Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your eRapta ERT01 HD Backup Camera. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Safety Information
- Ensure the vehicle's power is off before beginning installation to prevent electrical shorts or injury.
- Verify that the camera is compatible with your vehicle's video signal type (CVBS only).
- Route cables carefully to avoid interference with vehicle moving parts or sharp edges.
- Do not obstruct the driver's view or vehicle controls with the camera or wiring.
- Professional installation is recommended if you are unfamiliar with vehicle electrical systems.
Package Contents
Verify that all items listed below are included in your package:
- 1x eRapta ERT01 Backup Camera
- 2x Metal Brackets (one license plate bracket, one small bracket)
- 1x AV Cable (26ft RCA video cable)
- 1x Power Cable
- 1x Installation Manual (this document)
Image: Contents of the eRapta ERT01 Backup Camera package, showing the camera, power cable, video cable, and two mounting brackets.
Setup and Installation
The eRapta ERT01 backup camera is designed for universal compatibility with 12-24V DC power systems and displays supporting CVBS signal input. Ensure your vehicle's display unit is compatible before proceeding.
1. Mounting the Camera
The camera comes with two bracket options for flexible installation:
- License Plate Bracket: Mount the camera directly behind your vehicle's license plate. This provides a discreet and secure installation.
- Small Bracket: Use this bracket for alternative mounting locations such as the car trunk, side, or mirror, depending on your vehicle's design and desired viewing angle.
Image: The eRapta ERT01 camera shown with both the license plate mounting bracket and a smaller, alternative bracket for versatile installation.
2. Wiring Connections
- Power Connection: Connect the camera's power cable (red and black wires) to your vehicle's reversing light circuit. The red wire connects to the positive (+) terminal of the reversing light, and the black wire connects to a ground (-) point on the vehicle chassis. This ensures the camera powers on automatically when the vehicle is in reverse.
- Video Connection: Connect the yellow RCA connector of the camera's video cable to the video input (typically labeled "CAM IN" or "REVERSE IN") on your car radio, screen, or monitor. The 26ft AV cable provides ample length for most vehicle types.
Important Note: The eRapta ERT01 backup camera is compatible only with displays that support the CVBS signal type. Please confirm your vehicle's display compatibility before installation. Incompatible signal types may result in no image or a distorted image.
3. Adjusting the Camera Angle
The camera features an adjustable angle to optimize your rear view. After mounting, you can adjust the camera up or down by approximately 45 degrees (15 degrees upward, 30 degrees downward) to achieve the desired field of view.
Image: Illustration of the eRapta ERT01 camera's adjustable mounting, allowing for 15 degrees upward and 30 degrees downward tilt for a total of 45 degrees of adjustment.
Operating Instructions
1. Automatic Activation
Once properly installed and wired to the reversing light, the camera will automatically activate and display the rear view on your connected monitor when the vehicle is shifted into reverse gear.
2. Viewing Angle
The camera provides a 149-degree wide viewing angle, designed to minimize blind spots and enhance safety during reversing maneuvers.
Image: Comparison of viewing angles, highlighting the eRapta ERT01's 149-degree angle as optimal, avoiding the distortion of 170 degrees and the narrowness of 120 degrees.
3. Night Vision
The camera is equipped with 10 LED lights that automatically illuminate in low-light conditions, providing clear night vision for safe reversing in the dark.
Image: A street scene at night, illustrating the clear image provided by the eRapta ERT01 camera's night vision capabilities, enhanced by 10 LED lights.
4. Image Guidelines
Some display units may offer options to display or remove parking guidelines. Refer to your display unit's manual for specific instructions on adjusting these settings. The camera itself may also have a wire loop that can be cut to toggle guidelines or mirror image functionality.
Image: Depicts the ability to switch between mirror and normal images, and to activate or deactivate parking guidelines, often controlled by cutting a specific wire loop.
Maintenance
- Cleaning: Regularly clean the camera lens with a soft, damp cloth to ensure a clear image. Avoid abrasive cleaners.
- Waterproof Rating: The camera has an IP69K waterproof rating, meaning it is highly resistant to dust and high-pressure, high-temperature water jets. However, avoid directing powerful water streams directly at the camera for extended periods.
Image: The eRapta ERT01 camera submerged in water, illustrating its IP69K waterproof and dustproof capabilities, suitable for all weather conditions.
- Cable Inspection: Periodically check all cable connections for signs of wear, corrosion, or damage. Secure any loose connections.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on display. | Incorrect wiring; loose connections; incompatible display signal (not CVBS); faulty camera/cable. | Check power and video cable connections. Ensure display supports CVBS. Test camera with another compatible display if possible. |
| Image is distorted or flickering. | Poor video signal connection; electrical interference; incompatible display resolution. | Secure video cable connections. Ensure proper grounding. Check for nearby electrical interference. |
| Poor night vision. | Dirty lens; insufficient ambient light; LED lights not functioning. | Clean the camera lens. Ensure reversing lights are functional. |
| Camera not activating in reverse. | Power cable not connected to reversing light; reversing light fuse blown. | Verify power connection to reversing light. Check vehicle's reversing light fuse. |
Specifications
- Model: ERT01
- Power Input: 12-24V DC
- Video Signal: CVBS (Composite Video Broadcast Signal)
- Viewing Angle: 149 degrees
- Lens: 6-glass lens, F/1.5 aperture
- Night Vision: 10 LED lights
- Waterproof Rating: IP69K
- Dimensions: 9.4 x 1 x 1.3 inches (Product)
- Weight: 2.88 ounces
- Connector Type: RCA
- Optical Sensor Technology: CMOS
Image: Close-up view of the camera lens, emphasizing the F/1.5 aperture and 6-glass lens construction designed to capture more light and produce clearer images.
Warranty and Support
The eRapta ERT01 Backup Camera comes with a Two Year Warranty and Lifetime Technical Support.
For any questions, technical assistance, or warranty claims, please contact eRapta support. Refer to the contact information provided with your purchase or visit the official eRapta website for support details.
eRapta support department is dedicated to assisting you with any consultation regarding your product.
