Mount-It! MI-356 Universal Device Mounting Bracket Instruction Manual

1. Product Overview

The Mount-It! MI-356 Universal Device Mounting Bracket provides a secure and discreet solution for mounting various electronic devices. This bracket is designed to hold cable boxes, modems, routers, streaming devices, and smaller gaming consoles, either directly to a wall or behind a television. Its adjustable design accommodates a range of device sizes, helping to organize your entertainment area by concealing devices and cables.

Figure 1: Mount-It! MI-356 Universal Device Mounting Bracket components.

2. Safety Information

Please read and understand all instructions before installation and use. Failure to follow these instructions may result in property damage or personal injury.

• Ensure the mounting surface (wall or TV VESA holes) can safely support the weight of the mount and the device being installed.
• Do not exceed the maximum weight capacity of 11 lbs (5 kg).
• Use appropriate tools and hardware for installation. If mounting to drywall, locate studs or use suitable anchors.
• Keep small parts away from children.
• If you have any doubts about the installation process, consult a qualified professional.

3. Package Contents

Verify that all components are present before beginning installation:

• Mounting Plate (Perforated Steel)
• Adjustable Device Cradle
• Mounting Hardware (Screws, Anchors, Washers for various TV VESA sizes and wall types)
• Cable Ties

4. Setup & Installation

The MI-356 bracket can be installed directly to a wall or behind a TV using its VESA mounting holes.

4.1 Preparing the Device Cradle

1. Attach the adjustable device cradle to the mounting plate using the provided screws. Ensure it is securely fastened.
2. Adjust the width of the cradle to fit your device. Turn the width adjustment knobs (refer to Figure 2) to expand or contract the cradle. The adjustable width range is between 1.75 inches and 2.75 inches.
3. The cradle features padding to protect your device from scratches.

Figure 2: Device cradle with padding and width adjustment knobs.

Figure 3: Adjustable width range of the device cradle.

4.2 Mounting Behind a TV

1. Locate the VESA mounting holes on the back of your television. These are typically used for TV wall mounts.
2. Align the mounting plate with the VESA holes. The plate is designed to integrate with existing TV wall mounts or directly to the TV.
3. Use the appropriate screws (M4, M6, or M8) and spacers from the provided hardware kit to secure the mounting plate to the TV's VESA holes. Ensure the plate is firmly attached.
4. Once the mounting plate is secure, place your device into the adjustable cradle. Use the included cable ties to further secure the device to the mounting plate if desired (refer to Figure 4).

Figure 4: Installation steps for mounting behind a TV.

Figure 5: Example of a device secured in the mount with cable ties.

4.3 Wall Mounting

1. Choose a suitable location on the wall. Use a stud finder to locate a wall stud for optimal security, or use appropriate drywall anchors if mounting into drywall.
2. Hold the mounting plate against the wall at the desired height and mark the drilling points.
3. Drill pilot holes as necessary.
4. Secure the mounting plate to the wall using the provided screws and anchors.
5. Place your device into the adjustable cradle and secure it with cable ties.

5. Operation

Once installed, the Mount-It! MI-356 bracket securely holds your device. Ensure that all cables connected to your device are routed neatly and do not interfere with the TV or other components. The open design of the mounting plate allows for ventilation and access to ports.

Figure 6: Example of a clean setup with the device hidden behind the TV.

6. Maintenance

• Periodically check all screws and connections to ensure they remain tight and secure.
• Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Ensure adequate airflow around your mounted device to prevent overheating.

7. Troubleshooting

• Device does not fit in cradle: Ensure the width adjustment knobs are fully extended. The cradle supports devices between 1.75 and 2.75 inches in width.
• Mount feels unstable: Re-check all mounting screws and ensure they are tightened securely. If wall-mounted, verify that appropriate anchors or stud mounting was used.
• Remote control issues: While the mount is designed to allow remote signals to pass, some devices or TV setups might experience interference. Ensure the device's IR receiver (if applicable) is not completely obstructed. Consider using an IR extender if issues persist.
• Missing parts: Refer to the "Package Contents" section. If any parts are missing, contact Mount-It! customer support.

8. Specifications

Figure 7: Detailed dimensions of the Mount-It! MI-356 bracket.

9. Warranty & Support

Mount-It! products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Mount-It! website. If you encounter any issues or require assistance, please contact Mount-It! customer support.

Contact Information:

• Website: www.mount-it.com
• Email: Refer to website for contact form or email address.
• Phone: Refer to website for customer service phone number.