DOMENS DMS-1580T BV Money Counter Machine User Manual

Introduction

The DOMENS DMS-1580T BV Money Counter Machine is designed for efficient and accurate counting of US dollar bills, featuring advanced counterfeit detection capabilities. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device to ensure optimal performance and longevity.

Package Contents

Upon opening the package, please verify that all components are present:

• 1 x DOMENS DMS-1580T BV Money Counter Machine
• 1 x US Standard Power Cord
• 1 x Cleaning Brush
• 1 x Fuse
• 1 x Rubber Ring
• 1 x User Manual (this document)

Figure 1: Money Counter Machine and Accessories. The image displays the money counter alongside its power cable, a cleaning brush, a spare fuse, a rubber ring, and the operation manual, illustrating the complete package contents.

Setup

1. Placement: Place the money counter on a stable, flat surface away from direct sunlight, heat sources, or excessive dust.
2. Power Connection: Connect the US standard power cord to the machine's power input port located at the rear. Plug the other end into a compatible power outlet (85V-250V).
3. Power On: Locate the power switch, typically on the side or rear of the machine, and turn it to the 'ON' position. The LCD display should illuminate.
4. Bill Loading:
   • Ensure bills are neat and flat before loading.
   • Place the wad of bills into the hopper in an orderly manner, ensuring they are properly aligned.
   • Push the bills backward into the feeder mechanism as indicated by the machine's design.
   

   Figure 2: Correct Bill Loading Procedure. This image illustrates the proper steps for loading bills into the machine, emphasizing the importance of neatness and correct alignment to prevent errors.

Operating Instructions

The DMS-1580T BV offers various modes to suit your counting needs:

Figure 3: Control Panel and Modes. The image highlights the machine's LCD display and control buttons, detailing the available operation modes such as Value Counting, Auto/Manual, Add, Batch, Counting, and Detection modes.

• Counting Mode: This is the default mode for counting the quantity of bills without detection. All paper currencies are compatible in this mode.
• Detection Mode (UV/MG/MT/IR/DD):

  The machine is equipped with multiple precise detection technologies to identify counterfeit bills:

  • UV (Ultraviolet) Detection: Checks for UV features on bills.
  • MG (Magnetic) Detection: Detects magnetic ink.
  • MT (Metal Thread) Detection: Verifies the presence of a metallic security thread.
  • IR (Infrared) Detection: Analyzes infrared patterns and bill thickness.
  • DD (Dimensional Detection): Checks for correct bill size.
  • Also includes Half-note & Chain-note, and Slope-note detection.

  If a suspicious bill is detected, the LCD display will turn red and an audible alarm will sound.

  

  Figure 4: Multi-Counterfeit Detection. This graphic details the various detection methods employed by the machine, including UV, MG, MT, IR, and DD, to ensure the authenticity of bills.

• Value Counting Mode (US Dollar Only - Not Mix Value):

  This mode counts the number of bills and calculates the total monetary value of a selected single denomination. This function is specifically for US dollars. The machine does not automatically recognize the denomination of the bill; you must separate bills of various denominations before adding each stack.

  When used in conjunction with Add Mode, you can sum up the total value of different denominations by processing them in separate batches.

  

  Figure 5: Denomination Value Counting. The image shows the LCD screen displaying the denomination of bills and the total counted value, illustrating the machine's value counting capability for single denominations.

• Add Mode: Allows the machine to continuously add the count of multiple batches.
• Batch Mode: Set a specific batch value. The machine will automatically stop after counting the predetermined number of bills, facilitating separation into specific quantities.
• Auto/Manual Mode: Select between automatic start upon bill insertion or manual start via a button press.
• Reset Mode: Clears the current count and resets the machine for a new operation.

Maintenance

Regular maintenance ensures the longevity and accuracy of your money counter:

• Cleaning: Use the provided cleaning brush to regularly remove dust and debris from the bill path, sensors, and rubber wheels. Covered sensors help prevent dust accumulation, but periodic cleaning is still recommended.
• Rubber Wheel Inspection: Periodically check the 13 high-quality rubber wheels for wear and tear. A spare rubber ring is included for replacement if needed.
• General Care: Keep the machine in a clean, dry environment. Avoid spilling liquids on the device.

Troubleshooting

Specifications

• Model: DMS-1580T BV
• Brand: DOMENS
• Item Weight: 7.34 pounds
• Product Dimensions: 12.3 x 5.6 x 9.25 inches
• Counting Speed: 1100 bills per minute
• Detection Methods: UV (Ultraviolet), MG (Magnetic), MT (Metal Thread), IR (Infrared), DD (Dimensional Detection), Half-note, Chain-note, Slope-note
• Voltage Range: DC 85V-250V (suitable for 110V or 220V areas)
• Material Type: Acrylonitrile Butadiene Styrene
• Color: Black

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or visit the official DOMENS website. Keep your purchase receipt as proof of purchase for warranty claims.