Introduction
This manual provides detailed instructions for the safe and effective use of your Enjoybot Bluetooth Beanie. Please read this guide thoroughly before operating the device and retain it for future reference.
Product Features
- Fashion & Tech Combine: Super soft Acrylic and Polyester knit beanie, keeps your head warm while allowing hands-free listening and calls via Bluetooth.
- Newest Bluetooth Technology: Equipped with high-efficiency Bluetooth wireless technology for easy and fast pairing with Bluetooth-enabled devices such as smartphones, tablets, and digital media players. Wireless range up to 33 feet (10 meters).
- Ultra-long Talking & Music Time: Built-in rechargeable Li-Ion battery provides up to 6 hours of playtime and 60 hours of standby time with only 1.5 hours of charging.
- Simple Button Operation: User-friendly control panel with built-in wireless stereo speaker and microphone for convenient control of music playback (skip tracks, adjust volume) and call handling (answer, hang up) without needing to access your phone.
- Easily Washable & Practical: Easy to wash after removing the built-in Bluetooth module. Suitable for various occasions including outdoor activities, car travel, beach, park, office, and home.
Image: Overview of Enjoybot Bluetooth Beanie features.
Setup
Charging the Beanie
Before first use, fully charge the Enjoybot Bluetooth Beanie. Connect the Micro USB charge cable to the charging port on the beanie and to a USB power source. The indicator light will show charging status. Charging time is approximately 1.5 hours.
Image: Enjoybot Bluetooth Beanie charging via Micro USB.
Pairing with a Bluetooth Device
- Ensure the beanie is charged and turned off.
- Press and hold the 'Play' button for 5 seconds until the red and blue lights flash alternatively. This indicates pairing mode.
- Enable Bluetooth on your device (smartphone, tablet, etc.) and search for available devices.
- Select 'Enjoybot' from the list of devices. Once connected, the indicator light will show a steady blue light or flash slowly.
Image: Control panel with indicator light and buttons for pairing.
Video: Official product video demonstrating the pairing process, music control, and call handling features of the Enjoybot Bluetooth Beanie.
Operating Instructions
Power On/Off
- To power on, press and hold the 'Play' button until the indicator light turns on.
- To power off, press and hold the 'Play' button until the indicator light turns off.
Music Playback
- Press the 'Play' button to play or pause music.
- Press the '+' button to increase volume or skip to the next song.
- Press the '-' button to decrease volume or go to the previous song.
Call Handling
- When a call comes in, the beanie will ring.
- Press the 'Play' button to answer an incoming call.
- Press the 'Play' button again to end a call.
- Press and hold the 'Play' button to reject an incoming call.
Image: Users demonstrating music and call functions with the Enjoybot Bluetooth Beanie.
Maintenance
Washing Instructions
- Before washing, you MUST remove the control panel and speakers from the beanie.
- Carefully detach the electronic components from their pockets inside the beanie.
- Hand wash the beanie only.
- Allow the beanie to air dry completely before reinserting the electronic components.
Image: Enjoybot Bluetooth Beanie in water, illustrating removable components for washing.
Troubleshooting
Cannot Pair
- Ensure the beanie is charged and in pairing mode (red and blue lights flashing alternatively).
- Make sure Bluetooth is enabled on your device and it is within 33 feet (10 meters) of the beanie.
- Try restarting both the beanie and your Bluetooth device.
No Sound
- Check the volume levels on both the beanie and your connected device.
- Ensure the beanie is properly paired and connected to your device.
Short Battery Life
- Ensure the beanie is fully charged before use (1.5 hours charging time).
- Battery life can vary based on volume level and usage.
Specifications
| Bluetooth Version | 4.1 + EDR |
| Frequency | 2.402 Ghz - 2.480 GHz |
| Transmission Distance | Up to 33 feet (10 meters) |
| Battery | Li-ion 3.7V/130mAh |
| Talking Time | Up to 6 hours |
| Standby Time | Up to 60 hours |
| Charging Time | 1.5 hours |
| Fabric Type | Acrylic, Polyester |
| Care Instructions | Hand Wash Only (after removing electronics) |
| Item Model Number | BB001-GY |
| Product Dimensions | 8.5 x 1.2 x 9.8 inches; 5.61 ounces |
Warranty & Support
Enjoybot provides a 1-year warranty for this Bluetooth Beanie, covering defects in materials and workmanship under normal use. For support or warranty claims, please contact Enjoybot customer service.