GE Lighting 043168787963

GE Lighting Halogen Light Bulb User Manual

Model: 043168787963 (78796)

Product Overview

The GE Lighting 43-Watt Clear A19 Halogen Light Bulb is designed for general purpose indoor lighting. This energy-efficient bulb provides 750 lumens of comfortable, inviting light while using only 43 watts, equivalent to a standard 60-watt incandescent bulb. It features an A19 shape with a medium E26 base, making it suitable for various fixtures such as table lamps and enclosed lighting.

Halogen lamps offer a crisp, white light source with excellent color rendering. Unlike traditional incandescent lamps, they utilize a halogen gas that allows for longer bulb life without compromising light output. These bulbs are fully dimmable and provide instant brightness, contributing to energy savings by using approximately 28% less energy than a regular incandescent bulb.

GE A19 Halogen Light Bulb
Image: A single GE A19 Clear Halogen Light Bulb, showcasing its clear glass and internal halogen capsule. This bulb is designed for general purpose lighting.

Setup and Installation

Before installing the bulb, ensure the power to the fixture is turned off at the circuit breaker to prevent electrical shock. Allow any existing bulb to cool completely before removal.

  1. Power Off: Turn off the light switch and the main power supply to the fixture at the circuit breaker.
  2. Remove Old Bulb: Carefully unscrew the old light bulb from the socket by turning it counter-clockwise.
  3. Install New Bulb: Hold the new GE Halogen A19 bulb by its glass portion (avoid touching the metal base with bare hands if possible, as oils can affect bulb life). Align the E26 medium base with the socket and gently screw the bulb in clockwise until it is snug. Do not overtighten.
  4. Restore Power: Turn the main power supply back on at the circuit breaker, then turn on the light switch to test the new bulb.

Important Safety Note: Halogen bulbs operate at high temperatures. Ensure the fixture is rated for the bulb's wattage (43W) and provides adequate ventilation. Do not use in enclosed fixtures unless specifically rated for halogen bulbs.

Operating Instructions

The GE Halogen A19 bulb functions like a standard incandescent bulb. It provides instant full brightness upon activation and is fully dimmable, allowing you to adjust light levels with compatible dimmer switches.

  • On/Off: Use your standard light switch to turn the bulb on or off.
  • Dimming: If connected to a compatible dimmer switch, rotate or slide the dimmer control to adjust the light intensity. Ensure your dimmer switch is designed for incandescent/halogen loads.
  • Brightness: This bulb provides 750 lumens of light output, offering a comfortable and inviting illumination suitable for various indoor settings.

Maintenance

GE Halogen A19 bulbs are designed for long-lasting performance with minimal maintenance. The average life of these bulbs is approximately 1000 hours, based on 3 hours per day usage.

  • Cleaning: If the bulb requires cleaning, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners.
  • Handling: When replacing or handling the bulb, avoid touching the glass with bare hands. Fingerprints can create hot spots that reduce bulb life. If touched, clean with rubbing alcohol and a lint-free cloth.
  • Replacement: Replace the bulb when it burns out. Follow the installation steps outlined in the "Setup and Installation" section.

Troubleshooting

If your GE Halogen A19 light bulb is not functioning as expected, consider the following common issues and solutions:

ProblemPossible CauseSolution
Bulb does not light up.
  • No power to the fixture.
  • Bulb not screwed in properly.
  • Bulb is burnt out.
  • Faulty light fixture or switch.
  • Check circuit breaker and light switch.
  • Ensure bulb is securely tightened in the socket.
  • Replace the bulb with a new one.
  • Test the fixture with a known working bulb or consult an electrician.
Bulb flickers or dims inconsistently.
  • Loose connection.
  • Incompatible dimmer switch.
  • Voltage fluctuations.
  • Ensure bulb is tightly screwed in.
  • Verify dimmer switch is compatible with incandescent/halogen bulbs.
  • Consult an electrician if voltage issues persist.
Bulb burns out quickly.
  • Over-voltage.
  • Frequent switching on/off.
  • Touching glass with bare hands during installation.
  • Excessive vibration.
  • Ensure fixture voltage matches bulb (120V).
  • Reduce frequency of switching if possible.
  • Handle bulb with a cloth or gloves.
  • Ensure fixture is stable and not subject to excessive movement.

Specifications

  • Brand: GE Lighting
  • Model Number: 043168787963 (Part Number: 78796)
  • Light Type: Halogen
  • Wattage: 43 Watts
  • Incandescent Equivalent: 60 Watts
  • Brightness: 750 Lumens
  • Color Temperature: 2900 Kelvin
  • Bulb Shape Size: A19
  • Bulb Base: E26 Medium
  • Voltage: 120 Volts (100 to 120 Volts and 60 Hertz)
  • Average Life: 1000 Hours (approx. 0.9 years based on 3 hours/day usage)
  • Color: Clear
  • Material: Glass
  • Indoor/Outdoor Usage: Indoor
  • Color Rendering Index (CRI): 80
  • Product Dimensions: 5.75 x 5 x 5 inches (packaging dimensions)
  • Item Weight: 8.1 ounces (packaging weight)

Warranty and Support

For product questions regarding GE Lighting products, please call the GE Hotline at 1-800-435-4448. Support is available Monday – Friday, 8:00 a.m. - 6:00 p.m. EST. Follow the recording prompts or stay on the line to speak directly to a customer service representative.

For detailed warranty information, please refer to the official GE Lighting website or the documentation included with your purchase. The warranty description provided is the model number: 043168787963. It is recommended to retain your proof of purchase for warranty claims.

© 2024 GE Lighting. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.