1. Introduction
This manual provides essential instructions for the proper use, installation, and maintenance of your De'Longhi Milk Carafe Lid. This component is designed as a replacement part for compatible De'Longhi espresso machines, ensuring optimal milk frothing performance. Please read these instructions carefully before use.
2. Product Overview
The De'Longhi Milk Carafe Lid is a crucial component for your espresso machine's automatic milk frothing system. It includes the main lid assembly, a stainless steel frothing spout, and a clear plastic intake tube.

This image displays the De'Longhi milk carafe lid, featuring a black plastic body, a stainless steel frothing spout, and a clear plastic intake tube. The lid is designed to connect to a milk reservoir and an espresso machine for automatic milk frothing.
3. Setup
- Compatibility Check: Ensure this lid is compatible with your specific De'Longhi espresso machine model. Refer to your machine's manual for part numbers if necessary.
- Attach Intake Tube: Connect the clear plastic intake tube securely to the designated port on the underside of the lid.
- Secure Lid to Carafe: Place the lid firmly onto your De'Longhi milk carafe/reservoir, ensuring a tight and secure seal.
- Connect to Machine: Attach the assembled milk carafe with the lid to your espresso machine according to your machine's instructions.
4. Operating Instructions
- Fill Carafe: Fill the milk carafe with the desired amount of fresh, cold milk. Do not overfill.
- Ensure Seal: Confirm that the lid is properly sealed on the carafe and the carafe is correctly attached to the espresso machine.
- Select Function: On your espresso machine, select the appropriate milk frothing or cappuccino/latte function.
- Adjust Settings (if applicable): If your machine allows, adjust frothing intensity or milk temperature settings.
- After Use: Once frothing is complete, carefully remove the milk carafe from the machine.
5. Maintenance
Regular cleaning is essential to maintain hygiene and optimal frothing performance.
5.1. Daily Cleaning
- Rinse Immediately: After each use, detach the lid and rinse all components (lid, frothing spout, intake tube) thoroughly with warm water.
- Disassemble: For best results, carefully detach the intake tube and frothing spout from the lid for individual rinsing.
- Remove Residue: Use a soft brush or sponge to remove any milk residue from all surfaces and internal passages.
5.2. Weekly Cleaning
- Soak Components: Soak the disassembled lid components in warm, soapy water for approximately 30 minutes.
- Thorough Rinse: Rinse all parts thoroughly under running water to remove all soap and milk residue.
- Prevent Blockages: Ensure all small openings and tubes are clear of any dried milk, which can cause blockages and affect frothing quality.
5.3. Descaling
The milk frothing system may require descaling periodically. Refer to your specific De'Longhi espresso machine's instruction manual for detailed descaling procedures and recommended descaling solutions.
6. Troubleshooting
If you encounter issues with your milk carafe lid, consider the following common solutions:
- No Froth or Poor Froth Quality:
- Ensure the milk carafe is filled with fresh, cold milk.
- Verify the lid is securely attached and sealed on the carafe.
- Check that the clear intake tube is correctly connected and free from blockages.
- Thoroughly clean all lid components, especially the frothing spout and intake tube, to remove any dried milk residue.
- Leaking from Carafe:
- Ensure the lid is correctly and firmly seated on the milk carafe.
- Inspect the lid and the carafe for any visible damage, cracks, or deformities that might compromise the seal.
If problems persist, consult your espresso machine's full instruction manual or contact De'Longhi customer support.
7. Specifications
| Brand | De'Longhi |
| Model Number | B074FXJY5X |
| Material | Plastic (Lid), Stainless Steel (Spout) |
| Dimensions (L x W x H) | 13.5 x 9 x 13.5 cm |
| Weight | 150 g |
| Special Feature | Milk Frother Component |
| Components Included | Lid, Intake Tube, Frothing Spout |
8. Warranty and Support
No specific warranty information is provided for this replacement part. For any warranty claims or detailed product support, please refer to the documentation provided with your original De'Longhi espresso machine or contact De'Longhi customer service directly. You may also contact the retailer from whom this part was purchased.
For further assistance, visit the official De'Longhi website or consult your espresso machine's comprehensive user manual.