Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your BONTEC Under Desk PC Mount, Model CH001. This product is designed to optimize your workspace by securely mounting your computer tower beneath your desk, promoting better airflow, and protecting your PC from dust accumulation.
Product Overview
Key Features
- Space-Saving Design: Mounts your PC tower under the desk to free up desktop space.
- Dust Protection: Elevates the PC off the floor, reducing dust intake and improving air circulation.
- Adjustable Straps: Features adjustable straps in width and length for universal compatibility with various PC tower sizes, supporting a maximum load capacity of 20 kg.
- Robust Construction: Designed with durable steel and an anti-rust powder coating for maximum stability and longevity. The 178 cm straps provide secure holding for your central unit.
- Easy Installation: Comes with all necessary hardware for quick and simple setup, transforming your workspace into a more organized environment.
Components
- Mounting Brackets (Steel)
- Adjustable Straps with Buckles
- Anti-slip Pads
- Mounting Hardware (Screws)
Image: Detailed view of the BONTEC PC mount's features, including its anti-rust powder coating, adjustable buckles, and anti-slip pads for secure and durable use.
Setup and Installation
Before You Begin
- Ensure your desk surface is sturdy enough to support the combined weight of your PC tower and the mount.
- Verify the dimensions of your PC tower against the mount's adjustable range (Min: 30mm to Max: 650mm width, Min: 80mm to Max: 700mm height).
- Gather necessary tools: screwdriver, drill (if pre-drilling is required for your desk material).
Installation Steps
- Step 1: Position the Mounting Brackets. Place the steel mounting brackets under your desk in the desired location. Ensure there is enough clearance for your PC tower and that the position allows for easy access to ports.
- Step 2: Secure the Brackets. Use the provided screws to firmly attach the mounting brackets to the underside of your desk. Ensure all screws are tightened securely.
- Step 3: Attach the Straps. Thread the adjustable straps through the slots in the mounting brackets. Ensure the anti-slip pads are correctly positioned at the bottom of the straps to cradle your PC.
- Step 4: Insert the PC Tower. Carefully lift your PC tower and place it into the cradle formed by the straps and brackets. Adjust the straps to fit snugly around your PC tower.
- Step 5: Tighten the Straps. Securely fasten the adjustable buckles on the straps, ensuring your PC tower is held firmly in place without excessive movement. The straps are 178 cm long each, providing ample length for various tower sizes.
Image: Visual guide demonstrating the simple three-step installation process for the BONTEC Under Desk PC Mount.
Image: Detailed product dimensions, illustrating the adjustable width and height ranges for compatibility with various PC towers.
Operating Instructions
Once installed, the BONTEC Under Desk PC Mount operates passively. Ensure the straps remain securely fastened at all times. Periodically check the tightness of the straps and mounting screws to maintain stability and prevent accidental dislodgement of your PC tower.
Maintenance
Cleaning
Wipe the steel components with a dry or slightly damp cloth. Avoid abrasive cleaners that could damage the anti-rust powder coating.
Dust Prevention
The elevated position of your PC helps reduce dust accumulation compared to placing it directly on the floor. For optimal performance and longevity, regularly clean your PC's internal components as per its manufacturer's guidelines.
Image: Illustration of how the under-desk mount promotes air circulation and helps prevent dust accumulation inside the PC tower.
Troubleshooting
PC Tower Feels Unstable
- Check if the mounting screws are securely tightened to the underside of the desk.
- Ensure the adjustable straps are pulled taut and the buckles are locked firmly.
- Verify that the PC tower's dimensions are within the specified adjustable range of the mount.
Difficulty Fitting PC Tower
- Confirm the PC tower's dimensions. The mount accommodates widths from 30mm to 650mm and heights from 80mm to 700mm.
- Adjust the straps to their maximum length before attempting to insert larger towers.
Specifications
| Attribute | Value |
|---|---|
| Brand | BONTEC |
| Model Number | CH001 |
| Color | Black |
| Material | Metal |
| Maximum Load Capacity | 20 kg |
| Adjustable Width Range | 30mm - 650mm |
| Adjustable Height Range | 80mm - 700mm |
| Strap Length | 178 cm (per strap) |
| Compatible Devices | Computers (PC Towers) |
| Special Features | Adjustable, Anti-rust Powder Coating, Anti-slip Pads |
| Country of Origin | China |
Warranty and Support
Warranty Information
This BONTEC product comes with a 1-year manufacturer's warranty. Please retain your proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or warranty inquiries, please contact BONTEC customer service through the retailer where the product was purchased.
