Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Lebenoid EBE310101 France/Schuko 16 Amp White travel adapter. Please read this manual thoroughly before using the product and retain it for future reference.

The Lebenoid EBE310101 is designed to convert a French plug (Type E) to a German/Schuko socket (Type F), allowing devices with French plugs to be used in countries with Schuko outlets. It supports a maximum current of 16 Amperes.

2. Safety Information

• For indoor use only. Do not expose the adapter to moisture or extreme temperatures.
• Do not exceed the maximum rated current of 16A or voltage of 230V. Overloading can cause damage to the adapter, connected devices, or lead to fire hazards.
• Ensure the device you are connecting is compatible with the voltage of the power outlet. This adapter only changes the plug type, not the voltage.
• Do not disassemble or modify the adapter. Any unauthorized modifications may void the warranty and pose safety risks.
• Keep out of reach of children.
• If the adapter appears damaged, do not use it. Contact customer support for assistance.
• Always insert plugs fully and firmly. A loose connection can generate heat.

3. Product Overview

The Lebenoid EBE310101 adapter is a compact and robust device designed for international power conversion. Below are images illustrating its key features and dimensions.

Figure 3.1: Front view of the adapter, featuring the Schuko (Type F) socket. This is where you will plug in your device that has a French (Type E) plug.

Figure 3.2: Side view of the adapter, displaying the two round pins (4.8mm) and the grounding clips designed to fit into a standard Schuko wall outlet.

Figure 3.3: The adapter shown in hand, providing a visual reference for its compact and portable dimensions (approximately 6.3 x 4.3 x 4.3 cm).

Figure 3.4: Compatibility chart illustrating different plug and socket types. This adapter specifically converts Type E (French) plugs to Type F (Schuko) sockets.

4. Setup and Operation

Using the Lebenoid EBE310101 adapter is straightforward. Follow these steps for proper connection:

1. Verify Compatibility: Ensure your device has a French (Type E) plug and that the wall outlet is a German/Schuko (Type F) socket. Also, confirm that your device's voltage requirements match the local power supply.
2. Insert Device Plug: Take the French (Type E) plug of your electronic device and firmly insert it into the front socket of the Lebenoid EBE310101 adapter. Ensure it is fully seated.
3. Insert Adapter into Wall Outlet: Carefully insert the adapter, with your device plugged in, into the German/Schuko (Type F) wall outlet. Push firmly until it is fully seated and secure.
4. Power On: Once securely connected, you can power on your device.

Important: Never force the adapter into an outlet or a device plug into the adapter. If it does not fit, it is likely incompatible.

5. Maintenance

The Lebenoid EBE310101 adapter requires minimal maintenance.

• Cleaning: Disconnect the adapter from the power outlet and any connected devices before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture.

6. Troubleshooting

If you experience issues not listed here or if the problem persists, please contact customer support.

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the official Schneider Electric website or contact your retailer. Keep your purchase receipt as proof of purchase.

For further assistance, please visit: Schneider Electric Official Website