VisionTechShop 8541791561

VisionTechShop S Body Digital Bathroom Scale User Manual

Model: 8541791561

1. Introduction

This manual provides essential information for the safe and effective use of your VisionTechShop S Body Digital Bathroom Scale. Please read these instructions thoroughly before operating the device and retain them for future reference.

The VisionTechShop S Body Digital Bathroom Scale is designed for accurate body weight measurement. It features a super-clear, large LED display and automatic step-on technology for ease of use. The scale is built with tempered glass for durability and rounded corners for safety.

2. What's Included

  • VisionTechShop S Body Digital Bathroom Scale
  • 4 x AAA batteries (1.5V each)
  • Instruction Manual

3. Important Safety Information

  • Always place the scale on a hard, flat surface. Using it on soft surfaces like carpet may affect accuracy.
  • Ensure your feet are dry before stepping on the scale to prevent slipping.
  • The scale is not waterproof. Avoid exposure to water or excessive moisture.
  • Do not jump on the scale or subject it to sudden impacts.
  • Keep the scale out of reach of children when not in use.
  • Do not attempt to disassemble or repair the scale yourself. Contact customer support for assistance.

4. Setup

4.1 Battery Installation

Before first use, open the battery compartment on the underside of the scale and insert the included 4 AAA batteries, ensuring correct polarity. Remove any insulating strips if present.

4.2 Initial Placement

Place the scale on a firm, flat, and level surface. Avoid placing it on carpets, rugs, or uneven flooring, as this can lead to inaccurate readings.

Two images illustrating the automatic on and off feature of the VisionTechShop S Body Digital Bathroom Scale.

The scale automatically turns on when you step on it and turns off when you step down, conserving battery life.

5. Operating Instructions

5.1 Taking a Measurement

  1. Gently step onto the center of the scale with bare, dry feet.
  2. Stand still until your weight is displayed and stabilized on the LED screen.
  3. The scale will automatically turn off after a few seconds of inactivity.
VisionTechShop S Body Digital Bathroom Scale in pink, showing a clear LED display.

The VisionTechShop S Body Digital Bathroom Scale features a sleek pink design with a large, easy-to-read LED display.

Image of feet on the VisionTechShop S Body Digital Bathroom Scale, illustrating its wide platform.

The scale's wide platform (11.96 inches) accommodates adult users comfortably, ensuring stable measurements.

Close-up of the large, super-clear LED display on the VisionTechShop S Body Digital Bathroom Scale.

The scale features a super-clear, large LED display (3.15" x 1.22" numbers) for easy readability from a distance.

Image showing the bright LED display of the VisionTechShop S Body Digital Bathroom Scale in a dark room.

The bright LED display ensures clear and easy readings even in dimly lit environments.

5.2 Changing Weight Units (lb/kg)

To switch between pounds (lb) and kilograms (kg):

  1. Turn the scale over to access the underside.
  2. Locate the unit conversion button (often a small circular button or switch) near the battery compartment.
  3. Press or slide the button to select your desired unit.
  4. Flip the scale back over. The display will show the new unit when activated.

This video demonstrates how to change the weight unit (pounds to kilograms or vice versa) on the VisionTechShop S Body Digital Bathroom Scale.

An introductory video showcasing the features and design of the VisionTechShop S Body Digital Bathroom Scale.

6. Maintenance

  • Clean the scale with a soft, damp cloth. Do not use abrasive cleaners or immerse the scale in water.
  • Store the scale in a cool, dry place away from direct sunlight and extreme temperatures.
  • If the scale will not be used for an extended period, remove the batteries to prevent leakage.

7. Troubleshooting

ProblemSolution
Inaccurate readingsEnsure the scale is on a hard, flat, and level surface. Recalibrate by stepping on and off the scale once before taking a measurement.
"Lo" displayedLow battery. Replace all 4 AAA batteries.
"Err" displayedOverload. The weight exceeds the maximum capacity (396 lb / 180 kg).
No displayCheck battery installation and ensure batteries are not depleted.

8. Specifications

FeatureDetail
BrandVisionTechShop
Model Number8541791561
Weight Limit396 lb / 180 kg
Display TypeLED
Product Dimensions11.96 x 11.96 x 0.86 inches
Power Source4 x AAA batteries
Special FeatureBodyweight, Smart (Step-On Technology)

9. Warranty and Support

VisionTechShop provides technical support for its products. For any questions, issues, or warranty claims, please contact VisionTechShop customer service. Refer to the product packaging or the official VisionTechShop website for the most current contact information.

Related Documents - 8541791561

Preview GL-6000L Scale Calibration Instructions - VisionTechShop
Step-by-step guide for calibrating the VisionTechShop GL-6000L portable bench scale. Includes instructions for various weight capacities.
Preview VisionTech DSW-100 Digital Scale Owner's Manual
This manual provides detailed information on the VisionTech DSW-100 digital scale, including product specifications, basic operations, settings, and troubleshooting.
Preview VTS-CS4 LCD High Resolution Digital Crane Scale Calibration Manual
Detailed calibration manual for the VTS-CS4 LCD High Resolution Digital Crane Scale, covering scale capacity settings and calibration procedures using both panel buttons and a remote controller.
Preview VLP-100B Firmware Update Instructions
Step-by-step guide on how to update the firmware for the VLP-100B label printing scale using a USB stick.
Preview S41SBU / S41PBU Cash Drawer Quick Start Guide
A quick start guide for the S41SBU and S41PBU cash drawers, detailing cable installation, coin partition adjustment, disassembly, and lock functions.