1. Introduction
Thank you for choosing the SoBuy OGS28-SCHX2 Outdoor Rocking Lounger. This manual provides essential information for the safe assembly, proper operation, and effective maintenance of your new loungers. Please read these instructions carefully before use and retain them for future reference.
2. Safety Instructions
- Read all instructions before assembly and use.
- Ensure all components are securely fastened before sitting on the lounger.
- Do not exceed the maximum load capacity of 120 kg (264 lbs) per lounger.
- Use the loungers on a stable and level surface to prevent tipping.
- Keep hands and feet clear of moving parts during rocking motion.
- Store the product indoors when not in use to protect the rust-protective coating and extend its lifespan.
- Keep away from open flames or excessive heat sources.
3. Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact SoBuy customer support.
- 2 x Rocking Lounger Frames
- 2 x Teslin Fabric Seats with Headrests
- Assembly Tools
- Screws and other Fasteners
- Detailed Assembly Instructions (separate document)
4. Setup and Assembly
Assembly is required for this product. Please refer to the separate detailed assembly instructions included in your package for step-by-step guidance. Ensure you have adequate space and all components before starting.
Figure 4.1: Product dimensions and key components for assembly. The lounger measures approximately 150 cm in length, 63 cm in width, and 87 cm in height.
Key Assembly Tips:
- Lay out all parts on a clean, soft surface to prevent scratches.
- Do not fully tighten screws until all components are loosely assembled. This allows for easier alignment.
- Ensure the Teslin fabric is correctly oriented and stretched before securing.
- Confirm all fasteners are tightened securely once assembly is complete.
5. Operating Instructions
The SoBuy OGS28-SCHX2 rocking lounger is designed for relaxation and sunbathing. It features a comfortable rocking motion and an adjustable headrest.
Figure 5.1: The lounger provides a gentle rocking motion and is stable on different outdoor surfaces.
5.1 Rocking Function
Gently push off with your feet to initiate the rocking motion. The design allows for a smooth and comfortable sway. Ensure the lounger is on a flat, stable surface for optimal rocking and safety.
5.2 Adjustable Headrest
Figure 5.2: The headrest can be adjusted for personalized comfort, and a convenient side pocket is included for small items.
The integrated headrest can be adjusted up or down along the backrest to suit your comfort preference. Simply slide it to the desired position.
5.3 Side Storage Pocket
Each lounger is equipped with a convenient side pocket, ideal for holding small items such as a book, phone, or sunglasses while you relax.
6. Maintenance and Care
Proper care will ensure the longevity and appearance of your SoBuy rocking loungers.
- Cleaning: For general cleaning, wipe the frame with a damp cloth and mild soap. For the Teslin fabric, spot clean with a soft brush and mild detergent. Rinse thoroughly and allow to air dry completely.
- Rust Prevention: The steel frame is powder-coated for rust resistance. To maintain this protection, avoid prolonged exposure to moisture. Store the loungers indoors or cover them with a protective cover when not in use, especially during inclement weather or off-season.
- Inspection: Periodically check all screws and fasteners to ensure they remain tight. Tighten if necessary.
- Storage: When storing, ensure the loungers are clean and dry. Store in a cool, dry place away from direct sunlight and extreme temperatures.
Figure 6.1: Inspect the rocking base and frame regularly for any signs of wear or loose connections.
7. Troubleshooting
If you encounter any issues with your rocking loungers, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lounger feels unstable or wobbly. | Uneven assembly; loose fasteners; uneven ground. | Check all screws and tighten them. Ensure the lounger is on a flat, level surface. Re-assemble if necessary, ensuring all parts are aligned. |
| Difficulty with rocking motion. | Obstruction under the rocking base; uneven surface. | Clear any debris from under the rocking base. Move the lounger to a smooth, level surface. |
| Signs of rust on the frame. | Prolonged exposure to moisture; damage to powder coating. | Clean affected area and apply rust-inhibiting paint if necessary. Ensure proper indoor storage or use a protective cover when not in use. |
8. Specifications
- Model: OGS28-SCHX2
- Brand: SoBuy
- Color: Black
- Material: Powder-coated Steel (Frame), Teslin Fabric (Seat), Foam (Headrest Filling)
- Product Dimensions (L x W x H): 150 cm x 63 cm x 87 cm (59.1 in x 24.8 in x 34.3 in)
- Item Weight: 12.5 kg (27.5 lbs) per lounger
- Maximum Load Capacity: 120 kg (264 lbs) per lounger
- Assembly Required: Yes
- Outdoor Use: Yes
- Care Instructions: Spot cleaning to protect against moisture and scratches. Store indoors when not in use.
- GTIN (Global Trade Item Number): 04251388622933
9. Warranty and Support
SoBuy products are manufactured to high-quality standards. For any questions regarding your product, assembly assistance, or to report missing/damaged parts, please contact SoBuy customer support. Specific warranty details may vary by region and purchase point; please refer to your purchase documentation or the retailer's policy for more information.