Introduction
The SPOOBOOLA Party Lights Starry Sky Projector Ocean Wave Projector 3 in 1 (Model EMS-38) is a versatile lighting device designed to enhance various environments. It integrates three distinct lighting effects: a party light with disco ball and laser patterns, a starry sky projector, and an ocean wave projector. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device.
Image: The SPOOBOOLA 3-in-1 projector unit, showcasing its dual projection lenses and the included remote control. The background illustrates the combined laser and ocean wave light effects.
Safety Instructions
- Do not look directly into the light source: Direct exposure to the laser light may cause eye damage.
- Indoor Use Only: This device is designed for indoor use. Do not expose it to rain, moisture, or extreme temperatures.
- Proper Ventilation: Ensure the device has adequate ventilation to prevent overheating. Do not cover ventilation openings.
- Power Source: Use only the provided power adapter. Ensure the power supply voltage matches the device's requirements (5 Volts).
- Children Safety: Keep the device out of reach of small children. Adult supervision is recommended during operation.
- Cleaning: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners.
- Avoid Disassembly: Do not attempt to disassemble or repair the device yourself. Refer all servicing to qualified personnel.
Package Contents
Please check the package contents upon opening to ensure all items are present and undamaged:
- 1 x SPOOBOOLA 3-in-1 Projector Unit
- 1 x Remote Control (requires 2 AAA batteries, not included)
- 1 x USB Power Cable
- 1 x Power Adapter
- 1 x User Manual (this document)
Image: Visual representation of the product packaging list, showing the projector, remote control, USB cable, power adapter, and instruction manual.
Product Overview
Device Components
Image: Detailed diagram of the projector's front and rear panels, indicating key components such as the disco ball light, red light, starpoint effect light, IR receiver, green light, water ripple light, mode toggle button, microphone, power connector, and cooling fan.
- Disco Ball Light
- Red Light
- Starpoint Effect Light
- IR Receiver
- Green Light
- Water Ripple Light
- Mode Toggle Button
- Microphone (for Sound Activated mode)
- Power Connector (USB-C)
- Cooling Fan
Remote Control Functions
Image: Layout of the remote control, detailing each button's name and its corresponding function, including power, pause, strobe, various light modes, speed adjustments, and color controls.
| Button | Function |
|---|---|
| ON/OFF | Powers the light projector on or off. |
| PAUSE | Stops light motor rotation. Press again to release before selecting other functions. |
| STROBE | Activates an effect where all lights appear and disappear quickly. |
| STAR LIGHT | Activates the star light effect. Ocean light will automatically rotate and change colors. |
| PARTY LIGHT | Activates the party light effect (Magical RGB disco ball + red & green light pattern). Ocean light will automatically rotate and change light effects. |
| OCEAN LIGHT | Activates the romantic water wave pattern. Will automatically rotate and change colors. |
| MUSIC1 | Star light/party light/ocean light will automatically change effects and colors, flashing with the rhythm of music. |
| MUSIC2 | No lighting effects when no music. All lights will rotate and change with the rhythm of music. |
| SPEED+ / SPEED- | Controls the light motor speed (faster/slower). |
| BALL COLOR | Controls the magical RGB disco ball on/off and color. Press for 3 seconds to turn off the disco ball. Press briefly to change the color. |
| OCEAN COLOR | Controls the ocean light on/off and color. Press for 3 seconds to turn off the ocean light. Press briefly to change the color. |
| PATTERN COLOR | Controls the red & green light pattern on/off and color. Press for 3 seconds to turn off the pattern. Press briefly to change the color. |
Note: The remote control requires 2 AAA batteries (not included).
Setup
1. Remote Control Battery Installation
Open the battery compartment on the back of the remote control. Insert two AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. Power Connection
Connect the provided USB power cable to the power connector (9) on the back of the projector unit. Plug the other end of the USB cable into the power adapter, and then plug the adapter into a standard electrical outlet.
3. Placement
Place the projector on a stable, flat surface. For optimal projection, position the device where its light beams can cover the desired area (e.g., ceiling, wall, floor). The device can cover an area of approximately 269-323 sq. ft. at a height of 3 meters. Ensure there is sufficient space around the device for proper ventilation.
Image: Product size diagram, illustrating the dimensions of the projector unit (7.8 inches long, 3.2 inches wide, 2.9 inches high) and the remote control (5.9 inches long, 1.6 inches wide).
Operation
Powering On/Off
Press the ON/OFF button on the remote control or the mode toggle button (7) on the device to turn the projector on or off.
Selecting Light Modes
The projector offers three primary lighting effects and two music-activated modes. Use the dedicated buttons on the remote control to select your desired mode:
- STAR LIGHT: Projects clear night scenes with stars and clouds. Clouds are available in 7 different colors.
- PARTY LIGHT: Combines laser patterns (red & green) with the disco ball light for dynamic effects.
- OCEAN LIGHT: Creates a water ripple effect with 14 different color combinations (red, green, blue, green-red, blue-red, red-green-blue).
- MUSIC1 (Sound Activated): Lights change effects and colors in sync with music.
- MUSIC2: Lights rotate and change colors with the rhythm of music, even without specific lighting effects.
Image: A collage demonstrating various projection effects, including intricate laser patterns, a dense starry sky, and a vibrant ocean wave effect.
Image: The starry sky projection lamp effect illuminating a bedroom ceiling and walls, creating a serene night sky ambiance.
Image: The party light effect, featuring vibrant laser beams and patterns projected onto a floor, suitable for social gatherings.
Image: The ocean wave projector effect creating a dynamic water surface on a floor, enhanced with simulated fish and coral for an immersive aquatic scene.
Adjusting Speed and Colors
Use the SPEED+ and SPEED- buttons to adjust the rotation speed of the light motor. For specific color adjustments:
- BALL COLOR: Briefly press to cycle through disco ball colors. Press and hold for 3 seconds to turn the disco ball light on/off.
- OCEAN COLOR: Briefly press to cycle through ocean wave colors. Press and hold for 3 seconds to turn the ocean light on/off.
- PATTERN COLOR: Briefly press to cycle through laser pattern colors. Press and hold for 3 seconds to turn the laser pattern on/off.
Maintenance
Cleaning
Before cleaning, ensure the device is unplugged from the power source. Use a soft, dry, lint-free cloth to wipe the exterior of the projector. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components. Gently wipe the projection lenses to ensure clear light output.
Storage
When not in use, store the projector in a cool, dry place, away from direct sunlight and excessive dust. It is recommended to store it in its original packaging to protect it from damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | No power connection; faulty power adapter/cable. | Ensure power cable is securely connected and adapter is plugged into a working outlet. Try a different outlet. |
| Remote control not working. | Batteries are dead or incorrectly inserted; remote not aimed at IR receiver. | Replace AAA batteries, ensuring correct polarity. Aim the remote directly at the IR receiver (4) on the projector. |
| Lights are dim or blurry. | Lenses are dirty; projector placed too far from projection surface. | Clean the projection lenses with a soft, dry cloth. Move the projector closer to the desired projection surface. |
| Sound Activated mode (MUSIC1) not responding. | Microphone obstructed; music volume too low. | Ensure the microphone (8) is not covered. Increase the volume of the music source. |
| Device overheats. | Poor ventilation; cooling fan obstructed. | Ensure the cooling fan (10) is not blocked and there is ample space around the device for airflow. Turn off the device and let it cool down. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | EMS-38 |
| Brand | SPOOBOOLA |
| Color | BLACK 02 |
| Material | Plastic |
| Finish Type | Alloy, Aluminum |
| Light Source Type | Light Emitting Diode (LED) |
| Power Source | Corded Electric |
| Voltage | 5 Volts |
| Brightness | 900 lumen |
| Maximum Compatible Light Source Wattage | 5 Watts |
| Item Weight | 560 Grams (1.23 pounds) |
| Product Dimensions | 7.86"L x 3.9"W x 3"H |
| Batteries Required for Remote | 2 AAA (not included) |
| Mounting Type | Floor Mount |
| UPC | 737353582784 |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official SPOOBOOLA website. Keep your purchase receipt as proof of purchase for any warranty claims.