LUX Kono KN-S-MG1 Smart Thermostat User Manual

Introduction

This manual provides detailed instructions for the installation, setup, and operation of your LUX Kono KN-S-MG1 Smart Thermostat. Please read this manual thoroughly before beginning installation or operation to ensure proper functionality and safety.

The LUX Kono KN-S-MG1 is a programmable smart thermostat designed to personalize your home comfort and optimize energy savings through features like geofencing and remote control via the LUX app.

Safety Information

WARNING: Electrical Shock Hazard

• Always turn off power to the heating and cooling system at the main circuit breaker or fuse box before installing or servicing the thermostat.
• Improper wiring can cause damage to the thermostat or the HVAC system.
• Installation should be performed by a qualified technician if you are unsure about any steps.
• Ensure all wiring connections are secure and insulated.

Package Contents

Verify that all items are present in your package:

• LUX Kono KN-S-MG1 Smart Thermostat
• Mounting Hardware (screws, wall anchors)
• LUX Power Bridge (for systems without a C-wire)
• Installation Guide (this document)

Installation

Before installation, ensure the power to your HVAC system is turned off at the circuit breaker.

1. Remove Old Thermostat

1. Turn off power to your HVAC system at the circuit breaker.
2. Remove the cover of your old thermostat.
3. Take a picture of the wiring connections for reference.
4. Disconnect the wires one by one, labeling each wire with the corresponding terminal letter (e.g., R, C, Y, G, W).
5. Remove the old thermostat's backplate from the wall.

2. Wiring the Kono KN-S-MG1

The Kono KN-S-MG1 requires a C-wire for continuous power. If your system does not have a C-wire, use the included LUX Power Bridge.

Compatibility:

• Forced air, gas, oil & electric furnaces (up to 2 Heat/1 Cool stages)
• Heat pump systems (with or without auxiliary/emergency heat)

Refer to the wiring diagram specific to your HVAC system type. Connect the labeled wires to the corresponding terminals on the Kono backplate.

Image: Front view of the LUX Kono KN-S-MG1 Smart Thermostat, displaying its digital screen and control knob.

3. Mounting the Thermostat

1. Mount the Kono backplate to the wall using the provided screws and anchors. Ensure it is level.
2. Carefully push any excess wire back into the wall opening.
3. Align the Kono thermostat body with the backplate and gently push it into place until it clicks securely.

Image: The LUX Kono KN-S-MG1 Smart Thermostat installed on a wall, blending into a modern dining room environment.

Initial Setup and Wi-Fi Connection

1. Power On: Restore power to your HVAC system at the circuit breaker. The thermostat display should illuminate.
2. Download the LUX App: Download the official LUX app from your smartphone's app store.
3. Create Account: Follow the in-app instructions to create a new user account or log in if you already have one.
4. Connect to Wi-Fi: The app will guide you through connecting your Kono thermostat to your home Wi-Fi network. Ensure your Wi-Fi network is 2.4GHz compatible.
5. System Configuration: The app will prompt you to configure your HVAC system type (e.g., conventional, heat pump) and other settings.

Operating Instructions

Basic Operation

• Adjusting Temperature: Use the control knob on the thermostat or the LUX app to set your desired temperature.
• System Mode: Switch between Heat, Cool, Auto, and Off modes using the thermostat interface or the app.
• Fan Mode: Select Fan On (continuous operation) or Fan Auto (fan runs only when heating/cooling) via the thermostat or app.

Programming Schedules

The Kono KN-S-MG1 allows you to create custom heating and cooling schedules to optimize comfort and energy usage. Schedules are typically managed through the LUX app for ease of use.

• Open the LUX app and navigate to the scheduling section.
• Create daily or weekly schedules with different temperature settings for various times of the day (e.g., Wake, Away, Home, Sleep).
• Save your schedules to activate them on the thermostat.

Advanced Features

• Geofencing (Home & Away Aware): This feature uses your smartphone's location to automatically adjust the thermostat when you leave or approach your home, saving energy when away and ensuring comfort upon return. Enable and configure this feature within the LUX app.
• Remote Control: Control your thermostat from anywhere using the LUX app on your smartphone.
• Voice Control: The Kono KN-S-MG1 supports integration with certain smart home platforms like Android and Vera for voice control. Note: This product does NOT work with Amazon Alexa or Apple HomeKit.

Maintenance

• Cleaning: Wipe the thermostat's exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Software Updates: Ensure your LUX app and thermostat firmware are up to date for optimal performance and new features. Updates are typically managed through the LUX app.
• No Batteries Required: The Kono KN-S-MG1 is powered by your HVAC system (C-wire) or the LUX Power Bridge, so no battery replacement is necessary.

Troubleshooting

For further assistance, please contact LUX customer support.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official LUX website or contact LUX customer service directly. Keep your purchase receipt as proof of purchase.

Image: The retail packaging for the LUX Kono Smart Thermostat, showing the product image and key features.