1. Introduction
This manual provides essential information for the proper use and maintenance of your Taylor Digital Scale for Body Weight, Model 73794012. Designed for consistent accuracy and ease of use, this scale features a high 400 lb capacity, a clear digital display, and durable construction. Please read these instructions thoroughly before first use to ensure optimal performance and longevity of your device.
Image: Front view of the Taylor Digital Scale, displaying a weight of 126.4. The scale is white with a prominent digital readout.
2. Safety Information
- Always use the scale on a hard, flat, and stable surface. Using it on carpet or uneven flooring may result in inaccurate readings.
- Do not immerse the scale in water or other liquids. Clean with a damp cloth only.
- Avoid dropping the scale or subjecting it to strong impacts, as this may damage the internal components.
- This scale is intended for personal body weight measurement only. Do not use for commercial purposes.
- Keep out of reach of children.
- The product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Upon opening the package, verify that all components are present and undamaged:
- Taylor Digital Scale for Body Weight (Model 73794012)
- 3 x AAA Batteries
4. Setup
4.1 Battery Installation
- Locate the battery compartment on the underside of the scale.
- Open the battery compartment cover.
- Insert the 3 AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
Image: The underside of the Taylor Digital Scale, revealing the battery compartment and the four anti-skid foot pads.
4.2 Initial Placement and Calibration
For accurate readings, place the scale on a hard, flat, and level surface. Avoid carpets, rugs, or uneven tiles. The scale features step-on technology, which means it will automatically turn on when you step on it. For the first use or if the scale has been moved, it is recommended to perform an initial calibration:
- Gently tap the center of the scale with your foot to activate it. The display will show '0.0' or '0.00'.
- Allow the scale to turn off automatically (display will go blank).
- The scale is now calibrated and ready for use.
5. Operating Instructions
5.1 Taking a Measurement
- Ensure the scale is on a hard, flat surface.
- Step onto the scale with bare feet, centering your weight evenly. The scale will automatically turn on and begin measuring.
- Stand still until your weight is displayed and flashes a few times, then locks on the final reading.
- Step off the scale. The display will remain on for a few seconds before automatically turning off to conserve battery life.
Image: The Taylor Digital Scale positioned on a tiled floor, demonstrating its typical placement in a home environment.
5.2 Tips for Accurate Readings
- Always weigh yourself at the same time of day, preferably in the morning before breakfast and after using the restroom.
- Wear minimal clothing or no clothing for the most consistent results.
- Ensure the scale is placed on a consistent, hard, and flat surface. Moving the scale frequently may require re-calibration.
- Avoid weighing immediately after intense exercise or showering, as body fluid levels can fluctuate.
6. Maintenance and Care
6.1 Cleaning
To clean your scale, wipe the surface with a damp cloth and mild detergent. Do not use abrasive cleaners or immerse the scale in water. Dry thoroughly after cleaning.
6.2 Storage
Store the scale in a cool, dry place. Avoid extreme temperatures and direct sunlight. Do not place heavy objects on the scale when not in use.
6.3 Battery Replacement
When the display shows a low battery indicator (e.g., 'Lo' or a battery icon), it is time to replace the batteries. Follow the battery installation steps in Section 4.1.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display / Scale does not turn on | Dead or incorrectly installed batteries. | Check battery polarity or replace batteries. |
| Inaccurate or inconsistent readings | Scale on uneven surface; not calibrated; excessive movement during measurement; scale moved between readings. | Ensure scale is on a hard, flat surface. Perform initial calibration (tap to activate, let turn off). Stand still during measurement. Avoid moving the scale between uses. |
| 'Err' message on display | Overload (weight exceeds capacity); internal error. | Ensure weight is within the 400 lb capacity. Step off the scale, wait for it to reset, then try again. If persistent, contact customer support. |
| Display shows 'Lo' | Low battery. | Replace the 3 AAA batteries. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 73794012 |
| Capacity | 400 lb (180 kg) |
| Increments | 0.2 lb |
| Product Dimensions | 11.8 x 11.8 x 1.2 inches |
| Weight | 3.75 Pounds |
| Display Type | LCD with white digits and silver bezel |
| Power Source | 3 x AAA Batteries (included) |
| Special Features | Step-on technology, Auto-off feature |
| Color | White |
| Manufacturer | Lifetime Brands Inc. |
9. Warranty and Support
9.1 Warranty Information
Your Taylor Digital Scale for Body Weight is covered by a 5-year limited warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.
9.2 Customer Support
For warranty claims, technical assistance, or any questions regarding your product, please contact Taylor customer support. Refer to the product packaging or the official Taylor website for the most current contact information.
