OUTWATER SAMS-7-BK-BRK

Instruction Manual: 2" Black Nylon Swivel Hooded Samson Twin Wheel Caster with Brake

Model: SAMS-7-BK-BRK | Brand: OUTWATER

1. Product Overview

The OUTWATER Samson Series Twin Wheel Casters are designed for smooth and quiet mobility of furniture and equipment. This 4-pack of 2-inch diameter casters features durable black Nylon 6 wheels and hoods, suitable for various floor types including hardwood and carpet. Each caster includes a brake mechanism for secure positioning and a 5/16-18 x 1" UNC threaded stem for easy installation.

Four black twin-wheel casters with threaded stems, next to a brown cardboard box with 'OUTWATER INDUSTRIES' logo.

Figure 1.1: OUTWATER 2" Black Nylon Swivel Hooded Samson Twin Wheel Casters (4-pack) with packaging.

Close-up view of a single black twin-wheel caster, showing the brake lever and threaded stem.

Figure 1.2: Detailed view of a single caster, highlighting the brake mechanism.

2. Key Features

Two black caster wheels, one showing the inner gusset structure and the other showing the exterior, with a steel axle below.

Figure 2.1: Illustration of gusset-reinforced wheels and hardened steel axle for enhanced strength.

A black caster wheel positioned on a surface divided into three textures: carpet, tile, and wood flooring, with text 'SAFE FOR CARPET • TILE • WOOD FLOORING'.

Figure 2.2: Casters are safe for use on multiple floor types without leaving marks.

3. Specifications

AttributeValue
Wheel Diameter2 inches (50mm)
Installed Mounting Height2-5/16 inches (58.7mm)
Stem TypeUNC Threaded Stem
Stem Dimensions5/16-18 x 1 inch
Load Capacity (Static)75 lbs per wheel (300 lbs per set of 4)
Load Capacity (Dynamic)49 lbs per wheel (196 lbs per set of 4)
MaterialNylon 6, Zinc-Plated Steel
ColorBlack
Swivel Radius2-1/8 inches
ManufacturerOutwater
Model NumberSAMS-7-BK-BRK
UPC707571852884
Technical drawing showing various dimensions of the caster, including wheel diameter, installed height, and stem dimensions in millimeters and inches.

Figure 3.1: Detailed technical dimensions of the caster.

4. Setup and Installation

These casters are designed for easy, tool-free installation into compatible furniture. Ensure your furniture has a threaded receptacle that matches the 5/16-18 x 1" UNC stem. If replacing existing casters, first remove the old casters before installing the new ones.

4.1. Verifying Stem Compatibility

Before installation, it is crucial to verify that the threaded stem of the new OUTWATER caster matches the existing receptacle on your furniture. The stem diameter is measured over the threads.

Diagram illustrating how to measure the diameter of a caster stem using a measuring tape, showing side and top views. The diameter is measured over the threads (B), not the center post (A).

Figure 4.1: Guide to measuring caster stem diameter. The diameter of this caster's stem is 5/16".

4.2. Installation Steps

  1. Prepare the Furniture: If replacing old casters, carefully remove them from the furniture legs. This may involve pulling them out or unscrewing them, depending on their type.
  2. Insert New Casters: Align the threaded stem of the new OUTWATER caster with the threaded receptacle on the furniture leg.
  3. Screw into Place: Gently screw the caster into the receptacle by hand, turning clockwise until it is securely tightened. Do not overtighten.
  4. Repeat: Install all remaining casters following the same procedure.
  5. Test Stability: Once all casters are installed, gently test the stability of the furniture before applying full weight.

5. Operating Instructions

The OUTWATER Samson Twin Wheel Casters are designed for smooth and effortless movement across various surfaces.

5.1. Movement

These casters feature a 360-degree swivel action, allowing for easy maneuverability in any direction. The twin-wheel design helps distribute weight and reduces friction, making it simple to move furniture without excessive effort.

5.2. Engaging the Brake

Each caster is equipped with a brake mechanism to prevent unintended movement. To engage the brake, press down firmly on the lever located on the side of the caster until it clicks into the locked position. To disengage, lift the lever upwards.

Always ensure all casters are either fully engaged or fully disengaged to prevent uneven stress on the furniture and potential damage.

A black office table with four black twin-wheel casters installed on its legs, demonstrating their use on furniture.

Figure 5.1: Example of casters installed on a piece of furniture.

6. Maintenance

Regular maintenance will ensure the longevity and smooth operation of your OUTWATER casters.

7. Troubleshooting

If you encounter any issues with your casters, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Caster not rolling smoothlyDebris (hair, lint) caught in wheels or axle.Clean wheels and axle area thoroughly.
Caster squeaks during movementLack of lubrication in swivel mechanism.Apply a small amount of silicone-based lubricant to the swivel point.
Brake not holding furniture securelyBrake mechanism not fully engaged or worn.Ensure the brake lever is pressed down firmly until it locks. If worn, consider replacement.
Caster feels loose or wobblyThreaded stem is loose in the receptacle.Carefully tighten the threaded stem by turning the caster clockwise until snug. Do not overtighten.

8. Warranty and Support

Your OUTWATER Samson Twin Wheel Casters are backed by a commitment to quality. For specific warranty details and support, please refer to your purchase documentation or contact the seller directly.

Return Policy: This product is eligible for a refund or replacement within 30 days of purchase, as per the seller's policy.

For further assistance, you may visit the official OUTWATER Store on Amazon: OUTWATER Store

Related Documents - SAMS-7-BK-BRK

Preview Bi-Fold Barn Door Installation Manual - BF*-TM-BK and BF*-FM-BK Series
Detailed installation guide for Outwater's Bi-Fold Barn Door hardware, covering models BF*-TM-BK and BF*-FM-BK. This manual provides step-by-step instructions, lists included hardware and required tools, and details component dimensions for a successful installation.
Preview SDH-DFG- Installation Manual - Outwater Architectural Products
Comprehensive installation manual for the Outwater SDH-DFG- door floor guide. Details required tools, kit contents, available finishes, and step-by-step installation instructions for adjustable guides.
Preview Lutron Palladiom Wire-Free Shading System: Technical Specifications and Installation Guide
Comprehensive guide to the Lutron Palladiom Wire-Free Shading System, detailing features, specifications, mounting options, and installation notes for exposed motorized shades.
Preview Lutron Sivoia QS & Sivoia QS Wireless Dual Shade Sub-Bracket Kits
This document details Lutron's Sivoia QS and Sivoia QS Wireless Dual Shade Sub-Bracket Kits, including part numbers, features, and mounting options for various roller sizes and configurations.
Preview Agua VALENSO-BK Matte Black Shower Set with Hand Shower - Installation Guide
Comprehensive installation guide and specifications for the Agua VALENSO-BK matte black shower set, featuring VERA valve, VINCENT trim kit, and VINCENZO shower rail. Includes warranty and certification details.
Preview SAMSON TROVIS 5757-7 Electric Actuator Mounting and Operating Instructions
Detailed mounting and operating instructions for the SAMSON TROVIS 5757-7 Electric Actuator with Process Controller, covering installation, operation, safety, and troubleshooting for heating and cooling applications.