Puig Retro Semi Fairing 8934W Instruction Manual

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Puig Retro Semi Fairing 8934W. This fairing is specifically designed for Yamaha XSR900 models manufactured between 2016 and 2019. Please read these instructions thoroughly before proceeding with installation or use to ensure safety and optimal performance.

2. Product Overview

The Puig Retro Semi Fairing 8934W is crafted from highly resistant Acrylonitrile Butadiene Styrene (ABS) material, offering protection against wind and minor impacts. Its design complements the vintage aesthetic of retro motorcycles while enhancing rider comfort. The fairing includes a transparent screen and is available in various finishes. It has been tested by the German TÜV and holds ABE 39524 certification.

Figure 1: Puig Retro Semi Fairing 8934W mounted on a Yamaha XSR900.

3. Safety Information

Always prioritize safety during installation and use. Improper installation can lead to serious injury or damage to your motorcycle. If you are unsure about any step, consult a qualified motorcycle mechanic.

• Ensure the motorcycle is stable and turned off before beginning installation.
• Wear appropriate personal protective equipment, such as gloves and eye protection.
• Do not overtighten fasteners, as this can damage components. Refer to your motorcycle's service manual for torque specifications if available.
• Regularly check all mounting points for tightness, especially after the first few rides.
• Ensure the fairing does not obstruct your view or interfere with the motorcycle's controls.

4. Setup and Installation

The Puig Retro Semi Fairing 8934W is designed for specific fitment on the Yamaha XSR900 (2016-2019). Installation typically involves mounting the fairing to the motorcycle's headlight area using a specific adhesive kit provided for popular models. For universal applications, a separate mounting kit is available.

4.1 Pre-Installation Check

• Verify that all components are present and undamaged.
• Confirm the fairing's headlight diameter compatibility (195mm or 180mm) matches your motorcycle.
• Clean the installation area on your motorcycle thoroughly to ensure proper adhesion and fit.

4.2 Installation Steps (General Guidance)

1. Position the fairing against the motorcycle's headlight to determine the optimal mounting points.
2. Attach the specific support bracket and adhesive kit (if applicable) according to the detailed instructions provided with the kit.
3. Secure the fairing to the support bracket using the provided fasteners. Ensure a snug but not overly tight fit.
4. Check for proper clearance with handlebars, mirrors, and other components through the full range of steering.
5. Once installed, gently shake the fairing to confirm it is securely attached and does not wobble.

Note: Specific installation instructions for your motorcycle model and fairing type are included with the product packaging. Always refer to those detailed instructions for precise steps.

5. Operating and Usage

The Puig Retro Semi Fairing is designed to improve your riding experience by deflecting wind and enhancing the motorcycle's aesthetic. Once properly installed, no special operation is required. The fairing functions passively to provide wind protection.

• Wind Protection: The fairing reduces wind pressure on the rider's chest and head, contributing to a more comfortable ride, especially at higher speeds.
• Aesthetic Enhancement: Its retro design integrates seamlessly with the Yamaha XSR900, enhancing its vintage appeal.

6. Maintenance

Regular maintenance will prolong the life and appearance of your fairing.

• Cleaning: Clean the fairing and screen with mild soap and water using a soft cloth. Avoid abrasive cleaners or solvents, as these can damage the ABS material and screen finish.
• Inspection: Periodically inspect all mounting hardware for tightness. Vibrations from riding can cause fasteners to loosen over time.
• Damage: In case of damage to the fairing or screen, consider replacement to maintain safety and performance.

7. Troubleshooting

If you encounter issues with your fairing, consider the following common troubleshooting steps:

• Vibration/Rattling: Check all mounting bolts and screws. Ensure they are securely tightened. Loose fasteners are the most common cause of vibration.
• Poor Fit: Re-check the installation steps. Ensure the fairing is correctly aligned and that no components are interfering with its seating. Verify that the correct fairing model for your motorcycle and headlight size was installed.
• Reduced Visibility (Screen): Clean the screen thoroughly. If scratches or hazing persist, the screen may need to be replaced.
• Excessive Wind Buffeting: While the fairing is designed to reduce wind, individual rider height and helmet type can influence buffeting. Experiment with riding posture.

If problems persist after attempting these steps, contact Puig customer support or a professional motorcycle mechanic.

8. Specifications

9. Warranty and Support

For information regarding product warranty, please refer to the documentation included with your purchase or contact Puig directly through their official website. For technical support or assistance with installation, please reach out to your authorized Puig dealer or the retailer from whom you purchased the product.