1. Product Overview
The Human Touch Reflex SOL Foot & Calf Massager is designed to provide targeted relief and rejuvenation for your feet and calves. It incorporates patented CirQulation Figure-Eight Technology, deeply-penetrating vibrating foot massage, and warm air technology to enhance circulation, relieve tension, and soothe muscles. This massager is engineered for durability and user comfort, featuring an adjustable tilt base and removable, washable sleeve inserts for hygiene.
Key Features:
- CirQulation Figure-Eight Technology: Promotes blood flow from feet towards the core for improved circulation and natural healing.
- Deep Kneading Shiatsu Massage: Targets pressure points for comprehensive foot and calf relief.
- Vibrating Foot Massage: Provides additional relaxation and pain relief.
- Warm Air Technology: Delivers soothing warmth to alleviate tension and soreness.
- Adjustable Tilt Base: Allows for customization of the massage angle for optimal comfort.
- Removable & Washable Sleeve Inserts: Ensures a hygienic massage experience.
- Two Intensity Settings: Offers customizable massage strength.
Figure 1: The Human Touch Reflex SOL Foot & Calf Massager, showcasing its compact design and foot/calf wells.
2. Safety Information
Please read and understand all safety instructions before operating the Human Touch Reflex SOL Foot & Calf Massager to prevent injury or damage to the unit.
- Do Not Sit or Stand: Never sit or stand on the massager. This can result in personal injury and/or permanent damage to the massager.
- Recommended Use Time: The massager is designed for automatic 15-minute intervals. Do not exceed this recommended duration without a break.
- Power Source: Ensure the massager is connected to a compatible AC110-120V 60 Hz power source.
- Disconnection: Always disconnect the massager from the power source when not in use or before cleaning.
- Medical Conditions: Consult a healthcare professional before use if you have any medical conditions, including but not limited to circulatory issues, diabetes, or if you are pregnant.
- Foot Size: The massager accommodates most foot sizes up to men's size 12. Ensure a comfortable fit to avoid discomfort.
- Wear Socks: It is recommended to wear socks during use to prevent direct skin contact with internal components and enhance comfort.
3. Setup Guide
Follow these steps to set up your Human Touch Reflex SOL Foot & Calf Massager:
- Unpack: Carefully remove the massager from its packaging and place it on a stable, flat surface.
- Power Connection: Locate the power cord and plug it into a standard electrical outlet (AC110-120V 60 Hz).
- Adjust Tilt Base (Optional): The massager features an adjustable tilt base for customized positioning. Gently pull out the wire stand located at the bottom front of the unit to recline the massager slightly for a different angle. Ensure the stand is securely locked in place.
- Inspect Inserts: Verify that the removable sleeve inserts are properly installed in the foot chambers.
Figure 2: The massager positioned for use in a home environment, demonstrating its readiness for operation.
4. Operating Instructions
Operating your Reflex SOL massager is straightforward. The control panel is conveniently located for easy access.
- Positioning: Sit comfortably in a chair and place your feet and calves into the massager's foot wells. Ensure your ankles are positioned all the way to the back for optimal massage coverage.
- Power On: Press the Power (Home icon) button on the control panel to turn on the unit. The power indicator light will illuminate.
- Select Massage Mode: Use the Massage (circular arrow) dial to select your desired massage program. You can choose between manual high speed, manual low speed, or three auto sequences (1, 2, 3) which vary in massage patterns and pauses.
- Adjust Intensity: Use the Intensity (up/down arrow) buttons to adjust the strength of the massage. There are low and high intensity settings.
- Activate Vibration (Optional): Press the Vibration (wave icon) button to turn the vibrating foot massage on or off. This feature primarily affects the bottom of your feet.
- Activate Warm Air (Optional): Press the Warm Air (thermometer icon) button to activate the soothing warm air function. You may hear a fan sound as it blows warm air to the rear of your ankles.
- Enjoy Massage: The massager will operate for an automatic 15-minute interval.
- Power Off: To stop the massage at any time, press the Stop (red circle) button. To restart, simply re-select your preferred massage settings.
Figure 3: Close-up of the intuitive control panel, allowing easy selection of massage modes, intensity, vibration, and warm air.
Figure 4: Illustration of reflexology massage, a key benefit of the massager's design.
5. Maintenance
Proper maintenance ensures the longevity and hygienic operation of your massager.
- Cleaning the Sleeve Inserts: The fabric sleeve inserts are removable and washable. Simply unzip them from the foot chambers and follow the care instructions on the label for cleaning. This helps maintain a clean and healthy environment for users.
- Exterior Cleaning: Wipe the exterior of the massager with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.
- Storage: Store the massager in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Figure 5: The removable sleeve inserts can be easily unzipped and washed for hygiene.
6. Troubleshooting
This section provides solutions to common issues you might encounter with your massager.
- Massager Not Turning On:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check if the power button on the control panel has been pressed.
- Weak or Insufficient Massage:
- Verify that the intensity setting is adjusted to your preference (high intensity).
- Ensure your feet and calves are positioned correctly and fully inserted into the foot wells.
- Consider wearing thicker socks if you have smaller calves to ensure better contact with the massage mechanisms.
- No Warm Air:
- Confirm that the Warm Air button has been activated.
- Allow a few minutes for the warm air to become noticeable.
- Unusual Noises:
- A slight fan noise is normal when the warm air function is active.
- If unusual or loud noises persist, discontinue use and contact customer support.
For issues not covered here, please refer to the full user manual (link provided in the Support section) or contact Human Touch customer support.
7. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 200-SOL-001 |
| Product Dimensions | 19 x 18 x 18 inches |
| Item Weight | 25 Pounds |
| Material | Polyurethane |
| Power Source | Corded Electric |
| Voltage | AC110-120V 60 Hz |
| Manufacturer | Human Touch |
| First Available Date | August 23, 2017 |
Figure 6: Dimensional diagram of the Human Touch Reflex SOL massager.
8. Warranty and Support
Human Touch stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your product or visit the official Human Touch website.
Customer Support:
For technical assistance, troubleshooting, or warranty claims, please contact Human Touch customer support:
- Manufacturer: Human Touch
- Online Resources: Visit the Human Touch Store on Amazon for additional product information and support.
- Full User Manual: A detailed PDF user manual is available for download here.
