WELLAND 48-Inch White Floating Shelf with Touch-Sensing LED Light Instruction Manual

1. Important Safety Information

Please read all instructions carefully before assembly and use. Retain this manual for future reference.

• Weight Limit: The maximum weight capacity for this shelf is 10 pounds. Do not exceed this limit to prevent damage or injury.
• Mounting: Ensure the shelf is securely mounted to a wall stud or using appropriate drywall anchors for stability. Improper installation can lead to the shelf falling.
• Battery Safety: Use only the specified battery type (3 x AA batteries per light, not included). Do not mix old and new batteries. Remove batteries if the product is not used for an extended period.
• Placement: Avoid placing the shelf in areas with excessive moisture or direct heat sources.

2. Package Contents

Verify that all components are present before beginning assembly:

• Shelf x1
• LED Lights x2
• Accessory Bag (mounting hardware)
• Assembly Instruction (this manual)

Image: Overview of the WELLAND Floating Shelf and its included components.

3. Specifications

Image: Detailed dimensions of the 48-inch floating shelf.

4. Setup and Installation

Follow these steps for proper installation of your floating shelf.

4.1. Prepare for Installation

• Tools Needed: You will need a drill, a level, a pencil or marker, and a screwdriver for installation.
• Location: Choose a suitable wall location. Consider mounting into wall studs for maximum stability. If mounting into drywall, use appropriate anchors (included in the accessory bag).

4.2. Mount the Shelf

• Marking: Hold the mounting bracket against the wall at the desired height and use a level to ensure it is straight. Mark the screw hole positions with a pencil.
• Drilling: Drill pilot holes at the marked positions. If mounting into drywall without a stud, insert the appropriate wall anchors.
• Secure Bracket: Attach the mounting bracket to the wall using the provided screws. Ensure it is firmly secured.
• Attach Shelf: Slide the floating shelf onto the secured mounting bracket. The streamlined design hides the support for a clean, floating appearance.

4.3. Install LED Lights

• Open Light Unit: Twist the back cover of each LED light counter-clockwise to open it.
• Insert Batteries: Insert 3 AA batteries into each LED light unit, ensuring correct polarity.
• Secure Lights: Place the LED light units into the designated recesses on the underside of the shelf. Twist clockwise to secure them.

Image: Step-by-step guide for battery insertion and light installation.

5. Operating Instructions (LED Light)

The WELLAND Floating Shelf features touch-activated LED lights for convenient illumination.

• Turning On/Off: To activate the LED light, gently touch the center of the light unit. To turn it off, touch the center again.
• Light Output: The LED lights provide a gentle glow, ideal for accent lighting or reading.

6. Maintenance

• Cleaning: Wipe the shelf surface with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Battery Replacement: If the LED lights dim or stop working, replace the 3 AA batteries in each unit. Follow the installation steps in Section 4.3 to access and replace batteries.
• Inspection: Periodically check the mounting hardware to ensure the shelf remains securely attached to the wall.

7. Troubleshooting

8. Warranty and Support

For any questions, concerns, or support regarding your WELLAND Floating Shelf, please contact the manufacturer directly. Specific warranty details may vary and are typically provided with your purchase documentation.

You can visit the official WELLAND store for more information and contact options: WELLAND Store