Introduction
The Perixx PERIMICE-719 is a right-handed wireless mini vertical mouse designed to promote a natural 'handshake' posture, aiming to reduce wrist strain and discomfort often associated with traditional mice. Its ergonomic design supports long hours of comfortable productivity, making it suitable for users with small to medium-sized hands.
This mouse features a 6-button layout, including a DPI switch for adjustable cursor sensitivity and dedicated back/forward buttons for convenient web browsing. The main left and right click buttons are designed for quiet operation to minimize distractions.
Image: The vertical design of the PERIMICE-719 promotes a natural hand position, reducing wrist twisting.
Image: The PERIMICE-719 is designed to fit comfortably in small to medium right hands.
Package Contents
- 1 x Perixx PERIMICE-719 Wireless Mini Vertical Mouse
- 1 x USB Receiver
- 1 x User Manual
Image: Contents of the Perixx PERIMICE-719 package, including the mouse, USB receiver, and manual.
Setup Instructions
- Battery Installation: The PERIMICE-719 requires 2 x AAA alkaline batteries (not included). Open the battery compartment on the underside of the mouse, insert the batteries according to the polarity indicators, and close the compartment.
- Connect USB Receiver: Locate the USB receiver, typically stored in a slot on the underside of the mouse. Plug the USB receiver into an available USB port on your computer.
- Power On: Turn on the mouse using the ON/OFF switch located on the bottom of the mouse.
- Automatic Connection: The mouse should automatically connect to your computer. If the connection is not established, proceed to the binding process.
- Binding Process (if needed): If the mouse does not connect automatically or if you are using a replacement receiver, follow these steps:
- Plug the receiver into a USB port on your computer and ensure fully charged batteries are in your mouse.
- Switch the mouse to the ON position.
- Press down on the right mouse button and the scroll wheel simultaneously for 10 seconds. The light on the mouse will flash for several seconds during the binding process.
Image: Visual guide for the PERIMICE-719 binding process to establish connection.
Operating Instructions
Button Functions
The PERIMICE-719 features six buttons for enhanced productivity:
- Left Click: Standard primary click function.
- Right Click: Standard secondary click function.
- Scroll Wheel: For vertical scrolling. Can also be pressed for middle-click functionality.
- DPI Switch: Adjusts cursor sensitivity (DPI).
- Page Forward Button: Navigates forward in web browsers or file explorers.
- Page Back Button: Navigates backward in web browsers or file explorers.
Image: Labeled diagram of the PERIMICE-719 buttons for easy identification.
DPI Adjustment
Press the DPI Switch button (located near the scroll wheel) to cycle through three sensitivity levels: 800, 1200, and 1600 DPI. This allows you to adjust the cursor speed to your preference for different tasks.
Quiet Click Buttons
The left and right mouse buttons are designed for quiet operation, reducing click noise. Note that the scroll wheel and back/forward buttons do not feature silent clicks.
Image: The PERIMICE-719 features silent left and right click buttons for a quieter work environment.
Compatibility
The PERIMICE-719 is compatible with the following operating systems:
- Windows 7, 8, 10, and 11
- macOS 10.12 or later (Note: Back/forward buttons are not supported on macOS)
- Android 4.3 or later
Maintenance
Battery Replacement
When the mouse performance degrades or stops responding, it is likely time to replace the batteries. Open the battery compartment on the underside of the mouse, remove the old AAA batteries, and insert new ones, ensuring correct polarity. Close the compartment securely.
Cleaning
To maintain optimal performance, periodically clean your mouse. Use a soft, dry cloth to wipe the exterior. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the mouse. Avoid abrasive cleaners or solvents.
Troubleshooting
- Mouse Not Responding:
- Ensure the mouse is switched ON.
- Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
- Ensure the USB receiver is securely plugged into a working USB port on your computer. Try a different USB port.
- If the signal was interrupted, try the binding process described in the Setup Instructions.
- Irregular Cursor Movement:
- Clean the optical sensor on the underside of the mouse.
- Ensure you are using the mouse on a suitable surface. Avoid highly reflective or transparent surfaces.
- Adjust the DPI setting using the DPI switch to see if a different sensitivity improves tracking.
- Buttons Not Functioning:
- For back/forward buttons on macOS, note that they are not supported.
- Ensure the mouse is properly connected and has power.
Specifications
| Feature | Detail |
|---|---|
| Model Number | PERIMICE-719 |
| Product Dimensions | 4.1 x 2.61 x 2.26 inches |
| Item Weight | 3.52 ounces |
| Connectivity Technology | 2.4 GHz Wireless (USB Receiver) |
| Operating Range | Up to 30 ft (approx. 10 m) |
| Movement Detection | Optical |
| DPI Settings | 800 / 1200 / 1600 |
| Number of Buttons | 6 (Left, Right, Scroll, DPI, Page Forward, Page Back) |
| Power Source | 2 x AAA Batteries (not included) |
| Color | Black |
Warranty and Support
Warranty Information
The Perixx PERIMICE-719 is backed by a 12-month limited warranty. Please refer to the official Perixx website for detailed warranty terms and conditions.
Customer Support
For technical assistance, troubleshooting, or further inquiries, please visit the Perixx official website or contact their customer support team. Contact information can typically be found on the Perixx website or in the included user manual.
