Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Xprite RZ Series G4-RYWYR 30-inch Offroad LED Rear Chase Strobe Light Bar. This versatile light bar is designed to enhance visibility and safety for various off-road vehicles, including UTVs, ATVs, Side by Sides, 4x4s, and Trophy Trucks. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Figure 1: Xprite 30-inch Offroad LED Rear Chase Strobe Light Bar. This image displays the full light bar with its sleek black housing and clear lenses, highlighting its compact design.
Product Features
- Multi-Functional Lighting: Features 5 blocks with 6 high-power LEDs per block. Functions include running lights, stop lights, turn signal lights (Blocks 1 & 5), strobe lights (Blocks 2 & 4), and a lighting/reverse light (Block 3).
- Multiple Strobe Patterns: The strobe lights offer 7 different patterns for varied signaling needs.
- Durable Construction: Lenses are made of scratch-resistant and shatterproof PC plastic. The black housing and brackets are shockproof and corrosion-resistant, ensuring over 50,000 hours of lifespan.
- Rocker Switch Control: Includes a rocker switch for easy operation. Upward position for power off, center for power on, and downward to change between 9 different strobe patterns. Strobe function can be turned off by holding the strobe pattern switch for 3 seconds.
- Adjustable Mounting: Features an upgraded bracket design (2024) that seamlessly fits 1.75''-2'' roll cages and supports 180° vertical adjustment. Native brackets also allow for angle adjustment with screw holes.
Figure 2: Diagram illustrating the various lighting functions of the Xprite LED Chase Light Bar, including running, brake, turn signal, strobe, and reverse lights.
What's in the Box
- 1 x 30 inch Strobe Chase Lightbar
- 2 x Types of Switch Controllers
Specifications
| Attribute | Value |
|---|---|
| Brand | Xprite |
| Model | RZ Series G4-RYWYR |
| Light Source Type | LED |
| Voltage | 12 Volts |
| Wattage | 30 watts |
| Auto Part Position | Rear |
| Lens Material | Polycarbonate |
| Item Dimensions | 30 x 2.5 x 2.5 inches |
| Item Weight | 4 Pounds |
| Rated Lifetime | Over 50,000 Hours |
Figure 3: Visual representation of the product's dimensions and key specifications.
Setup & Installation
The Xprite 30-inch LED Rear Chase Strobe Light Bar is designed for straightforward installation. Follow these steps for optimal setup:
- Mounting the Light Bar: Utilize the provided adjustable clamp brackets to securely attach the light bar to your vehicle's roll cage. The brackets are compatible with 1.75''-2'' roll bars and allow for 180° vertical adjustment to achieve the desired angle.
- Wiring Connection: The light bar includes a 15ft cable. For 4-door models, an extension cable (sold separately) may be required. Connect the wiring harness according to the diagram below. Ensure all connections are secure and properly insulated.
- Rocker Switch Installation: Install the rocker switch in a convenient location on your dashboard. This switch provides easy control over the light bar's functions.
Figure 4: Illustration of the easy installation process using clamp brackets for 1.75"-2" roll bars, demonstrating 180° vertical adjustment.
Figure 5: Wiring diagram showing connections for the rocker switch, in-line switch, reverse, left turn signal, right turn signal, and brake light.
Figure 6: Close-up of the rocker switch, indicating its function for controlling the rear strobe light.
Video 1: Official Xprite video demonstrating the features and wiring of the 30-inch Offroad Rear Chase LED Strobe Light Bar. This video provides a visual guide to the product's capabilities and installation process.
Operating Instructions
The Xprite LED Rear Chase Strobe Light Bar offers multiple lighting modes controlled via the included rocker switch:
- Power On/Off: Push the rocker switch to the center position to turn the light bar on. Push it to the upward position to turn it off.
- Strobe Pattern Selection: With the light bar powered on, push the rocker switch to the downward position to cycle through the 9 different strobe patterns.
- Disable Strobe Function: To turn off the strobe patterns while keeping other functions active, hold the strobe pattern switch (downward position) for 3 seconds.
- Brake Light: When wired correctly, the red lights will illuminate when the vehicle's brakes are applied.
- Reverse Light: When wired correctly, the white light in Block 3 will illuminate when the vehicle is in reverse.
- Turn Signals: When wired correctly, the amber lights in Blocks 1 and 5 will flash corresponding to the vehicle's left or right turn signal activation.
Maintenance
To ensure the longevity and optimal performance of your Xprite LED Rear Chase Strobe Light Bar, follow these maintenance guidelines:
- Cleaning: Regularly clean the polycarbonate lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens.
- Inspection: Periodically inspect the wiring connections for any signs of wear, corrosion, or loose connections. Ensure the mounting brackets are secure.
- Water Resistance: The light bar features an IP65/IP67 waterproof rating, protecting it from dust and water ingress. However, avoid high-pressure washing directly onto the light bar, especially at close range.
Figure 7: Image highlighting the weatherproof features of the light bar, including its sealed housing and protection from outside elements.
Troubleshooting
If you encounter issues with your light bar, refer to the following common troubleshooting steps:
- Light Bar Not Functioning: Check all wiring connections for proper contact and ensure the power source is active. Verify that the rocker switch is in the 'on' position.
- Incorrect Light Function: Double-check the wiring diagram to ensure each wire (brake, turn signal, reverse) is connected to the correct vehicle circuit.
- Condensation Inside Lens: While the product is designed to be waterproof, extreme temperature changes can sometimes cause minor condensation. This usually dissipates on its own. If persistent or excessive, inspect the seals for damage.
- Interference with Radios: Some LED lights may cause minor interference with two-way radios. Ensure proper grounding and consider adding ferrite beads to power lines if interference is significant.
Warranty & Support
This Xprite product comes with a 1-Year Manufacturer Warranty. For warranty claims, technical support, or any questions regarding your product, please contact Xprite customer service through their official channels or the retailer where the product was purchased.
