Introduction
This manual provides essential information for the safe and effective operation, maintenance, and care of your Daisy Powerline 901 Air Rifle Kit. Please read this manual thoroughly before using the product.
Important Safety Information
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always wear appropriate eye protection when handling or operating this air rifle.
Legal Disclaimer: YOU MUST BE 18 YEARS OR OLDER TO BUY ANY AIR GUN OR AIR RIFLE IN OUR STORE. We do NOT and can NOT ship airguns or bb guns to New York City and its boroughs (Manhattan, Brooklyn, Bronx, Queens, Staten Island, these zip codes are: 100xx-104xx, 110xx, 112xx-114xx, 116xx), the city of Philadelphia, PA and Washington DC. Residents of Chicago, IL cannot buy CO2 powered rifles, pistols or revolvers directly from us. Residents of New Jersey can buy bb guns through a designated local gun store after acquiring an Airgun Permit.
Always treat every airgun as if it were loaded. Never point an airgun at anything you do not intend to shoot. Keep your finger off the trigger until ready to shoot. Be sure of your target and what is beyond it.
Package Contents
Image: The Daisy Powerline 901 Air Rifle Kit, showing the black air rifle with an attached scope, yellow safety glasses, a tin of .177 caliber pellets, three containers of Daisy 350 count BBs, and two red ShatterBlast targets with black stakes.
Your Daisy Powerline 901 Air Rifle Kit includes the following components:
- Daisy Powerline 901 Air Rifle
- 4x15 Scope with Rings
- Safety Glasses
- 500 Count .177 Caliber Pellets
- 750 Count BBs (typically in 3 containers of 250 or similar distribution)
- 8 ShatterBlast Targets with 2 Stakes
Setup
1. Scope Installation
- Carefully unbox the 4x15 scope and mounting rings.
- Attach the scope rings to the dovetail rail on top of the rifle receiver. Ensure they are securely tightened but do not overtighten.
- Place the scope into the rings, ensuring the reticle is level. Secure the top halves of the rings.
- Adjust the scope's position for proper eye relief once mounted.
2. Target Setup
- Insert the ShatterBlast targets onto the provided stakes.
- Place targets in a safe location with a secure backstop, away from any unintended objects or persons.
Operating Instructions
Loading BBs (Repeater Mode)
- Ensure the rifle is pointed in a safe direction.
- Locate the BB loading port on the side of the rifle.
- Open the loading port and pour up to 50 BBs into the reservoir.
- Close the loading port securely.
- To load a BB into the chamber, pull the bolt handle fully to the rear and then push it forward until it locks.
Loading Pellets (Single Shot)
- Ensure the rifle is pointed in a safe direction.
- Pull the bolt handle fully to the rear.
- Carefully insert one .177 caliber pellet into the breech, ensuring the skirt of the pellet is facing the rear.
- Push the bolt handle forward until it locks, seating the pellet.
Pumping the Rifle
- With the rifle pointed in a safe direction, grasp the forearm pump handle.
- Pump the handle fully open and then fully closed. Repeat this action for 3 to 10 pumps. More pumps result in higher velocity. Do not exceed 10 pumps.
Firing the Rifle
- Ensure the safety is engaged (ON).
- Aim at your target, ensuring a clear backstop.
- Disengage the safety (OFF).
- Place your finger on the trigger and slowly squeeze to fire.
Maintenance
- Regularly clean the barrel with a suitable cleaning rod and patches to remove lead and BB residue.
- Apply a small amount of silicone oil to the pump mechanism and pivot points periodically to ensure smooth operation.
- Store the rifle in a dry, secure location, unloaded and with the safety engaged.
- Inspect the scope mounts and other fasteners regularly and tighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| BBs/Pellets not loading or jamming | Improper loading, bent pellets, or residue in breech. | Ensure bolt is fully cycled. Use unbent pellets. Clean breech area. |
| Low velocity or inconsistent shots | Insufficient pumps, worn seals, or dirty barrel. | Ensure 3-10 full pumps. Inspect for air leaks. Clean barrel. |
| Scope not holding zero or inaccurate | Loose scope rings, faulty scope, or bent barrel. | Tighten scope rings. If issues persist, consider replacing the scope or contacting support for barrel inspection. |
| Charging handle difficult to operate | Lack of lubrication or internal obstruction. | Apply silicone lubricant to the charging handle and bolt mechanism. Check for any foreign objects. |
Specifications
- Model: Daisy Powerline 901
- Caliber: .177 (4.5mm)
- Ammunition: BBs and .177 Pellets
- Action: Multi-pump pneumatic (3-10 pumps)
- BB Capacity: 50-round repeater
- Pellet Capacity: Single-shot
- Velocity: Up to 750 fps (feet per second)
- Sights: Fiber optic front sight, Fully adjustable rear sight
- Weight: Approximately 3.2 lbs (rifle only)
- Barrel Material: Alloy Steel
- Frame Material: Plastic
- UPC: 039256859018
Warranty Information
The Daisy Powerline 901 Air Rifle Kit comes with a One year limited warranty. For warranty claims or service, please retain your proof of purchase and contact Daisy customer support. This warranty covers manufacturing defects and workmanship under normal use.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please visit the official Daisy Outdoor Products website or contact their customer service department. Always refer to your product model number (901) when seeking support.
Daisy Outdoor Products Official Website: www.daisy.com
