Introduction
Thank you for purchasing the Memorex MC0952 Projection Clock Radio. This device combines a digital clock, an FM radio, and a unique time projection feature, allowing you to easily view the time on your wall or ceiling. Please read this manual carefully before operating the unit and retain it for future reference.
Safety Information
To ensure safe operation and prevent damage, please observe the following precautions:
- Do not expose the unit to rain or moisture.
- Do not place the unit near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this unit during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.
- Ensure proper ventilation and do not block any ventilation openings.
- Dispose of used batteries responsibly.
Package Contents
- Memorex MC0952 Projection Clock Radio Unit
- AC Power Adapter
- User Manual
Product Overview
Figure 1: Front view of the Memorex MC0952 Projection Clock Radio. The unit is black with silver accents on the sides, featuring a large, dark LED display area and the "memorex" logo in white on the top left.
The Memorex MC0952 features a large 1.8-inch LED display for clear time visibility. It includes a built-in projector to cast the time onto a surface, and an FM radio tuner. Controls are located on the top and rear of the unit.
Key Components:
- LED Display: Shows current time and radio frequency.
- Projection Lens: Projects time onto a wall or ceiling.
- Function Buttons: For setting time, alarm, radio tuning, and projection.
- Dimmer Switch: Adjusts display brightness (High, Medium, Low).
- FM Antenna: For radio reception.
- Power Input: For AC adapter connection.
- Battery Compartment: For backup battery (battery not included).
Setup
- Power Connection: Connect the supplied AC power adapter to the DC input jack on the back of the unit, then plug the adapter into a standard wall outlet. The display will light up.
- Backup Battery (Optional): For time and alarm settings retention during power outages, insert a CR2032 lithium battery (not included) into the battery compartment on the bottom of the unit. Ensure correct polarity (+/-).
- Antenna Setup: Extend the FM wire antenna fully for optimal radio reception. Position it away from other electronic devices.
Operating Instructions
Setting the Time
- Press and hold the TIME SET button until the hour digits begin to flash.
- Press the HOUR button repeatedly to adjust the hour. Note the PM indicator if setting a PM time.
- Press the MINUTE button repeatedly to adjust the minute.
- Press the TIME SET button again to confirm and exit time setting mode.
Radio Operation
- Press the RADIO ON/OFF button to turn on the FM radio. The current frequency will be displayed.
- Press the TUNE+ or TUNE- buttons to manually adjust the frequency.
- Press and hold TUNE+ or TUNE- to automatically scan for the next available station.
- Adjust the volume using the VOLUME+ or VOLUME- buttons.
- Press the RADIO ON/OFF button again to turn off the radio.
Projection Feature
- Press the PROJECTION ON/OFF button to activate the time projection. The time will be projected onto the ceiling or wall.
- Rotate the projection lens to adjust the focus of the projected time.
- Adjust the angle of the projection arm to change the position of the projected time.
- Press the PROJECTION ON/OFF button again to turn off the projection.
Display Brightness
Use the DIMMER switch located on the unit to select one of three brightness levels for the LED display: High, Medium, or Low.
Maintenance
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Lens Cleaning: Gently wipe the projection lens with a soft, lint-free cloth. Avoid scratching the lens.
- Battery Replacement: If using a backup battery, replace it annually or when the display shows signs of power loss during outages.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Power adapter not connected or outlet is faulty. | Ensure AC adapter is securely plugged into the unit and a working wall outlet. |
| Time display is dim or unreadable. | Dimmer switch set to low or unit is in a brightly lit room. | Adjust the DIMMER switch to a higher setting. Move the unit to a less brightly lit area if necessary. |
| Projected time is blurry. | Projection lens is out of focus. | Rotate the projection lens to adjust the focus until the time is clear. |
| Poor radio reception. | FM antenna not extended or interference. | Fully extend the FM wire antenna and reposition it for better reception. Move away from other electronic devices. |
Specifications
- Model: MC0952
- Brand: Memorex
- Display Type: 1.8-inch LED Digital
- Power Source: AC Power Adapter (included), CR2032 Lithium Battery (backup, not included)
- Radio Tuner: FM
- Dimensions: 7 x 3 x 4.5 inches (L x W x H)
- Weight: Approximately 11.2 ounces
- Color: Black
- Material: Plastic
Warranty and Support
This product is covered by a limited warranty from Memorex. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Memorex support website. Please retain your proof of purchase for warranty claims.
Note: Information regarding specific warranty duration or contact details is not provided in the product data. Please refer to the manufacturer's official resources.