1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Lock'er Down Console Safe, model LD2045. Designed to secure personal items within your vehicle's console, this safe offers robust protection and convenient access. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
2. Product Overview
The Lock'er Down Console Safe is constructed from solid domestic 12-gauge cold-rolled steel, featuring a durable black powder coat finish and a spring-assisted door hinge. It is equipped with a 4-digit combination lock for secure access.
Key Features:
- Robust 12-gauge cold-rolled steel construction.
- Secure 4-digit combination lock.
- Durable black powder coat finish.
- Spring-assisted door hinge for easy access.
- Designed for seamless integration into vehicle console.
Image 2.1: The Lock'er Down Console Safe LD2045, showcasing its robust design and integrated combination lock.
3. Compatibility
This console safe is compatible with the following Ford vehicle models equipped with a full floor console:
- 2015-2020 Ford F150 (including Raptor models)
- 2017-2023 Ford Super Duty
- 2018-2022 Ford Expedition
4. Setup and Installation
The Lock'er Down Console Safe is designed for easy installation. While specific steps may vary slightly by vehicle model, the general process involves securing the safe within the existing console structure.
Required Tools:
- 1/2 inch open-end wrench
- Phillips head screwdriver (or drill/driver with Phillips bit)
General Installation Steps:
- Clear the contents of your vehicle's center console.
- Position the Lock'er Down safe into the console opening, ensuring proper alignment.
- Secure the safe using the provided hardware. Typically, this involves fastening bolts from the safe to the console's existing mounting points. Ensure all fasteners are tightened securely but do not overtighten.
- Verify that the safe is firmly in place and does not shift.
- Test the combination lock and door mechanism to ensure smooth operation.
Image 4.1: The console safe installed within a vehicle's center console, demonstrating its integrated fit.
5. Operating the Combination Lock
Your Lock'er Down Console Safe is equipped with a 4-digit combination lock for secure access to your valuables.
Setting Your Combination:
Refer to the specific instructions provided with your lock mechanism for initial combination setting. Typically, this involves setting the lock to a default code (e.g., 0-0-0-0), then using a reset tool or button to enter your desired personal code.
Opening the Safe:
- Rotate the dials to align your 4-digit combination with the indicator marks.
- Once the correct combination is entered, the lock mechanism will disengage.
- Lift the safe door using the spring-assisted hinge.
Closing and Locking the Safe:
- Lower the safe door until it is fully closed.
- Scramble the combination dials to secure the lock.
Image 5.1: A close-up view of the 4-digit combination lock, showing the numbered dials.
6. Maintenance
To ensure the continued performance and appearance of your Lock'er Down Console Safe, follow these simple maintenance guidelines:
- Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the powder coat finish.
- Lock Mechanism: Periodically check the combination lock for smooth operation. If the dials become stiff, a small amount of graphite lubricant can be applied. Do not use oil-based lubricants.
- Hinges: The spring-assisted hinge is designed for durability. If any squeaking occurs, a light application of silicone spray lubricant can be used.
- Fasteners: Occasionally check all mounting fasteners to ensure they remain tight. Retighten if necessary.
7. Troubleshooting
If you encounter issues with your Lock'er Down Console Safe, consider the following troubleshooting steps:
Safe Door Will Not Open:
- Incorrect Combination: Double-check that the correct 4-digit combination is entered and aligned precisely with the indicator marks.
- Dials Not Fully Engaged: Ensure each dial is fully rotated to its number and not stuck between digits.
- Obstruction: Check for any items inside the console that might be obstructing the door mechanism.
Safe Door Is Loose or Rattles:
- Loose Mounting: Inspect the installation fasteners. If they are loose, carefully retighten them.
- Hinge Issue: Examine the spring-assisted hinge for any signs of damage or misalignment.
If these steps do not resolve the issue, please contact Lock'er Down customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | LD2045 |
| Material | 12-gauge Cold-Rolled Alloy Steel |
| Lock Type | 4-Digit Combination Lock |
| Finish | Black Powder Coat |
| Item Weight | 5.58 kg (12.3 lbs) |
| Parcel Dimensions | 41.91 x 41.66 x 12.19 cm (16.5 x 16.4 x 4.8 inches) |
| Mounting Type | Vehicle Console Integration |
Image 8.1: Dimensional view of the console safe, indicating key measurements.
9. Warranty and Support
Lifetime Warranty:
All Lock'er Down Safe products, including the LD2045 Console Safe, are proudly manufactured in the United States of America and come with a Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use.
Customer Support:
For warranty claims, technical assistance, or any questions regarding your Lock'er Down Console Safe, please contact the manufacturer directly. Refer to the Lock'er Down official website for current contact information.
