INEVIFIT Body-Analyzer Scale (Model I-BA002) Instruction Manual

Introduction

The INEVIFIT Body-Analyzer Scale is a highly accurate digital bathroom scale designed to help you monitor your body composition. It measures various health metrics to provide a comprehensive overview of your fitness progress.

Key metrics measured include:

• Weight
• Body Fat Percentage
• Body Water Percentage
• Muscle Mass Percentage
• Bone Mass Percentage
• Body Mass Index (BMI)
• Visceral Fat Levels
• Basal Metabolic Rate (BMR)
• Metabolic Age

The scale features a 12.8" x 12.8" premium platform, a large 4.1" LCD display for easy reading, and supports up to 10 unique user profiles with automatic recognition. It is equipped with advanced sensors for precise results and can weigh up to 400 lbs (180 kgs).

Image: INEVIFIT Body-Analyzer Scale displaying weight, body fat, muscle, bone, and body water percentages.

Setup

1. Battery Installation

The scale requires 4 AAA batteries (included). To install:

1. Locate the battery compartment on the underside of the scale.
2. Open the battery compartment cover.
3. Insert the 4 AAA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

Image: INEVIFIT Body-Analyzer Scale in its packaging, highlighting that batteries are included.

2. User Profile Setup

The scale supports up to 10 user profiles (P1-P10). To set up a profile:

1. Firmly double-tap the "SET" button. The user profile number (e.g., "P1") will begin blinking.
2. Use the Up and Down arrows to select your desired profile number (P1-P10).
3. Press "SET" to confirm the profile number.
4. The gender icon will blink. Use the Up and Down arrows to select Male, Female, Athletic Male, or Athletic Female. (Note: Athletic setting requires 10 or more hours of rigorous physical activity per week).
5. Press "SET" to confirm gender.
6. The age will blink. Use the Up and Down arrows to enter your age.
7. Press "SET" to confirm age.
8. The height will blink. Use the Up and Down arrows to enter your height.
9. Press "SET" to confirm height.
10. Your user profile is now saved.

To set up additional users, repeat the process using a different profile number.

Operating Instructions

1. Scale Placement and Auto-Calibration

For accurate readings, place the scale on a hard, flat, and level surface. Avoid carpets or uneven flooring.

To auto-calibrate the sensors:

1. Firmly step on and off the scale.
2. The display should show "0.0" (or "0.00" depending on unit) indicating it is ready for measurement.

Image: A foot on the INEVIFIT Body-Analyzer Scale, illustrating the platform size and dimensions.

2. Taking a Measurement

To obtain a body composition analysis:

1. Ensure your feet are bare and have good contact with the metal electrodes on the scale's surface.
2. Step onto the scale. It will automatically recognize your profile if previously set up.
3. Stand still until your weight and body composition metrics are displayed. The scale will cycle through the various measurements.

If only weight is displayed, ensure your feet are bare and making proper contact with the electrodes for body composition analysis.

3. Changing Unit of Measurement

To switch between pounds (LB) and kilograms (KG):

1. Tap the "SET" button to power on the scale.
2. Double-tap the Down arrow button to toggle between LB and KG.
3. The selected unit will be displayed.

Maintenance

To ensure the longevity and accuracy of your INEVIFIT Body-Analyzer Scale, follow these maintenance guidelines:

• Cleaning: Wipe the scale's surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the scale in water.
• Storage: Store the scale in a cool, dry place. Avoid extreme temperatures and direct sunlight.
• Battery Replacement: Replace batteries when the low battery indicator appears on the display. Always replace all 4 AAA batteries at the same time.
• Avoid Impact: Do not drop the scale or subject it to heavy impact, as this may damage the sensors.

Troubleshooting

If you encounter issues with your scale, try the following steps:

• No Display/Low Battery: Check if batteries are correctly installed. Replace all 4 AAA batteries if the display is dim or not showing.
• Inaccurate Readings:
  • Ensure the scale is placed on a hard, flat, and level surface.
  • Perform auto-calibration by stepping on and off the scale until "0.0" is displayed.
  • For body composition analysis, ensure bare feet are making good contact with all four metal electrodes.
  • Verify that the correct user profile (gender, age, height) is selected.
• Error Messages: Refer to the full instruction manual for specific error code meanings. Often, re-calibrating or replacing batteries can resolve common errors.
• Clearing Memory: To erase all user profile information, tap the "SET" button to power on the scale, then press and hold both the Up and Down arrow buttons firmly until "CLR" is displayed on the screen.

Specifications

Warranty & Support

The INEVIFIT Body-Analyzer Scale comes with an industry-leading 5-year manufacturer's warranty.

For any questions, technical support, or warranty claims, please contact INEVIFIT customer service. They offer 7-day real USA customer support to ensure your satisfaction.

Additional protection plans are available for purchase:

• 2-Year Protection Plan
• 3-Year Protection Plan
• Complete Protect Plan (monthly billing)

Please refer to your warranty card or the INEVIFIT website for detailed terms and conditions.