KWANWA KW715S 2-in-1 Alarm Clock and Indoor Thermometer Instruction Manual

1. Product Overview

The KWANWA KW715S is a versatile 2-in-1 device functioning as both a digital alarm clock and an indoor thermometer. Designed for portability and ease of use, it features a clear digital display, adjustable brightness, and long-lasting battery operation. Simply flip the device to switch between time and temperature display modes.

KWANWA KW715S 2-in-1 Alarm Clock and Indoor Thermometer with dimensions — Image: The KWANWA KW715S device displaying time and temperature, highlighting its compact dimensions (4.7"W x 1.9"H).

2. Setup

2.1 Battery Installation

The KWANWA KW715S operates on 2x AA alkaline batteries (not included). Ensure correct polarity when inserting the batteries into the compartment located on the back of the device.

Back view of KWANWA KW715S showing battery compartment — Image: Rear view of the alarm clock, illustrating the battery compartment for two AA batteries.

2.2 Initial Time Setting

Press and hold the TIME SET button (located on the back) for 2 seconds until the hour digits begin to flash.
Use the HOUR and MIN buttons to adjust the time.
Press TIME SET again to confirm and exit time setting mode.

2.3 Temperature Unit Selection (°C/°F)

The device allows you to switch between Celsius (°C) and Fahrenheit (°F) display modes. This can be done by flipping the clock over to display temperature, then using the dedicated °C/°F button if available, or by following specific instructions in the operating section.

KWANWA KW715S displaying temperature in Celsius and Fahrenheit — Image: Two KWANWA KW715S units, one displaying temperature in Celsius (28°C) and the other in Fahrenheit (82°F).

3. Operating Instructions

3.1 Setting the Alarm

Press and hold the AL SET button (on the back) for 2 seconds until the alarm hour digits flash.
Use the HOUR and MIN buttons to set your desired alarm time.
Press AL SET again to confirm and exit alarm setting mode.

3.2 Alarm On/Off

Use the AL ON/OFF switch (on the back) to activate or deactivate the alarm. When the alarm is active, an alarm icon will appear on the display.

3.3 Snooze Function

When the alarm sounds, gently touch the large SNOOZE button on the top of the clock. This will temporarily silence the alarm for 7 minutes. The snooze function can be repeated up to 3 times.

KWANWA KW715S showing snooze function and alarm sound escalation — Image: The alarm clock displaying 8:00, with an illustration of a hand touching the snooze button and a person waking up. Text indicates 7-minute snooze and gradual alarm volume increase.

3.4 Adjustable Brightness

Press the TIME SET button for 2 seconds to cycle through 3 levels of brightness: low, middle, and high. The clock also features an automatic night mode, which dims the display between 8:00 PM and 6:00 AM to create a peaceful sleeping environment.

KWANWA KW715S displaying different brightness levels — Image: Three views of the alarm clock demonstrating different LED brightness levels: Bright, Medium, and Dim.

3.5 Switching Between Time and Temperature

To switch between displaying the time and the indoor temperature, simply flip the alarm clock upside down. The display will automatically change to show the current indoor temperature.

KWANWA KW715S showing time and temperature display by flipping — Image: Two KWANWA KW715S units, one displaying time (12:00) and the other displaying temperature (32°C), with arrows indicating the flip action to switch modes.

3.6 12-Hour / 24-Hour Mode

The clock supports both 12-hour and 24-hour time formats. Refer to the buttons on the back for the specific button to toggle between these modes (e.g., a dedicated 12/24HR button).

4. Maintenance

4.1 Battery Replacement

The device features a low battery indicator. When this indicator appears, it is time to replace the 2x AA alkaline batteries to ensure continuous operation and accurate readings. The improved design allows batteries to last over 1 year.

4.2 Cleaning

To clean the clock, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the display or casing.

5. Troubleshooting

Display Flickering: If you observe flickering in videos of the product, please note that this is often an artifact of video recording and not indicative of actual product performance. The display is stable in real-life use.
Alarm Not Sounding: Ensure the AL ON/OFF switch is in the 'ON' position. Verify that the alarm time is correctly set. Check the battery level and replace batteries if the low battery indicator is active.
Incorrect Time/Temperature: Re-set the time following the instructions in Section 2.2. For temperature, ensure the device is placed in a stable indoor environment away from direct heat sources or drafts for accurate readings.
Low Battery Indicator: This icon signals that the batteries are running low and should be replaced soon.

6. Specifications

Feature	Detail
Brand	KWANWA
Model Number	KW715S
Display Type	Digital
Color	Black
Product Dimensions	4.7"W x 1.9"H
Item Weight	3.17 ounces (0.09 Kilograms)
Power Source	Battery Powered (2 AA batteries required, not included)
Special Feature	Battery Indicator, Indoor Thermometer, Adjustable Brightness, Snooze
Temperature Accuracy	± 0.1°C (Sensor made in USA, updates every 20s)
Time Accuracy	± 30 seconds per month
Room Type	Bedroom, Kid's Room, Schoolroom, Dining Room, Living Room, Guest room, Bathroom, Kitchen, RV, Holiday House, Home Office

7. Warranty and Support

For warranty information or product support, please contact KWANWA customer service at: support@odokeeshop.com.