Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Z-Lite 554PHB-ORB Outdoor Post Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
WARNING: Risk of electric shock. Turn off power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances.
- This fixture is designed for outdoor use and is water-resistant.
- The product is UL Listed, indicating compliance with safety standards.
- Do not exceed the maximum wattage specified for the bulb.
- Wear safety glasses and gloves during installation.
Package Contents
Verify that all components are present before beginning installation:
- 1 x Z-Lite 554PHB-ORB Outdoor Post Light Fixture
- Installation Hardware (screws, wire nuts, etc. - specific items may vary, refer to packaging)
- Instruction Manual (this document)
Figure 1: Z-Lite 554PHB-ORB Outdoor Post Light. This image displays the oil-rubbed bronze finish, the sturdy frame structure, and the clear seedy glass panels that enclose the single light bulb. The fixture is designed to be mounted on a post for outdoor illumination.
Specifications
| Model Number | 554PHB-ORB |
| Brand | Z-Lite |
| Material | Aluminum frame, Glass shade |
| Finish | Oil Rubbed Bronze |
| Dimensions (L x W x H) | 1 x 11 x 16.25 inches |
| Item Weight | 6.82 pounds |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Maximum Wattage | 100 Watts |
| Bulb Base | E26 Medium |
| Light Source Type | LED compatible (bulb not included) |
| Indoor/Outdoor Usage | Outdoor |
| Water Resistance Level | Water Resistant |
| Certification | UL Listed |
Setup and Installation
This fixture requires assembly and is designed for semi-flush mount installation on an outdoor post (post not included). Professional installation is recommended.
- Turn off Power: Before starting, ensure the power supply to the installation area is turned off at the circuit breaker.
- Prepare Wiring: Carefully strip the ends of the electrical wires from the post and the fixture, exposing approximately 3/4 inch of copper wire.
- Connect Wires:
- Connect the black wire from the fixture to the black (hot) wire from the power supply using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the power supply using a wire nut.
- Connect the green or bare copper ground wire from the fixture to the ground wire from the power supply using a wire nut.
- Mount Fixture: Secure the fixture base to the outdoor post using the provided mounting hardware. Ensure the fixture is stable and level.
- Install Bulb: Insert an E26 medium base bulb (not included) into the socket. Do not exceed the maximum 100-watt rating.
- Secure Glass Panels: Carefully place and secure the clear seedy glass panels into the fixture frame.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker.
Operating Instructions
The Z-Lite 554PHB-ORB Outdoor Post Light operates via a standard electrical connection. Once installed and powered, the light can be controlled by an external switch (e.g., a wall switch or a photocell/timer if integrated into your electrical system).
- Power On/Off: Use the connected toggle switch or other control method to turn the light fixture on or off.
- Bulb Replacement: To replace the bulb, first turn off the power supply to the fixture. Allow the bulb to cool completely before carefully unscrewing the old bulb and installing a new E26 medium base bulb (max 100W).
Maintenance
Regular maintenance will help preserve the appearance and functionality of your outdoor post light.
- Cleaning: To clean the fixture, ensure power is off. Wipe the metal surfaces with a soft, damp cloth. Use a mild glass cleaner for the seedy glass panels, avoiding abrasive cleaners that could scratch the finish.
- Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. Ensure all screws and mounting hardware remain tight.
- Bulb Type: Use only E26 medium base bulbs with a maximum wattage of 100W. LED bulbs are recommended for energy efficiency and longer lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connection. Defective bulb. | Check circuit breaker. Verify all wire connections are secure (with power off). Replace bulb. |
| Light flickers. | Loose bulb. Loose wire connection. Incorrect bulb type. | Tighten bulb. Check wire connections (with power off). Ensure correct bulb type and wattage. |
| Water inside fixture. | Improper sealing during installation. Damaged glass or seals. | Ensure all seals are properly seated and screws are tightened. Inspect for cracks or damage and replace components if necessary. |
Warranty and Support
This Z-Lite product is covered by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Z-Lite customer support.
For technical assistance or further inquiries, please visit the official Z-Lite website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
