CINOTON 26W LED Wall Pack Light

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your CINOTON 26W LED Wall Pack Light. This outdoor security flood light features a dusk-to-dawn sensor, providing efficient and reliable illumination for various outdoor environments.

Image: Two CINOTON 26W LED Wall Pack Lights, showcasing their design and bronze finish.

2. Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always turn off power at the circuit breaker before installing or servicing the fixture.
• Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
• Do not attempt to modify the fixture. Any modifications will void the warranty and may create safety hazards.
• Ensure the input voltage (100-277Vac) matches your electrical supply.
• This product is IP65 waterproof, suitable for outdoor use, but should not be submerged in water.
• Avoid looking directly into the LED light source when illuminated, as it may cause eye strain.

3. Package Contents

Verify that all components are present and undamaged before beginning installation.

• 2 x 26W LED Wall Pack Flood Lights
• 6 x Spiral Caps (Wire Nuts)
• 1 x Instruction Manual (this document)

4. Specifications

Image: Product dimensions for the CINOTON LED Wall Pack Light.

Image: The light is designed to be all-weather resistant, including IP65 waterproof, frost resistant (-4°F), and storm resistant.

5. Installation

Follow these steps for proper installation. Ensure power is OFF at the circuit breaker before starting.

5.1 Mounting Options

The CINOTON Wall Pack Light supports both direct wall mount and conduit mount installations, suitable for various outdoor wiring scenarios.

Image: Illustration of direct wall mount and conduit mount installation methods.

5.2 Step-by-Step Installation

1. Remove the Lens: Remove the two screws securing the lens to the rear housing and set the lens aside.
2. Loosen Reflector Screws: Loosen the two screws enough to allow the reflector to slide upward until the keyhole releases from the screws. Remove the reflector.
3. Knock Out Holes: Knock out appropriate holes for wiring and mounting screws. Fasten the fixture to the outlet box or wall using the provided gasket.
4. Complete Wiring: Connect the three wires (Hot, Common/Neutral, Ground) from the fixture to your power source using the spiral caps (wire nuts). Ensure secure connections.
5. Install Reflector: Reinstall the reflector, ensuring it is properly seated and secured by tightening the screws.
6. Install Lens: Reattach the lens to the housing using the two screws removed in step 1.

Image: Step-by-step visual guide for the installation process.

Image: Illustration of interior and external wire layouts for installation.

6. Operating Instructions

The CINOTON 26W LED Wall Pack Light is equipped with an automated dusk-to-dawn photocell sensor for convenient operation.

• Automatic ON: The light will automatically turn ON at sundown or when ambient light levels drop sufficiently (e.g., at night).
• Automatic OFF: The light will automatically turn OFF at sunrise or when ambient light levels increase sufficiently (e.g., during daytime).
• Ensure there are no obstructions blocking the photocell sensor, as this may interfere with its proper function.

Image: Visual explanation of the dusk-to-dawn photocell sensor operation.

7. Maintenance

The CINOTON LED Wall Pack Light requires minimal maintenance.

• Cleaning: Periodically clean the lens and housing with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
• Inspection: Regularly inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, consult a qualified electrician.
• Do not attempt to replace the LED bulbs, as they are integrated and designed for the lifespan of the fixture.

8. Troubleshooting

If you encounter issues with your CINOTON LED Wall Pack Light, refer to the following common problems and solutions:

9. Warranty and Support

CINOTON provides a limited warranty for this product. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official CINOTON website.

For technical support, troubleshooting assistance, or warranty claims, please contact CINOTON customer service through the following channels:

• Visit the CINOTON Brand Store on Amazon for more information and contact options.
• Refer to the original packaging for direct contact details.

Note on Videos: No official product videos from the seller were found that met the criteria for inclusion in this manual.