1. Introduction
The AODELAN P12-N is a high-performance external battery pack designed to provide extended power and faster recycling times for compatible Nikon speedlights. It operates using 12 AA-type batteries, offering a stable power supply for demanding photography sessions. This manual provides essential information for the proper setup, operation, and maintenance of your P12-N battery pack.
1.1 What's Included
- 1 x AODELAN P12-N External Flash Battery Pack
- 1 x Carrying Case
- User Manual (this document)
Note: 12 AA batteries are not included and must be purchased separately.
2. Setup
2.1 Inserting Batteries
- Open the battery compartment cover on the AODELAN P12-N unit.
- Insert 12 AA-type batteries into the battery tray, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
2.2 Connecting to Your Flash Unit
- Locate the external power port on your compatible Nikon speedlight (e.g., SB-5000, SB-900, SB-910).
- Connect the coiled cable from the AODELAN P12-N battery pack to the external power port on your flash unit. Ensure the connector is fully inserted and secure.
- Mount the AODELAN P12-N to your camera rig or belt using the provided carrying case for convenience.
3. Operating Instructions
Once connected, the AODELAN P12-N will provide power to your flash unit, significantly improving its performance.
3.1 Powering On/Off
The battery pack does not have a separate power switch. It draws power as needed by the flash unit. Ensure your flash unit is powered on for the battery pack to function.
3.2 Performance Benefits
- Faster Recycle Times: Expect approximately 1-second full power recycle times, allowing for quicker consecutive shots.
- Extended Shot Capacity: Provides around 680 full-power flashes with compatible speedlights, extending your shooting duration.
- Stable Power Supply: The 12 AA battery configuration ensures a consistent and stable power output to your flash.
4. Maintenance
4.1 Battery Care
- Always use high-quality AA batteries. NiMH batteries are recommended for optimal performance and reusability.
- Replace all 12 batteries simultaneously to ensure consistent power delivery. Do not mix old and new batteries, or different battery types.
- Remove batteries from the unit if it will not be used for an extended period to prevent leakage and damage.
4.2 Cleaning and Storage
- Clean the exterior of the battery pack with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep the connectors free from dust and debris.
5. Troubleshooting
If you encounter issues with your AODELAN P12-N, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash not firing or slow recycle time | Low or depleted batteries in the P12-N. Incorrect battery insertion. Loose connection to flash. | Replace all 12 AA batteries. Check battery polarity. Ensure the cable is securely connected to both the P12-N and the flash unit. |
| P12-N feels warm during use | Normal operation during rapid firing. Excessive use without cooling. | A slight warmth is normal. If it becomes excessively hot, discontinue use and allow it to cool down. Avoid continuous rapid firing for extended periods. |
| Flash not recognizing external power | Incompatible flash model. Faulty cable or connector. | Verify your flash model is compatible (Nikon SB-5000, SB-900, SB-910). Check the cable for damage. Ensure the connection is firm. |
6. Specifications
| Brand | AODELAN |
| Model Name | P12-N |
| Compatible Flash Models | Nikon SB-5000, SB-900, SB-910 |
| Battery Type | 12 x AA batteries (NiMH recommended) |
| Battery Cell Composition | NiMH |
| Voltage | 12 Volts |
| Item Dimensions (L x W x H) | 4.13 x 3.35 x 8.58 inches |
| Item Weight | 0.4 Kilograms (without batteries) |
| Recycle Time (Full Power) | Approximately 1 second |
| Full Power Shots | Approximately 680 shots |
7. Warranty Information
The AODELAN P12-N External Flash Battery Pack comes with a 1-Year Manufacturer's Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover damage caused by:
- Improper installation or use.
- Unauthorized repairs or modifications.
- Accidents, abuse, or neglect.
- Use of incompatible accessories or batteries.
Please retain your proof of purchase for warranty claims.
8. Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact AODELAN customer support through their official website or the retailer where the product was purchased.
You can visit the AODELAN store for more information: AODELAN Official Store