Freeman PE2118G 18 Volt Cordless 2-in-1 18-Gauge 2" Brad Nailer / Narrow Crown Stapler Kit

Product Overview

The Freeman PE2118G is a versatile 18 Volt Cordless 2-in-1 18-Gauge 2" Nailer / Stapler Kit designed for a wide range of applications. Powered by a high-capacity rechargeable 18 volt 2.0 Ah lithium-ion battery, this tool offers cordless mobility, eliminating the need for an air compressor. Its 2-in-1 multi-purpose magazine supports both nailing and stapling, making it suitable for tasks such as decorative trim, moulding, cabinetry, paneling, upholstery, and various hobbies and crafts. The kit includes two 18V 2Ah lithium-ion batteries, a rapid charger, a blow-molded case, a belt hook, adjustment tools, and fasteners.

Image: The Freeman PE2118G 2-in-1 Brad Nailer/Stapler kit, showing the tool, two 18V lithium-ion batteries, a rapid charger, a hard carrying case, and included fasteners (brad nails and narrow crown staples).

Setup

1. Charging and Installing the Battery

1. Charge the Battery: Fully charge the 18V 2.0 Ah lithium-ion battery using the provided rapid charger. The charger's LED indicator will show the charging status. A full charge typically takes 45 minutes.
2. Install the Battery: Align the battery with the battery port on the tool's handle and slide it in until it clicks securely into place. Ensure it is firmly seated before operation.

2. Loading Fasteners

The PE2118G features a 2-in-1 multi-purpose magazine that accepts both 18 gauge brad nails and 18 gauge 1/4" narrow crown staples. Ensure the tool is disconnected from the battery before loading fasteners.

• Brad Nails: Load 18 gauge brad nails (from 3/4" to 2" in length) into the bottom channel of the magazine.
• Narrow Crown Staples: Load 18 gauge 1/4" narrow crown staples (from 3/4" to 1-5/8" in length) into the top channel of the magazine.
• Push the fastener strip fully into the magazine and then push the follower forward until it locks into place, securing the fasteners.

Image: A close-up view of the tool's magazine, illustrating how both brad nails (silver) and narrow crown staples (gold) are loaded into their respective channels.

Operating Instructions

1. Selecting Firing Mode

The tool features a select fire switch to choose between two firing modes:

• Single Sequential Firing: For precise fastener placement. The trigger must be released and pressed for each fastener.
• Bump Firing: For rapid fastening. Hold the trigger down and bump the contact trip against the workpiece to drive fasteners.

Image: A detailed view of the tool's side panel, highlighting the firing mode selection switch and the LED indicator lights for various tool statuses.

2. Adjusting Depth

The tool features a tool-free depth adjustment wheel. Simply turn the wheel by hand to change the driving depth of nails and staples, allowing for flush driving or countersinking based on the material and application.

Image: A close-up of the tool's nose, showing the tool-free depth adjustment knob and the no-mar tip.

3. General Operation

• Ensure the battery is charged and fasteners are loaded correctly.
• Select the desired firing mode (single sequential or bump fire).
• Adjust the depth of drive as needed for your material.
• Place the tool's nose firmly against the workpiece. The No Mar Safety Contact prevents damage to the work surface.
• Press the trigger to drive a fastener.
• The integrated LED work light illuminates the work area for improved visibility.

Image: A user demonstrating the use of the Freeman PE2118G nailer, pressing it against a wooden surface to drive a fastener.

Maintenance

• Clearing Jams: The easy access nose allows for quick clearing of jammed fasteners. Always disconnect the battery before attempting to clear a jam.
• General Cleaning: Keep the tool clean and free of debris. Wipe down the exterior with a damp cloth. Do not use harsh chemicals.
• Storage: Store the tool in its blow-molded case in a dry, secure location when not in use.

Troubleshooting

The LED indicator light on the tool provides important status warnings:

• LED Red Flashing: Indicates a fastener jam. Refer to the "Clearing Jams" section in Maintenance.
• LED Red: Indicates low battery. Recharge the battery.
• LED Green Flashing: Indicates overheating. Allow the tool to cool down before resuming operation.
• LED Green: Indicates an empty magazine (no nails/staples). Reload fasteners.

Image: A detailed view of the tool's side panel, showing the LED indicator lights and their corresponding meanings for troubleshooting.

Specifications

Warranty and Support

The Freeman PE2118G 18 Volt Cordless 2-in-1 18-Gauge 2" Nailer / Stapler Kit is covered by Freeman's Professional 1 Year Limited Warranty. For detailed warranty information, service, or support, please refer to the official user manual or contact Freeman customer service.

An official User Manual (PDF) is available for download: Download User Manual