INEVIFIT Body-Analyzer Scale (Model I-BA002W) Instruction Manual

1. Setup

1.1 Battery Installation

The INEVIFIT Body-Analyzer Scale requires 4 AAA batteries for operation, which are included with your purchase. To install the batteries:

1. Locate the battery compartment on the underside of the scale.
2. Open the battery compartment cover.
3. Insert the 4 AAA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

1.2 Initial Calibration & Scale Placement

For accurate readings, the scale must be placed on a hard, flat, and level surface. Avoid soft surfaces like carpets or rugs. Perform an initial calibration:

1. Firmly step on and off the scale. The display should show '0.0' or '0.00'.
2. This process calibrates the scale to its environment.

1.3 User Profile Setup

The scale supports up to 10 unique user profiles. Setting up a profile allows the scale to store your personal data and provide accurate body composition readings. To set up your profile:

1. With the scale off, firmly double-tap the 'SET' button until the user profile number (P1, P2, etc.) begins blinking.
2. Use the 'UP' or 'DOWN' arrow buttons to select your desired profile number (P1-P10).
3. Press 'SET' to confirm.
4. Select your gender (male/female) using the arrow buttons and confirm with 'SET'.
5. Enter your age using the arrow buttons and confirm with 'SET'.
6. Enter your height using the arrow buttons and confirm with 'SET'.
7. The scale will save your profile. Repeat for additional users.

Note: An 'Athletic Setting' is available for individuals performing 10 or more hours of rigorous physical activity per week. This setting can be selected during gender input.

1.4 Changing Unit of Measurement

To switch between pounds (LB) and kilograms (KG):

1. Tap the 'SET' button to power on the scale.
2. Double-tap the 'DOWN' arrow button to toggle between LB and KG.

2. Operating Instructions

2.1 Taking a Measurement

The INEVIFIT Body-Analyzer Scale features Auto-On & Auto-Off sensing technology for convenience and battery saving. To take a measurement:

1. Ensure the scale is on a hard, flat, level surface.
2. Step onto the scale with bare feet, ensuring good contact with the four metal electrode sensors.
3. Stand still until your weight is displayed.
4. The scale will then cycle through and display your body composition metrics.

2.2 Interpreting Body Composition Metrics

The scale measures and displays the following key metrics:

• Weight: Your total body weight.
• Body Fat %: Percentage of body fat.
• Body Water %: Percentage of body water.
• Muscle Mass %: Percentage of muscle mass.
• Bone Mass: Estimated bone mass.
• BMI (Body Mass Index): A measure of body fat based on height and weight.
• Visceral Fat: Fat stored around the organs in the abdomen.
• BMR (Basal Metabolic Rate): The number of calories required to keep your body functioning at rest.
• Metabolic Age: An estimation of your body's biological age based on your BMR.

Image: The INEVIFIT Body-Analyzer Scale display showing various body composition metrics including weight, body fat, body water, muscle, bone mass, BMI, visceral fat, BMR, and metabolic age.

3. Maintenance

3.1 Cleaning

To clean your INEVIFIT Body-Analyzer Scale:

• Wipe the scale surface with a soft, damp cloth.
• Do not use abrasive cleaners or immerse the scale in water.

3.2 Battery Replacement

When the battery indicator appears on the display, replace all 4 AAA batteries with new ones. Ensure correct polarity during installation.

3.3 Clearing User Memory

To erase all stored user profile information from the scale:

1. Tap the 'SET' button to power on the scale.
2. Press and hold both the 'UP' and 'DOWN' arrow buttons simultaneously until 'CLR' is displayed on the screen.
3. This action will clear all user data.

4. Troubleshooting

If you encounter issues with your INEVIFIT Body-Analyzer Scale, consider the following:

• No Display/Low Battery: Check if batteries are installed correctly. Replace with new AAA batteries if the display is dim or non-responsive.
• Inaccurate Readings: Ensure the scale is on a hard, flat, and level surface. Recalibrate by stepping on and off the scale until '0.0' is displayed. Ensure bare feet make good contact with the electrodes for body composition analysis.
• Error Messages: Refer to the full instruction manual for specific error code interpretations. Generally, re-calibrating or replacing batteries can resolve many issues.

5. Specifications

Image: The INEVIFIT Body-Analyzer Scale showing its dimensions: 12.8 inches (width), 12.8 inches (length), and 1.1 inches (height).

6. Warranty & Support

6.1 Manufacturer's Warranty

The INEVIFIT Body-Analyzer Scale comes with an industry-leading 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

6.2 Customer Support

INEVIFIT provides 7-day real USA customer support. For any questions, assistance, or warranty claims, please contact INEVIFIT customer service. Refer to the product packaging or the official INEVIFIT website for contact details.