UBTECH IP-SW-002
UBTECH First Order Stormtrooper Robot User Manual
Model: IP-SW-002
1. Introduction
This manual provides essential information for the setup, operation, and maintenance of your UBTECH First Order Stormtrooper Robot. Please read this manual thoroughly before using the product to ensure proper function and safety.
The UBTECH First Order Stormtrooper Robot is an app-enabled interactive robot designed for immersive experiences. It features voice commands, facial recognition, and sentry patrolling capabilities, all controlled via a companion application.
2. What's in the Box
Carefully unpack the contents and ensure all items are present:
- UBTECH First Order Stormtrooper Robot
- Charger
- User Manual (this document)

Figure 2.1: Front view of the UBTECH First Order Stormtrooper Robot, showcasing its white armor and black visor.
3. Setup
3.1 Charging the Robot
Before first use, fully charge the robot. Connect the charger to the robot's charging port and plug it into a power outlet. The charging indicator light will show the charging status.
- Battery Type: 1 Lithium Polymer battery (included).
3.2 App Installation and Connection
The UBTECH First Order Stormtrooper Robot requires a companion app for full functionality. The app is compatible with iOS and Android devices.
- Download the "UBTECH Stormtrooper" app from the Apple App Store or Google Play Store.
- Ensure your mobile device's Wi-Fi is enabled.
- Turn on the Stormtrooper Robot.
- Open the app and follow the on-screen instructions to connect the robot to your Wi-Fi network and pair it with your device. The robot will speak its serial number during setup.
- Complete the initial setup, including account creation if prompted.

Figure 3.1: User interacting with the Stormtrooper Robot via the companion app on a tablet.
4. Operating the Robot
The Stormtrooper Robot offers various interactive features controlled through its companion app and built-in sensors.
4.1 Voice Commands
Issue direct orders to your Stormtrooper Robot by speaking clearly. The robot is equipped with triple array microphones for optimal voice recognition from various directions.
- Ensure the robot is powered on and connected to the app.
- Speak commands clearly and at a moderate volume.
4.2 Facial Recognition
Customize interactions by enabling facial recognition. The robot can store and recognize up to four faces.
- Access the facial recognition settings within the companion app.
- Follow the app's instructions to capture and store facial biometrics for yourself and up to three friends.
4.3 Sentry Patrolling
Command your Stormtrooper Robot to patrol a designated area, detecting and responding to intruders.
- In the app, select Sentry Mode.
- Define the patrol area using the app's interface.
- The robot will use its infrared sensor to navigate and avoid drops while patrolling.
4.4 Augmented Reality (AR) App Modes
Engage in immersive gameplay and missions through the augmented reality features of the app.
- Launch AR modes from the app's main menu.
- Protect the Galactic Empire by identifying Rebel fighters and launching attacks.
- Experience gameplay from both first and third-person views.
- Use the included blaster in Mission Mode to achieve objectives.

Figure 4.1: Multiple users engaging with the Stormtrooper Robot and its companion app.
5. Maintenance
5.1 Cleaning
To maintain the appearance and functionality of your Stormtrooper Robot:
- Wipe the robot's exterior with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
- Avoid exposing the robot to water or excessive moisture.
5.2 Storage
When not in use for extended periods, store the robot in a cool, dry place away from direct sunlight. Ensure the battery is partially charged before storage to prolong its lifespan.
6. Troubleshooting
If you encounter issues with your UBTECH First Order Stormtrooper Robot, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not turn on. | Low battery; Power switch off. | Charge the robot fully; Ensure the power switch is in the ON position. |
| Cannot connect to the app. | Wi-Fi issues; App not updated; Robot not in pairing mode. | Check Wi-Fi connection; Update the app to the latest version; Restart the robot and app; Follow app pairing instructions carefully. |
| Voice commands not recognized. | Background noise; Speaking too softly/quickly; Robot too far. | Reduce background noise; Speak clearly and at a moderate pace; Move closer to the robot. |
| Robot not moving correctly. | Obstruction; Sensor blockage; Uneven surface. | Clear any obstructions; Clean sensors; Operate on a flat, even surface. |
For further assistance, please refer to the official UBTECH support resources.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | IP-SW-002 |
| Product Dimensions | 5 x 6.5 x 11.02 inches |
| Item Weight | 1.7 pounds |
| Battery | 1 Lithium Polymer battery (included) |
| Connectivity | Wi-Fi, App-enabled (iOS and Android) |
| Recommended Age | 14 years and up |
| Manufacturer | UBTech (Toys) |
| Release Date | December 19, 2017 |
8. Warranty and Support
For warranty information and technical support, please visit the official UBTECH website or contact their customer service. Keep your purchase receipt as proof of purchase.
Safety Information: No specific safety warnings were provided beyond general product use. Always supervise children when operating the robot, especially given the recommended age of 14 years and up.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.