Introduction
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Ohaus Valor 2000 Scale, model V22PWE15T. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
The Ohaus Valor 2000 is designed for demanding food preparation, processing, and portioning applications, featuring a durable polycarbonate keypad and a flow-thru design for easy cleaning in wet environments. It is NSF Certified.
Safety Precautions
- Always operate the scale on a stable, level surface.
- Do not overload the scale beyond its maximum capacity of 15 kg (30 lb).
- Avoid exposing the scale to extreme temperatures or direct sunlight for prolonged periods.
- Ensure the AC adapter is properly connected and the rechargeable battery is charged for optimal performance.
- Keep the scale clean, especially after use in wet environments, to maintain hygiene and functionality.
Product Overview
Figure 1: Front view of the Ohaus Valor 2000 Scale. It features a stainless steel weighing platform, a white and grey body, and a red LED display showing "0.0". The Ohaus logo is visible on the left side of the display, and control buttons for "On/Zero" and "Tare/Cal" are located below the display. Four red adjustable feet are visible at the base.
The Ohaus Valor 2000 Scale (V22PWE15T) is a high-performance food scale designed for durability and ease of use in demanding environments. Key features include:
- Polycarbonate Keypad: Resistant to knives and sharp instruments.
- Flow-Thru Design: Facilitates easy cleaning and prevents water accumulation.
- Fast Stabilization: Less than half a second stabilization time.
- Dual LED Displays: Front and rear displays for efficient multi-operator use.
- Construction: Stainless Steel platform.
- Power: AC Adapter (Included), Rechargeable Battery (Included).
Setup
- Unpacking: Carefully remove the scale and all accessories from the packaging. Retain packaging for future transport or storage.
- Placement: Place the scale on a firm, level, and stable surface, free from vibrations and drafts.
- Leveling: Adjust the four red adjustable feet at the base of the scale until the bubble in the spirit level (if present, typically near the display) is centered. This ensures accurate weighing.
- Power Connection:
- Connect the included AC adapter to the power input port on the scale and then to a suitable power outlet.
- The internal rechargeable battery will begin charging automatically. Allow sufficient time for the battery to fully charge before initial use for optimal battery life.
- Initial Power On: Press the On/Zero button to turn on the scale. The display will perform a self-test and then show "0.0".
Operating Instructions
Weighing Procedure
- Power On: Ensure the scale is turned on and displays "0.0". If not, press the On/Zero button.
- Zeroing: If the display does not show "0.0" with nothing on the platform, press the On/Zero button to zero the scale.
- Placing Item: Carefully place the item to be weighed onto the center of the stainless steel platform.
- Reading Weight: Wait for the display to stabilize (less than half a second). The stable weight will be shown on both the front and rear LED displays.
- Removing Item: Remove the item from the platform. The display will return to "0.0" or a negative value if tare was used.
Tare Function
The tare function allows you to subtract the weight of a container or packaging, so only the net weight of the contents is measured.
- Place the empty container onto the weighing platform. The display will show the container's weight.
- Press the Tare/Cal button. The display will reset to "0.0", indicating the container's weight has been tared out.
- Place the contents into the container. The display will now show only the weight of the contents.
- To clear the tare, remove both the container and its contents from the platform. The display will show a negative value equal to the tared weight. Press the Tare/Cal button again to return to "0.0".
Unit Conversion
The Valor 2000 supports multiple weighing units: g, kg, lb, oz, lb:oz.
To change the weighing unit, refer to the specific instructions in the full product manual or contact Ohaus support. Typically, this involves a specific button sequence or menu navigation not detailed on the basic control panel.
Maintenance
Cleaning
The Valor 2000 is designed for easy cleaning due to its flow-thru design and durable construction.
- Disconnect the scale from the power supply before cleaning.
- Use a damp cloth with mild detergent to clean the stainless steel platform and the scale body.
- Avoid abrasive cleaners, solvents, or harsh chemicals that could damage the polycarbonate keypad or other surfaces.
- Ensure no liquid enters the internal components. The flow-thru design helps, but direct spraying should be avoided.
- Dry the scale thoroughly after cleaning.
Battery Care
- For optimal battery life, fully charge the battery before first use.
- If the scale will not be used for an extended period, charge the battery periodically (e.g., every 3 months) to prevent deep discharge.
- Replace the battery if its capacity significantly diminishes over time. Refer to Ohaus service for battery replacement.
Calibration
Regular calibration ensures the accuracy of your scale. The Valor 2000 features a calibration function accessible via the Tare/Cal button.
- Ensure the scale is on a stable surface and nothing is on the platform.
- Consult the full Ohaus Valor 2000 manual for detailed calibration steps, as specific weight standards and procedures are required. Incorrect calibration can lead to inaccurate measurements.
- If you do not have calibration weights, contact a certified calibration service.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scale does not turn on. | No power, discharged battery, faulty AC adapter. | Check AC adapter connection and power outlet. Charge battery. If problem persists, contact support. |
| Inaccurate readings. | Scale not level, unstable surface, needs calibration, overload. | Level the scale. Place on a stable surface. Perform calibration. Do not exceed capacity. |
| Display shows "Err" or error code. | Overload, internal error. | Remove weight from platform. Turn scale off and on again. If error persists, contact support. |
| Slow stabilization. | Vibrations, drafts, unstable surface. | Ensure scale is on a stable, vibration-free surface. Avoid drafts. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | V22PWE15T |
| Capacity | 15 kg × 0.002 kg, 15000 g × 2 g, 30 lb × 0.005 lb, 480 oz × 0.1 oz, 30 lb × 0.1 oz (lb:oz) |
| Units | g, kg, lb, oz, lb: oz |
| Platform Size | 9.5 in x 7.5 in |
| Construction | Stainless Steel (Platform) |
| Power | AC Adapter (Included), Rechargeable Battery (Included) |
| Display Type | LED (Front and Rear) |
| Product Dimensions | 17 x 15 x 9 inches |
| Product Weight | 6.6 Pounds |
| Special Feature | High-Performance Food Scale, Suitable for Harsh, Wet Workplace Conditions, NSF Certified |
Warranty and Support
Ohaus products are manufactured under strict quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Ohaus website. Keep your purchase receipt as proof of purchase.
For technical support, service, or to order replacement parts, please contact Ohaus customer service or your local authorized Ohaus dealer. Provide your model number (V22PWE15T) and serial number (if applicable) when contacting support.
Ohaus Official Website: www.ohaus.com