Inch Slim LED Recessed Light will illuminate. This fixture is dimmable, allowing you to adjust the light output from 5% to 100% using a compatible LED dimmer switch (sold separately).
Image Description: A modern living room with multiple recessed lights installed in the ceiling. Icons indicate CRI90, a dimming range of 5%-100%, and suitability for damp locations.
Dimmable Functionality
For optimal dimming performance, use an LED-compatible dimmer switch. Refer to the dimmer switch manufacturer's instructions for installation and compatibility. The lights provide true and vivid colors across their dimming range due to their high CRI90 rating.
Video Description: A short preview video from Torchstar demonstrating the dimming capability of the recessed lights, showing the light output changing from bright to dim.
7. Maintenance
The TORCHSTAR 6 Inch Slim LED Recessed Lighting is designed for long-lasting performance with minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the light fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or electrical components.
- Bulb Replacement: This LED fixture has an integrated LED light source with a lifespan of approximately 50,000 hours and does not require bulb replacement. If the light stops functioning, refer to the troubleshooting section or contact customer support.
8. Troubleshooting
If you experience issues with your TORCHSTAR LED Recessed Lighting, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply, loose wiring, faulty switch, or damaged fixture. | Check circuit breaker. Ensure all wire connections are secure. Test the switch. If the issue persists, contact a qualified electrician or customer support. |
| Light flickers or dims inconsistently. | Incompatible dimmer switch, loose wiring, or voltage fluctuations. | Ensure you are using an LED-compatible dimmer. Check wire connections. Consult an electrician if voltage issues are suspected. |
| Light is not as bright as expected. | Dimmer setting is too low, or incorrect light placement. | Adjust the dimmer to maximum brightness. Ensure adequate spacing between lights for desired illumination levels. |
| Buzzing noise from the light. | Incompatible dimmer switch. | Replace the dimmer with an LED-compatible model. |
9. Warranty and Customer Support
This TORCHSTAR product comes with a 3-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover:
- Damage caused by improper installation or misuse.
- Damage caused by unauthorized repairs or modifications.
- Damage due to natural disasters or accidents.
For warranty claims, technical assistance, or any questions regarding your product, please contact TORCHSTAR customer support. You can find more information and contact details on the official TORCHSTAR Brand Store.
