1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your Maylit RGB TV LED Backlight Strip. This USB-powered LED strip is designed to enhance your viewing experience by providing bias lighting for 40-60 inch televisions, reducing eye strain and adding ambient light to your room.
2. What's in the Box
- 8.2ft RGB LED Strip Light
- USB Power Cable with Integrated Controller
- IR Remote Control (Batteries included)
- Fixing Buckles (for additional securing)
Image: Components included in the Maylit TV LED Backlight kit.
3. Specifications
| Model Number | USB TV Bias Light for 40-60 |
| LED Strip Length | 8.2 feet (2.5 meters) |
| Recommended TV Size | 40-60 inches |
| Power Source | USB 5V (TV USB port) |
| Light Type | RGB 5050 LEDs |
| Number of Light Sources | 60 |
| Wattage | 2.5 watts |
| Control Method | IR Remote Control |
| Remote Control Distance | 8-10 meters |
| Special Features | 16 Colors, 4 Dynamic Modes, Dimmable, 180-degree foldable |
Image: Detailed lighting facts for the LED strip.
4. Setup Instructions
- Clean the Surface: Ensure the back of your TV is clean and dry for optimal adhesive performance.
- Plan Placement: Before removing the adhesive backing, temporarily position the LED strip around the back edges of your TV to determine the best layout. The strip is 180-degree foldable for corners.
- Attach the LED Strip: Peel off the adhesive backing and carefully press the LED strip onto the back of your TV. Use the provided fixing buckles for additional security, especially at corners or if the adhesive needs reinforcement.
- Connect Power: Plug the USB connector into a 5V USB port on your TV. The product is powered by the TV's USB 5V interface. Ensure the USB interface current is 1A for proper operation.
- Test Lights: Once connected, the lights should turn on. Use the IR remote control to test different colors and modes.
Image: Visual guide for installing the LED strip and connecting to the TV's USB port.
Image: Example of the LED backlight effect behind a TV.
Video: An overview of the Maylit TV LED Backlight, demonstrating its features and installation process for 40-60 inch TVs.
5. Operating Instructions
The Maylit RGB TV LED Backlight is controlled using the included IR remote control.
5.1 Remote Control Functions
- ON/OFF: Power the lights on or off.
- Color Selection: Choose from 16 static colors.
- Brightness Adjustment: Increase or decrease the brightness of the selected color.
- Dynamic Modes: Select from 4 dynamic modes (Flash, Strobe, Fade, Smooth) for various lighting effects.
Image: The IR remote control with buttons for color selection, dimming, and dynamic modes.
Image: Demonstration of the Flash, Strobe, Fade, and Smooth dynamic lighting modes.
Video: A demonstration of the ambiance created by the TV LED lights, showcasing various color changes and effects.
6. Maintenance
- Cleaning: Gently wipe the LED strip with a dry, soft cloth if dust accumulates. Do not use liquid cleaners.
- Adhesive Check: Periodically check the adhesive to ensure the strip remains securely attached. Reapply fixing buckles if necessary.
- Storage: If removing the strip for extended periods, carefully peel it off and store it in a cool, dry place.
7. Troubleshooting
- Lights not turning on:
- Ensure the USB cable is securely plugged into a functional 5V USB port on your TV.
- Verify the TV's USB port provides at least 1A current. Some older TV USB ports may not provide sufficient power.
- Check the remote control battery.
- Remote control not working:
- Ensure there are no obstructions between the remote and the IR receiver on the USB cable.
- Replace the remote control battery if necessary.
- Lights flickering or inconsistent colors:
- This may indicate insufficient power. Try plugging the USB into a different TV USB port or a dedicated 5V/1A (or higher) USB wall adapter.
- Ensure the connections between the LED strip and the USB controller are secure.
8. Safety Information
- This product is designed for indoor use only.
- Do not cut the LED strip unless explicitly instructed by the manufacturer, as this may damage the product and void the warranty.
- Keep out of reach of children.
- Avoid exposing the LED strip to excessive heat or moisture.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Maylit customer service directly. Keep your purchase receipt for warranty claims.
