1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Lepro 11-inch 24W LED Flush Mount Ceiling Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not modify the fixture. Any modifications may void the warranty and create a safety hazard.
- This fixture is rated IP54 for water and dust resistance, making it suitable for damp locations like bathrooms. However, it is not submersible.
- This light fixture is NOT DIMMABLE. Do not connect to a dimmer switch.
3. What's in the Box
Verify that all components are present before beginning installation:
- Lepro 11-inch LED Flush Mount Ceiling Light
- Mounting Hardware (screws, wall anchors)
Image: The Lepro 11-inch LED Flush Mount Ceiling Light with its included mounting bracket and screws.
4. Product Overview and Specifications
Key Features:
- IP54 Water Resistant and Dust Proof: Sealed design protects against splashing water and dust, suitable for bathrooms and damp locations.
- Slim Design and Long Lifespan: Blends seamlessly with any interior style, ideal for low or sloped ceilings. Integrated LED lights are rated for over 20,000 hours of use.
- 5000 Kelvin Daylight White Light: Provides a cool, crisp, natural light feel, suitable for various rooms.
- Energy Efficient: 24 watts, equivalent to a 200-watt incandescent lamp, saving up to 88% on energy.
- High Illumination and Color Rendering: 2400 lumens, illuminating 15-20 square meters (150-220 square feet). CRI > 80 ensures accurate color representation.
- Versatile Application: Suitable for bedroom, kitchen, bathroom, porch, balcony, laundry room, entryway, foyer, lobby, corridor, dining hall, closet, utility room, or any other indoor/outdoor area.
- Non-Dimmable: This fixture is not compatible with dimmer switches.
Technical Specifications:
| Specification | Value |
|---|---|
| Brand | Lepro |
| Model Name | Lepro 11 inch Flush Mount LED Ceiling Light |
| Model Number | EAN1500035-DW-EU |
| Size | 11-inch (28cm diameter, 1.97" height) |
| Color | Daylight White |
| Material | Plastic, Polycarbonate |
| Wattage | 24 Watts |
| Light Output | 2400 Lumens |
| Color Temperature | 5000 Kelvin |
| Color Rendering Index (CRI) | >80 |
| Water Resistance Level | IP54 (Waterproof) |
| Installation Type | Flush Mount |
| Power Source | AC |
| Voltage | 240 Volts |
| Lifespan | >20,000 hours |
| Switch Type | Push Button (external switch, not included) |
| Recommended Uses | Kitchen, Bathroom, Porch, Laundry Room, Basement, Hallway |
Image: Size comparison and illumination range for different wattage models.
5. Setup and Installation
Important: Ensure power is turned OFF at the circuit breaker before starting installation.
Installation Video Guide:
Video: Official Lepro installation instructions for ceiling lights.
Step-by-Step Installation:
- Step 1: Remove the Mounting Bracket. Gently press the bracket lock to detach the mounting bracket from the light fixture.
- Step 2: Measure Hole Spacing. Use the mounting bracket to mark the desired drill points on your ceiling. Ensure the spacing is appropriate for your ceiling type (wooden, cement, or junction box).
- Step 3: Install Mounting Bracket.
- For Wooden Ceiling: Secure the bracket directly with screws.
- For Cement Ceiling: Drill two holes, insert wall anchors, then secure the bracket with screws.
- For Junction Box: Align the bracket with the junction box and secure it using the provided screws.
- Step 4: Paste Anti-Scratch Pads. Apply the provided anti-scratch pads to the back of the lamp body to protect the ceiling surface.
- Step 5: Connect the Wires. Open the waterproof wire compartment on the back of the fixture. Insert the live (L) and neutral (N) wires from your ceiling into the corresponding electrical connections. Ensure a secure connection.
- Step 6: Push in the Ceiling Light. Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place.
Image: Visual guide for the 6-step installation process.
6. Operating Instructions
Once installed, restore power at the circuit breaker. Operate the light using your standard wall switch. This fixture provides a consistent 5000K Daylight White light and is not dimmable.
7. Maintenance
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: This fixture uses integrated LED lights and does not require bulb replacement. The LEDs are designed to last over 20,000 hours.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connection. Faulty wall switch. | Check circuit breaker. Ensure wires are securely connected (power off first). Test the wall switch. |
| Light flickers. | Loose wire connection. Incompatible dimmer switch. | Check wire connections (power off first). This fixture is non-dimmable; ensure it's not connected to a dimmer. |
| Light is too dim. | Incorrect room size for light output. | Ensure the light's illumination range (15-20 sq. meters) is suitable for your room. |
9. Warranty and Support
This Lepro LED Flush Mount Ceiling Light comes with a Limited Warranty. For specific warranty terms, conditions, and to register your product, please visit the official Lepro website or contact their customer support.
For technical support or further assistance, please contact Lepro customer service:
- Website: www.lepro.com (or refer to product packaging for specific regional contact information)
