1. Product Overview
The JUBEST Double-Sided Stainless Steel Sliding Door Handle is designed for both interior and exterior applications, offering a robust and stylish solution for various door types. Constructed from high-quality 304 stainless steel with a powder-coated finish, this handle is built for durability and resistance against rust and corrosion.
This handle is suitable for wooden doors, sliding barn doors, garage doors, pocket doors, and swing doors. Its double-sided design allows for convenient operation from either side of the door.
Image 1: Key features of the JUBEST sliding door handle, highlighting its high-quality steel construction, smooth edges for safety, and modern, stylish design.
2. Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, please contact customer support.
- 2 x Handle Bars (15-3/4'' length each)
- Mounting Screws
- Washers
- Hex Wrench
Image 2: A visual representation of all items included in the product package, laid out clearly for identification.
3. Specifications
| Attribute | Detail |
|---|---|
| Model Number | TY2.070.083.92A |
| Material | 304 Stainless Steel |
| Finish | Powder-coated (Silver) |
| Total Length | 15-3/4 inches (40.0 cm) |
| Handle Diameter | 1 inch (2.5 cm) |
| Door Thickness Compatibility | 1-3/8 inches to 1-3/4 inches (3.5 cm to 4.4 cm) |
| Special Features | Anti-rust, Anti-corrosion |
| Product Dimensions (L x W x H) | 39.88 x 2.54 x 2.54 cm (15.7 x 1 x 1 inches) |
| Product Weight | 616.89 grams (1.36 lbs) |
Image 3: Detailed product dimensions, illustrating the handle's length and the range of door thicknesses it can accommodate.
4. Setup (Installation)
Follow these steps for proper installation of your JUBEST sliding door handle. Ensure you have the necessary tools: a drill, drill bits, and a measuring tape.
- Measure and Mark: Determine the desired height for your handle on the door. Using a measuring tape, mark two points on the door where the mounting holes will be drilled. Refer to the product dimensions diagram for the exact distance between the mounting points (approximately 11 13/16 inches center-to-center for the 15-3/4'' handle).
- Drill Holes: Carefully drill two holes through the door at the marked locations. Ensure the drill bit size matches the diameter of the mounting screws. Drill straight to avoid damaging the door.
- Insert Screws: Insert the long mounting screws through the pre-drilled holes from one side of the door.
- Attach Handles: Place a washer onto each screw on both sides of the door. Align one handle bar with the screws on one side and the other handle bar with the screws on the opposite side.
- Tighten: Using the provided hex wrench, tighten the screws to secure both handle bars firmly to the door. Do not overtighten, as this may damage the door or the handle.
Note: If your door is thicker than 1-3/4 inches, you may need to purchase longer screws separately to ensure proper installation.
Image 4: An illustration demonstrating the installation process, including drilling and securing the handle components to the door.
5. Operating Instructions
The JUBEST Double-Sided Sliding Door Handle is designed for simple and intuitive operation.
- To open or close a sliding door, grasp either handle bar firmly.
- Apply gentle, consistent force in the direction of the door's movement.
- Ensure the door slides smoothly along its track without obstruction.
This handle is suitable for various applications, including:
- Bedroom doors
- Living room doors
- Kitchen doors
- Bathroom doors
- Barn doors
- Garage doors
- Pocket doors
Image 5: Examples of the handle's application in different home environments, such as bedrooms, living rooms, kitchens, and bathrooms.
6. Maintenance
To ensure the longevity and appearance of your JUBEST door handle, follow these simple maintenance guidelines:
- Cleaning: Wipe the handle regularly with a soft, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Inspection: Periodically check the mounting screws to ensure they remain tight. If any screws feel loose, gently tighten them with the hex wrench.
- Lubrication: If the door mechanism (not the handle itself) becomes stiff, apply a silicone-based lubricant to the door track and rollers as recommended by your door manufacturer.
- Rust Prevention: While the handle is made of anti-rust stainless steel, prolonged exposure to harsh outdoor elements or corrosive substances can affect its finish. Clean promptly if exposed to such conditions.
7. Troubleshooting
If you encounter any issues with your JUBEST door handle, refer to the following common problems and solutions:
- Handle feels loose:
- Check if the mounting screws are loose. Tighten them using the provided hex wrench.
- Ensure the washers are correctly placed between the handle and the door surface.
- Door is difficult to slide:
- This issue is typically related to the door's sliding mechanism, not the handle itself. Inspect the door track for obstructions or debris.
- Clean the door track and lubricate the rollers if necessary, following the door manufacturer's recommendations.
- Scratches or damage to the finish:
- Avoid using abrasive cleaning materials or harsh chemicals.
- Minor scratches may be polished with a non-abrasive stainless steel cleaner, but deep scratches may require professional attention or replacement.
If the problem persists after attempting these solutions, please contact customer support.
8. Warranty and Support
JUBEST provides a 2-year quality guarantee for this product. This warranty covers defects in materials and workmanship under normal use.
If you experience any issues or have questions regarding your JUBEST Double-Sided Stainless Steel Sliding Door Handle, please contact our customer service team. We are committed to providing timely assistance and support.
For support, please refer to the contact information provided with your purchase or visit the official JUBEST website.
