Introduction
This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your SportDOG Brand Contain + Train Add-A-Dog Collar. This collar receiver is designed to work with compatible SportDOG Brand systems to assist in dog training and containment.
Product Overview
The SportDOG Brand Contain + Train Add-A-Dog Collar (SDF-CTR) is a versatile collar receiver compatible with several SportDOG Brand systems. It offers multiple operational modes and features designed for effective dog training and containment.
Key Features
- Compatible with SportDOG Brand Contain + Train (SDF-CT), In-Ground Fence (SDF-100A), and FieldTrainer 425X (SD-425X).
- Three operational modes: works with fence boundary, handheld remote, or both.
- Rechargeable Lithium-Ion batteries with 2-hour quick charge and 1 to 2-month battery life.
- Waterproof and submersible up to 10 ft. with DryTek technology.
- Supports an unlimited number of dogs with additional SDF-CTR collars.
- Offers tone (beep), vibration (buzz), and seven levels of static stimulation.
- Suitable for dogs 10 lbs. and up.
Image: SportDOG Add-A-Dog Collar highlighting key features.
Setup and Installation
Collar Compatibility
This Add-A-Dog Collar is designed to integrate with existing SportDOG Brand systems. Ensure your current system is one of the following for proper functionality:
- SportDOG Brand Contain + Train (SDF-CT)
- SportDOG Brand In-Ground Fence (SDF-100A)
- SportDOG Brand FieldTrainer 425X (SD-425X)
Image: Man fitting a SportDOG collar on a dog, illustrating compatibility.
Fitting the Collar Receiver
Proper fit of the collar receiver is crucial for consistent and effective operation. An improperly fitted collar may lead to inconsistent stimulation or skin irritation.
- The collar should fit snugly around your dog's neck, ensuring the contact points (probes) maintain consistent contact with the skin without rubbing.
- You should be able to fit only one finger comfortably between the collar strap and your dog's neck.
- Recheck the collar fit after several minutes of wear to ensure it remains secure and comfortable.
Image: Diagram showing proper collar fitting technique.
Operating Instructions
Operational Modes
The collar features three distinct operational modes, allowing you to select how it responds to your SportDOG system:
- Remote Trainer Mode: The collar responds only to signals from the Remote Transmitter. Use the dial to select one of 7 static stimulation levels (low, medium, or high ranges) and buttons for momentary (nick) or continuous stimulation. Vibration (buzz) and tone (beep) options are also available.
- Containment Mode: The collar responds only to the In-Ground Fence Transmitter. As your dog approaches the boundary, it will receive a warning tone and vibration, followed by one of 7 static stimulation levels, adjustable based on your dog's temperament.
- Combined Mode: The collar responds to both the Remote Transmitter and the In-Ground Fence Transmitter.
Tone, Vibrate, and Static Stimulation
The collar provides progressive feedback to your dog:
- Tone (Beep): An audible warning signal.
- Vibration (Buzz): A tactile warning signal.
- Static Stimulation: Seven levels of static correction are available, which you can select to match your dog's sensitivity and training needs.
Image: SportDOG Add-A-Dog Collar highlighting tone, vibrate, and static stimulation.
Maintenance
Charging the Collar
The collar receiver is equipped with rechargeable Lithium-Ion batteries. A full charge typically takes 2 hours and provides 1 to 2 months of battery life, depending on usage.
Waterproof Design
The collar features DryTek technology, making it waterproof and submersible up to 10 feet. This ensures reliable performance in various weather conditions and environments.
Cleaning
Regularly inspect and clean the collar and contact points to ensure proper function and your dog's comfort. Use a damp cloth to wipe away dirt and debris.
Troubleshooting
If you encounter issues with your SportDOG Brand Contain + Train Add-A-Dog Collar, consider the following:
- No Response from Collar:
- Ensure the collar is fully charged.
- Verify the collar is correctly paired with your system (Remote Transmitter or Fence Transmitter).
- Check that the collar is set to the appropriate operational mode.
- Confirm the contact points are making proper skin contact.
- Inconsistent Stimulation:
- Re-evaluate collar fit; it may be too loose.
- Ensure contact points are clean and free of debris.
- Check for any damage to the collar or contact points.
- Short Battery Life:
- Ensure the collar is charging correctly.
- Battery life can vary based on usage frequency and environmental factors.
- If issues persist, contact customer support.
For further assistance, please refer to the detailed operating guide included with your original system or contact SportDOG Customer Care.
Specifications
| Feature | Detail |
|---|---|
| Model Name | SDF-CTR |
| Item Weight | 0.01 Ounces |
| Product Dimensions | 6"L x 3.06"W |
| Batteries | 1 Lithium Ion battery (included) |
| Waterproof Rating | Submersible to 10 ft (DryTek technology) |
| Compatibility | SportDOG Contain + Train (SDF-CT), In-Ground Fence (SDF-100A), FieldTrainer 425X (SD-425X) |
| Dog Size | 10 lbs. and up |
| Color | Orange |
| Manufacturer | Radio Systems Corporation |
Warranty and Support
Warranty Information
The SportDOG Brand Contain + Train Add-A-Dog Collar comes with a 2-Year Manufacturer's Warranty. Please retain your proof of purchase for warranty claims.
Customer Care
For any questions, technical support, or warranty assistance, please contact our US-based Customer Care Center.
Phone: 844-209-4636
Website: www.sportdog.com
