1. Product Overview
The Movo VXR700 is a professional-quality shotgun condenser microphone engineered to capture clear, precise audio while effectively reducing unwanted background noise. It features an integrated shockmount for vibration isolation, a selectable 10dB gain switch to boost audio levels, and a low-cut filter to minimize low-frequency rumble. Designed for use with DSLR cameras and camcorders, this microphone is powered by a single AA battery (not included) and comes with both a standard foam windscreen and a furry 'deadcat' windscreen for superior wind noise reduction.
Image 1: Movo VXR700 Shotgun Condenser Video Microphone with foam windscreen, furry windscreen, and carrying pouch.
2. What's in the Box
- Movo VXR700 Shotgun Condenser Video Microphone with integrated foam windscreen
- Furry 'Deadcat' Windscreen
- Carrying Pouch
- Quick Setup Guide
- Comment Card
- Warranty Card
Note: 1 'AA' battery is required for operation and is NOT included.
3. Setup Instructions
3.1 Battery Installation
- Locate the battery compartment on the side of the microphone.
- Gently slide open the battery compartment cover.
- Insert one (1) AA battery, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
3.2 Mounting the Microphone
The VXR700 offers versatile mounting options:
- Cold Shoe Mount: Slide the microphone's cold shoe base into your camera's hot shoe or cold shoe mount. Tighten the locking knob to secure it in place.
- 1/4-inch Thread: The base also features a 1/4-inch thread, allowing direct attachment to standard tripods, light stands, or other accessories with a compatible screw.
Image 2: Movo VXR700 microphone attached to a DSLR camera via the cold shoe mount.
3.3 Connecting to Your Device
The microphone includes a built-in 3.5mm audio cable. Plug this cable into the 3.5mm microphone input jack on your DSLR camera, camcorder, or other compatible recording device.
3.4 Windscreen Usage
- Foam Windscreen: The microphone comes with a pre-installed foam windscreen, suitable for reducing light wind noise and plosives in indoor or calm outdoor environments.
- Furry 'Deadcat' Windscreen: For significant wind noise reduction (up to 40dB), slide the furry 'deadcat' windscreen over the foam windscreen. This is ideal for outdoor recording in windy conditions.
4. Operating Instructions
The control switches are located on the back of the microphone unit.
- Power Switch (ON/OFF): Slide the switch to 'ON' to power on the microphone. Ensure the microphone is powered off when not in use to conserve battery life.
- Gain Switch (0dB / +10dB):
- 0dB: Standard gain setting.
- +10dB: Boosts the audio signal by 10 decibels. Use this setting when recording quieter sources or when your camera's preamps are noisy, to achieve a stronger signal-to-noise ratio.
- Low-Cut Filter Switch: Activates a low-cut filter that reduces low-frequency sounds (e.g., air conditioning hum, traffic rumble). This helps to improve clarity of speech and other mid-to-high frequency sounds.
Image 3: Rear view of the Movo VXR700, highlighting the power, gain, and low-cut filter switches.
Official Product Video: Movo VXR700 Shotgun Condenser Video Microphone Overview
Video 1: This video provides a detailed overview of the Movo VXR700 Shotgun Condenser Video Microphone, including unboxing, feature explanations, and an audio comparison demonstrating its performance against a camera's built-in microphone.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the microphone body. Do not use liquid cleaners or solvents.
- Storage: Store the microphone in its provided carrying pouch when not in use to protect it from dust, moisture, and physical damage.
- Battery: Remove the AA battery if the microphone will not be used for an extended period to prevent battery leakage.
6. Troubleshooting
- No Audio/Low Audio:
- Ensure the microphone is powered 'ON'.
- Check that the battery is correctly installed and has sufficient charge.
- Verify the 3.5mm audio cable is securely plugged into both the microphone and your recording device.
- Adjust the gain switch to '+10dB' if the audio is too quiet.
- Check your camera's audio input settings to ensure the external microphone is selected and input levels are appropriate.
- Excessive Background Noise:
- Ensure the low-cut filter is engaged if low-frequency hums are present.
- Use the furry 'deadcat' windscreen in windy conditions.
- Position the microphone closer to the sound source and further from noise sources.
7. Specifications
| Feature | Specification |
|---|---|
| Microphone Form Factor | Shotgun |
| Polar Pattern | Unidirectional |
| Connectivity Technology | 3.5mm TRS (integrated cable) |
| Power Source | Battery Powered (1x AA, not included) |
| Audio Sensitivity | 40 Decibels |
| Signal-to-Noise Ratio | 75 dB |
| Hardware Platform | Camcorder, Camera |
| Mounting Options | Cold Shoe, 1/4-inch Thread |
| Item Weight | 8.8 ounces |
| Package Dimensions | 7.8 x 4.69 x 3.5 inches |
8. Warranty and Support
The Movo VXR700 Shotgun Condenser Video Microphone comes with a 1 Year Movo Warranty. Movo's support center is based in the U.S.A.
For technical assistance, warranty claims, or any questions regarding your product, please refer to the contact information provided on the included comment card or visit the official Movo website.
