SVBONY SV101 54-inch Aluminum Alloy Travel Tripod Instruction Manual

Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of your SVBONY SV101 54-inch Aluminum Alloy Travel Tripod. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Safety Information

Warning: Do not look directly into the sun through any optical device mounted on this tripod, as this can cause severe and permanent eye damage.

Always ensure your device is securely mounted to the tripod head before releasing your grip. Avoid placing the tripod on unstable or uneven surfaces. Do not exceed the maximum load capacity of 2.5 kg (5.5 lbs).

Product Components

The SVBONY SV101 tripod is constructed from aluminum alloy and ABS plastic, designed for durability and portability. Familiarize yourself with the main components:

Pan Head: Features a 3-way flexible pan head with tilt and swivel motion, and a quick-release plate.
Quick Release Plate: For easy attachment and detachment of devices.
Pan Handle: For smooth adjustments of the pan head.
Bubble View Levels: Integrated for precise leveling.
Center Column: Extends for additional height.
Leg Sections: Four-section telescopic legs with quick-release locks.
Rubber Feet: Anti-skid rubber feet for stability on various surfaces.
Leg Braces: Provide additional stability to the tripod legs.

Diagram of SVBONY SV101 tripod components with callouts — **Figure 1:** Exploded view showing the main components of the SVBONY SV101 tripod, including the pan head, quick release plate, pan handle, leg locks, and rubber feet.

Setup Instructions

Unfolding the Tripod: Gently spread the tripod legs outwards until they are fully extended and stable.
Adjusting Leg Height: Unlock the quick-release leg locks on each leg section. Extend the legs to the desired height. Securely close the quick-release locks to ensure stability. Repeat for all leg sections.

Close-up of tripod leg with quick-release locks — **Figure 2:** Detail of the quick-release leg locks, which allow for rapid adjustment of the tripod's height.

Extending the Center Column: If additional height is needed, loosen the center column locking knob, raise the center column to the desired position, and then tighten the knob firmly.
Attaching Your Device:
- Remove the quick-release plate from the pan head by lifting the safety latch and sliding it out.
- Attach your camera, spotting scope, or camcorder to the quick-release plate using the standard 1/4-inch screw mount. Ensure it is tightened securely.
- Slide the quick-release plate with your device back into the pan head until it clicks into place. Verify that it is locked and secure.

SVBONY SV101 tripod fully set up outdoors — **Figure 3:** The SVBONY SV101 tripod fully extended and ready for use in an outdoor setting.

Operating Instructions

Leveling the Tripod: Use the built-in bubble view levels on the pan head to ensure the tripod is perfectly level before use. Adjust the leg heights as necessary.

Close-up of the spirit level design on the tripod head — **Figure 4:** The integrated spirit level on the tripod head assists in achieving a perfectly level setup for accurate imaging or viewing.

Adjusting Pan and Tilt: Loosen the pan handle to adjust the horizontal (pan) and vertical (tilt) angles of your device. The 3-way pan head allows for 360-degree rotation and 90-degree vertical shooting. Tighten the pan handle once the desired position is achieved.

Close-up of the pan head with pan handle indicating rotational movement — **Figure 5:** The pan handle allows for smooth and precise adjustments of the camera or scope's orientation.

Maintenance

Cleaning: Wipe the tripod with a soft, dry cloth after each use to remove dust and dirt. For stubborn grime, use a slightly damp cloth and mild soap, then dry thoroughly.
Storage: When not in use, fold the tripod to its compact size and store it in the provided carrying bag in a dry, cool place.

Person carrying the folded SVBONY SV101 tripod in its carrying bag — **Figure 6:** The tripod can be easily transported in its included carrying bag, demonstrating its portability.

Lubrication: Moving parts generally do not require lubrication. If any part feels stiff, consult customer support.
Inspection: Periodically check all screws, knobs, and leg locks to ensure they are tight and functioning correctly.

Troubleshooting

Tripod is unstable: Ensure all leg sections are fully extended and their quick-release locks are securely fastened. Verify the center column locking knob is tight. Check that the tripod is on a flat, stable surface.
Device wobbles on the head: Confirm the quick-release plate is properly seated and locked into the pan head. Ensure the device is tightly screwed onto the quick-release plate.
Pan/tilt movement is stiff: Loosen the pan handle slightly. If the issue persists, check for any obstructions or debris.

Specifications

Feature	Specification
Product Dimensions	14.94 x 6.51 x 3.51 inches (folded)
Item Weight	1.72 pounds
Maximum Height	138 Centimeters (approx. 54 inches)
Minimum Height (Folded Length)	45 Centimeters (approx. 17 inches)
Weight Limit	2.5 kg (5.5 Pounds)
Material	Aluminum Alloy, ABS Plastic, Rubber
Leg Sections	4 sections
Tripod Head Type	3-Way Pan Head
Compatible Devices	Digital Cameras, Camcorders, Spotting Scopes, Binoculars, Telescopes (with 1/4" screw mount)
Model Number	FAUF9140A

Warranty and Support

For warranty information or technical support, please refer to the SVBONY official website or contact your retailer. Keep your purchase receipt for warranty claims.

SVBONY FAUF9140A